Resumen del contenido incluido en la página 1
User’s manual
TL7601
DECT 6.0 remote dial pad
for use with AT&T models
TL7610/TL7611/
TL7650/TL7651
Resumen del contenido incluido en la página 2
Congratulations on your purchase of this AT&T product. Before using this AT&T product, please read the Important safety information on pages 26-29 of this manual. Please thoroughly read the user’s manual for all the feature operations and troubleshooting information necessary to install and operate your new AT&T product. You can also visit our website at www.telephones.att.com or call 1 (800) 222-3111. In Canada, dial 1 (866) 288-4268. Model #: TL7601 Type: Remote dial pad Serial #:
Resumen del contenido incluido en la página 3
Parts checklist Check to make sure the remote dial pad package includes the following items: User’s manual TL7601 DECT 6.0 remote dial pad for use with AT&T models TL7610/TL7611/ TL7650/TL7651 User's manual Dial pad Charger for dial pad with power adapter installed Battery for dial pad Battery compartment cover Belt clip for dial pad
Resumen del contenido incluido en la página 4
User’s manual TL7601 DECT 6.0 remote dial pad for use with AT&T models TL7610/TL7611/ TL7650/TL7651 Table of contents Getting started Quick reference guide .................................................................................1 Installation preparation ..............................................................................2 Charger installation ......................................................................................3 Battery installation & charging .............
Resumen del contenido incluido en la página 5
Using the headset ........................................................................12 Last number redial ............................................................................12 Options while on calls ..........................................................................14 Call waiting ...........................................................................................14 Last number redial ......................................................
Resumen del contenido incluido en la página 6
Getting started Quick reference guide DELETE Loop While reviewing the redial memory, press to You can string a neck or delete an individual entry, wrist cord (not provided) or press to clear the through this loop. redial history (page 13). While predialing, press to delete digits (page 11). LANG/SEL up/ down Press to review and change language options (page 10). When you are not using Press again to save the the dial pad, press to setting. view the redial memory. Then press or
Resumen del contenido incluido en la página 7
Getting started Installation preparation You must install and See pages 4-5 charge the battery before for easy instructions. STOP! using the remote dial pad. Your product may be shipped with a protective sticker covering the remote dial pad display - remove it before use. For customer service or product information, visit our website at www.telephones.att.com or call 1 (800) 222-3111. In Canada, dial 1 (866) 288-4268. Avoid placing the remote dial pad too close to: • Communication devices
Resumen del contenido incluido en la página 8
Getting started Charger installation 1. Make sure the small 2. Plug the power end of the power adapter into a power adapter is plugged into outlet not controlled the jack on the back of by a wall switch. the charger, and then make sure that the cord is routed behind the tab as shown. IMPORTANT INFORMATION 1. Use only the power adapter supplied with this product. To order a replacement power adapter, visit our website at www.telephones.att.com, or call 1 (800) 222-3111. In Canada dial 1
Resumen del contenido incluido en la página 9
Getting started Battery installation & charging Install the battery as shown below. After installing the battery, place the remote dial pad in the charger. For optimal performance, charge the remote dial pad battery for at least six hours before use. Step 1 Step 2 Step 3 Insert the battery Place the Align the cover plug securely into battery in the flat against the jack located compartment with the battery inside the remote the label THIS compartment, dial pad battery SIDE UP facing u
Resumen del contenido incluido en la página 10
Getting started Battery installation & charging Step 4 CHARGE light Charge the remote dial pad by placing it face up in the charger. The CHARGE light is on when the dial pad battery is charging. NOTE: 1. When the battery is charging, you will see the cycling . When the battery is fully charged, you will see . 2. If the display on the remote dial pad is blank, try unplugging the power adapter, and firmly plugging it in again. IMPORTANT INFORMATION Use only the supplied rechargeable
Resumen del contenido incluido en la página 11
