Resumen del contenido incluido en la página 1
User’s manual
E5804
5.8 GHz cordless
telephone with caller
ID/call waiting
Resumen del contenido incluido en la página 2
Congratulations on purchasing your new AT&T product. Before using this AT&T product, please read the Important safety instructions on pages 38-40 of this manual. Please thoroughly read the user’s manual for all the feature operations and troubleshooting information necessary to install and operate your new AT&T product. You can also visit our website at www.telephones.att.com or call 1 (800) 222-3111. In Canada dial 1(866) 288-4268. Model #: E5804 Product name: 5.8GHz cordless telephone Serial
Resumen del contenido incluido en la página 3
You must install and charge See page 7 the battery before using the STOP! for easy instructions. telephone. For customer service or product information, visit our website at www.telephones.att.com or call 1 (800) 222-3111. In Canada dial 1 (866) 288-4268. CAUTION: To reduce the risk of fire or injury to persons or damage to the telephone, read and follow these instructions carefully: 89-0047-00-00) or equivalent. To order a replacement battery, visit our website at www.telephones.
Resumen del contenido incluido en la página 4
User’s manual E5804 5.8 GHz cordless telephone with caller ID/call waiting Table of contents Getting started Caller ID summary Quick reference guide.........................2 ..............................24 Parts checklist.........................................4 To review the call summary .........27 Telephone base installation.............5 ........28 Battery installation & charging......7 Add entries to the directory.........29 Installation options...............................8 Appen
Resumen del contenido incluido en la página 5
Getting started Quick reference guide Cordless handset CID/-VOLUME DIR /VOLUME+ While in a menu, press to scoll While in a menu, press to scoll down. When in idle mode, press up. When in idle mode, press to to display call summary entries display directory entries (page 22). (page 27). While entering names While entering names, press to or numbers, press to move the press DIR to increase listening press CID to decrease listening volume. volume. OFF/CLEAR PHONE/FLASH Pr
Resumen del contenido incluido en la página 6
Getting started Quick reference guide Telephone base VOICEMAIL Flashes when there is new voicemail (requires voicemail service from your local telephone company). CHARGE/IN USE HANDSET LOCATOR Press to make the handset beep when the handset is not on the telephone to charge in the telephone base. Flashes quickly while an incoming call is ringing. 3
Resumen del contenido incluido en la página 7
Getting started Parts checklist Save your sales receipt and original packaging in case you need to ship your telephone for warranty service. number of your telephone can be found on the label located on the bottom of the telephone base. User’s manual Quick start guide E5804 E5804 5.8 GHz cordless 5.8 GHz cordless Telephone with caller Telephone with caller ID/call waiting ID/call waiting User's manual Quick start guide Telephone base Battery for cordless handset B
Resumen del contenido incluido en la página 8
Getting started Telephone base installation connected to a wall switch. The telephone base can be placed on a flat sur- face or mounted on a standard wall plate. For optimum range and better reception, place the telephone base in a high and open location. Avoid placing the telephone base too close to: or other cordless telephones. ovens, refrigerators, or fluorescent lighting. work bench. 5
Resumen del contenido incluido en la página 9
Getting started Telephone base installation 1. Plug the small end of the larger power adapter into the power jack at the bottom of the tele- phone base. 2. Plug one end of the telephone line cord into the telephone jack at the bottom of the telephone base. 3. slots. 5. Plug the other end of the telephone line cord into a telephone jack. 4. Plug the large end of the larger power adapter into an electrical outlet Telephone line cord not controlled by a wall switch. see
Resumen del contenido incluido en la página 10
Getting started Battery installation & charging After installing the battery, you may be able to make or receive short calls. For hours before use. You can keep the battery charged by returning the handset to the telephone base after use. When the battery is fully depleted, a recharge takes about 12 hours. The average talk time on a fully charged battery is about five hours, and conditions and age of battery. 1. Insert the plug as indicated. 2. Place the battery 3.