Getting started Remote dial pad registration and de-registration The TL7601 remote dial pad allows you to place phone calls with an AT&T DECT 6.0 cordless headset system. You must register it to the TL7610/TL7611/TL7650/TL7651 headset base before use. The remote dial pad should be charged for a minimum of five minutes before attempting registration to the headset base. You cannot register the dial pad to the headset base before a headset is registered to the headset base. The remote dial p
Resumen del contenido incluido en la página 12
Getting started Remote dial pad registration and de-registration (until the red MUTE light on the headset PLEASE WAIT... base turns on) and then release the button. The remote dial pad shows PLEASE WAIT..., then DIAL PAD REGISTERED. It takes about 30 seconds to complete the DIAL PAD registration. REGISTERED 1 4. The MUTE light turns off and you see DIAL PAD the DIAL PAD screen (shown on the left) indicating successful registration. 1 Register the remote dial pad to the headset base (wi
Resumen del contenido incluido en la página 13
Getting started Remote dial pad registration and de-registration De-register the remote dial pad Please read carefully through all the instructions on this page before beginning the de-registration process. This de-registration de-registers all the items registered to the headset base, including all headsets and the remote dial pad. 1. Press and hold the PAIR button on the headset base until the MUTE light starts to flash, then release the PAIR button. Flashes 2. Immediately press and re
Resumen del contenido incluido en la página 14
Getting started Belt clip To attach the To remove the belt clip: belt clip: Gently lift either of Snap the belt clip the belt clip retaining into the retaining tabs, shown in the tabs on both sides figure, to remove the of the dial pad as belt clip from the dial shown in the figure. pad. 9
Resumen del contenido incluido en la página 15
Remote dial pad operation Remote dial pad settings Language You can select the language used for all screen displays. To select a language: 1. Press LANG/SEL when in idle mode. LANGUAGE ENGLISH 2. Use / to scroll to ENGLISH, FRANCAIS 1 or ESPANOL. 3. Press LANG/SEL again to save your DIAL PAD preference and return to the idle mode. 1 10
Resumen del contenido incluido en la página 16
Remote dial pad operation Basic operation Make a call To make a call: Elapsed time • Press ON/OFF on the headset to turn on the headset, then enter the telephone number on the dial pad, and press CALL/FLASH on the PHONE 0:00:30 remote dial pad. 1-234-5678 1 -OR- • Press ON/OFF on the headset to turn on the headset, then press CALL/FLASH on the remote dial pad, and enter the telephone number on the dial pad. To end a call: • Press OFF/CLEAR on the remote dial pad. ENDED 0:00:
Resumen del contenido incluido en la página 17
Remote dial pad operation Basic operation Answer a call Using the remote dial pad: INCOMING • Press CALL/FLASH CALL 1 -OR- • Press any key (0-9, * or #) on the remote dial pad. To end a call: • Press OFF/CLEAR. Using the headset: • Press ON/OFF on the headset. To end a call: • Press ON/OFF on the headset. DIAL PAD NOTE: When another headset or telephone is using the telephone line, LINE IN USE appears on the screen. Press LINE IN USE CALL/Flash during a call to see the elapsed ca
Resumen del contenido incluido en la página 18
Remote dial pad operation Basic operation Last number redial (continued) To remove a number: • While the desired number is displayed, press DELETE to delete the displayed number from the redial memory. To edit a number: • While the desired number is displayed, press LANG/SEL to enter the editing mode, then press OFF/CLEAR or DELETE to make corrections. • While entering digits, press PAUSE to insert a dialing pause. 1-234-567p 1 13
Resumen del contenido incluido en la página 19
Remote dial pad operation Options while on calls Call waiting If you subscribe to call waiting service with PHONE 0:00:30 your local telephone service provider, you 1-234-5678 will hear a beep in the headset if there is an 1 incoming call while you are already on a call. Press CALL/FLASH on the remote dial pad or press and hold the MUTE/FLASH key on the headset to put your current call on hold and take the new call. Press CALL/FLASH on the remote dial pad or press and hold the MUTE
Resumen del contenido incluido en la página 20
Remote dial pad operation Screen icons & display screen messages Screen icons PHONE 0:00:30 1 1-234-5678 The remote dial pad works with headset 1. 1 2 The remote dial pad works with headset 2. The telephone line is in use. Battery charging (animated display). Display screen messages The remote dial pad with a low CHARGING battery has been placed in the remote dial pad charger. The remote dial pad is CONNECTING ... registering to the headset base, or has lost communication with the heads