Resumen del contenido incluido en la página 11
Getting started Installation options NOTE: The mounting bracket must be used for both tabletop use and wall mounting positions. Tabletop mount Wall mount Telephone outlet mounting plate with mounting studs Wall mounting The telephone base comes with the bracket mounted for tabletop use. If wall mounting is desired, a telephone outlet wall mounting plate with mounting studs is required. This mounting plate with studs may be available for purchase from many hardware or consumer electronics
Resumen del contenido incluido en la página 12
Getting started Installation options 3. To attach the bracket for wall mounting, insert the tabs of the bracket into slots and on the telephone base, then press the other bracket tabs into slots and as shown on the right. 4. Plug the power adapter into an electrical outlet not controlled by a wall switch. Plug the telephone line cord into a telephone wall jack. To mount the telephone on the wall, position the mounting holes and over the telephone outlet mounting studs. Press and sli
Resumen del contenido incluido en la página 13
Getting started Belt clip & optional headset Install belt clip as shown below if desired. Snap belt clip into notches on both sides of handset. To release belt clip from handset, lift one side of the belt clip out of the notch. For hands-free telephone conversations, use any industry standard 2.5 mm headset (purchased separately). For best results, use an AT&T 2.5 mm headset. To order an AT&T 2.5 mm headset, visit our website at www.telephones.att.com or call 1 (800) 222-3111. In Canad
Resumen del contenido incluido en la página 14
Telephone operation Settings Use the MENU/SELECT to change the handset set- tings. Follow the steps below to program the cordless handset. To stop at any time, press OFF/CLEAR. Language The default language for the handset screen displays is English. To change the language to Espanol, or Francais: 1. Press MENU/SELECT. 2. Press CID or DIR until the screen displays LANGUAGE. 3. Use MENU/SELECT to change the current set- ting. 4. Press CID or DIR 5. Press MENU/SELECT to confirm your se
Resumen del contenido incluido en la página 15
Telephone operation Settings Selectable ringer melodies 1. Press MENU/SELECT to begin programming. 2. Press CID or DIR until the screen displays RINGER: and the current setting. 3. Use MENU/SELECT to change the current setting. 4. Press CID or DIR to display 1, 2, 3, 4 or OFF. You will hear a sample of each ringer sound. 5. Press MENU/SELECT to choose displayed ringer NOTE: If you choose OFF, the cordless handset ringer will be turned off, and the screen will display RINGER OFF and w
Resumen del contenido incluido en la página 16
Telephone operation Settings Choose ringer volume setting 1. Press and hold CID or DIR when the cordless handset is idle (not in use). This feature allows you to choose low, med, high ringer volume or turn the ringer off. 2. Press CID or DIR to choose the desired option. You will hear a sample of each ringer volume. 3. Press MENU/SELECT to choose blinking ringer NOTE: If you choose OFF, the handset ringer will be turned off, and the screen will display RINGER OFF and AM
Resumen del contenido incluido en la página 17
Telephone operation Basic operation Making and answering calls Elapsed CID, DIR and OFF/CLEAR). To make a call, time press PHONE/FLASH or SPEAKER, then dial a number. Press OFF/CLEAR to hang up. To predial (preview numbers before dialing), enter numbers first, then press PHONE/FLASH or SPEAKER to dial. Press CID then CHAN/DELETE anytime to make corrections when entering num- bers. The screen displays the elapsed time of the current call (in hours, minutes and seconds). NOTES: 1.
Resumen del contenido incluido en la página 18
Telephone operation Basic operation Last number redial While the phone is not in use, press REDIAL/PAUSE on the cordless handset to display the last number called (up to 32 digits). To dial the number dis- played, press PHONE/FLASH or SPEAKER. after pressing PHONE/FLASH or SPEAKER, press REDIAL/PAUSE to call the last number dialed. To delete this number, press REDIAL/PAUSE twice when the phone is not in use. This will clear the silenced redial memory and leave it blank. Press OFF/CLEAR Tem
Resumen del contenido incluido en la página 19
Telephone operation Basic operation Handset locator If you misplace the handset, press HANDSET LOCATOR on the telephone base. This starts the help you locate it. To stop the paging tone, press OFF/CLEAR on handset, or place handset in the telephone base, or press the HANDSET LOCATOR on the telephone base. NOTE: If the handset is charging in the telephone base, pressing HANDSET LOCATOR does not generate a paging tone.
Resumen del contenido incluido en la página 20
Telephone operation Options while on calls Volume control Press CID/-VOLUME to decrease the volume. Press DIR /VOLUME+ to increase the volume. When changing the volume level, the new setting is saved. Call waiting If you subscribe to call waiting service with your local telephone company, there will be a beep if there is an incoming call while you are already on a call. Press PHONE/FLASH to put your current call on hold and take the new call. Press PHONE FLASH anytime to switch back and
