Resumen del contenido incluido en la página 1
Resumen del contenido incluido en la página 2
Resumen del contenido incluido en la página 3
11. To reduce the risk of electric shock. do not disassemble this product. Take it to qualified Important Safety Instructions service personnel when service or repair work is required. Opening or removing covers may When using your telephone equipment, these basic expose you to dangerous voltages or other safety precautions should always be followed to risks. Incorrect reassembly can cause electric reduce the risk of fire, electrical shock, and injury to shock when the appliance is subsequently
Resumen del contenido incluido en la página 4
Battery Safety Precautions Introduction Caution: To reduce the risk of fire or injury to Congratulations on your purchase of the Uniden persons by the battery read and follow XC610 Series/XC710 Cordless Telephone. This these instructions: phone is designed to exacting standards which provide reliability, long life, and outstanding 1. Use only the appropriate type and size Battery performance. Pack specified in this Operating Guide. Note: Do not dispose of the Battery Pack in a fire. The 2. This
Resumen del contenido incluido en la página 5
Important Electrical Considerations Included with the XC610 Series/XC710 . Unplug all electrical appliances when you know an If any of these items are missing or damaged, electrical storm is approaching. Lightning can pass contact the place of purchased. through your household wiring and damage any device connected to it. This phone is no exception. Warning: Please do not attempt to unplug any appliance during an electrical storm. Caution: Changes or modifications to this product not expressly a
Resumen del contenido incluido en la página 6
Radio Interference Installation Radio interference may occasionally cause buzzing and humming in your cordless Handset, or clicking Selecting a Location noises in the Base Unit. This interference is caused by external sources such as TV, refrigerator, vacuum Before choosing a location for your new phone, there cleaner, fluorescent lighting, or electrical storm. Your are some important guidelines you should consider: unit is NOT DEFECTIVE. If these noises continue and are too distracting, please
Resumen del contenido incluido en la página 7
3. Place the AC Adapter Applying Power to the Base Unit cord around the strain relief. All the XC610 Series/XC710 Cordless Telephone requires an AC outlet, and the included AC adapter. To relieve strain on the DC plug when the phone is placed on a desk or table, connect the adapter as shown below. 4. Plug one end of the long telephone cord into the TEL LINE jack on the Base Unit. Wrap the power cord around the convenient notch on the bottom. Place the power cord so that it does not Important cre
Resumen del contenido incluido en la página 8
Place the AC Adapter 3. Wall Installation cord inside the molded channel. Before mounting your phone, consider the following: l Select a location away from electrical cables, pipes, or other items behind the mounting location that could cause a hazard when inserting screws into the wall. l Make sure the wall material is capable of supporting the weight of the Base Unit and Handset. 4. Plug one end of the l Use screws with anchoring devices suitable long telephone cord for the wall material where
Resumen del contenido incluido en la página 9
7. Plug the other end of 3. Put the retainer back the telephone line cord into its slot on the into the wall jack. Base Unit. 8. Plug the AC Adapter into a standard 230/ 240 AC wall outlet. 4. Push down on the Handset retainer until it snaps into place. Setting the Handset Retainer The handset retainer holds the Handset in place if your phone is mounted on a wall. The steps below describe how to remove and replace the retainer so that the tab faces up. 1. Push up on the Handset retainer on the B
Resumen del contenido incluido en la página 10
4. Place the battery pack Setting Up Your Phone inside the battery compartment, and Extending the Antenna slide the battery cover back on. Before using your phone, be sure to raise its antenna to the vertical position. Note: The built-in Memory Backup feature allows up to 3 minutes to disconnect the old battery pack and install a new one without losing any numbers stored in memory Cleaning the Battery Contacts To maintain a good charge, it is important to clean all charging contacts on the Hands
Resumen del contenido incluido en la página 11
Charging from the Charging Cradle Charging the Battery Pack (Only for the XC71 0 phone.) Initial Battery Charging The rechargeable Nickel-Cadmium battery pack must be fully charged before using your phone for 1. Plug the Charging the first time. We recommend that the battery pack Cradle AC Adapter charge for approximately 15-20 hours, without cord into the DC input interruption, before plugging the phone line into your jack on the Charging new phone. 1. Place the Handset or the Base Unit. Either
Resumen del contenido incluido en la página 12
Continuous Battery Charging Setting the Pulse/Tone Switch* For the best battery performance, return the Handset to the Base Unit at the end of the day. This keeps Be sure the PULSE/TONE switch is in the TONE the battery fully charged, so your phone works best. position. Low Battery Indicator When the Battery Pack in the Handset is very low and needs to be charged, the TALK/BATT LOW LED flashes. Note: Most phone systems are Tone dialing. Check with your local phone company if you are not sure whe
Resumen del contenido incluido en la página 13
You can also select one of Automatic Digital Code Security two different ringer tones To avoid unauthorised calls on your phone, a Digital for the Handset. Code was added to all XC610 Series/XC710 Cordless Telephone. This Digital Code is shared only Press @ to select a between the Handset and Base Unit. The Code is different ringer tone when set automatically when you first use the phone. the phone is not in use. To change the Diaital Code, be sure the Handset is on the Base, then: 1. Remove the
Resumen del contenido incluido en la página 14
4. When the beeping stops, briefly remove Using Your Phone the Handset again, and then return it to Making and Receiving Calls the Base Unit. The following features of the XC610 Series/XC710 Mote: The CHARGE phone is different depending on the Handset’s LED will blink to location when you make or receive a call. indicate that the Digital Security Code is set to HANDSET ON HANDSET OFF one of the more than BASE BASE 65,000 codes. I ANSWER Pick up Handset Press @ CALL (AutoTalk) I If the Base Unit
Resumen del contenido incluido en la página 15
Changing Channels, Flash, and Page/Find Programming Your Phone To change channels or access call waiting while the phone is in use, or to use the one-way page to locate All programming functions must be completed when the Handset. follow these steps: your phone is in the standby mode because programming keys do not function while you are on the phone. PRESS THESE YOU WILL HEAR KEYS Storing a Number in Memory Press @ A click similar to Note: Change when @ is Use these keys to store a fa/k channel
Resumen del contenido incluido en la página 16
4. If a pause is needed @@ Storing a Mixed Number during dialing to access a long (Australian Model Only) @@@@@@a distance service press e. If your phone is set up for Pulse dialing, you can store a mixed mode number so that you can easily Note: The @ button counts as one digit. Pressing access long distance services. @ more than once increases the length of the pause between numbers. Use these keys to store a mixed mode number in 5. Press @3 again. memory. 6. Enter the memory Note: An error ton
Resumen del contenido incluido en la página 17
4. Press B on the Dialing a Stored Number Handset. To dial a number previously stored in memory, follow these steps: Remove the Handset 1. from the Base Unit. 5. Enter the number to ;oifled in tone 6. If a pause is needed 2. Press a. during dialing to access a long distance service, press @. Nofe: The @ button counts as one digit. Pressing @ more than once increases the length of the pause between numbers. 7. Press @ again. Enter the memory 8. location (0-9). A tone indicates that the number is
Resumen del contenido incluido en la página 18
4. Press the memory Press @ twice. 2. location number (0-9). Chain Dialing 3. Press the memory location number (0-9). On certain occasions, after dialing a number, you may be requested by the party or service you are calling to enter a special access code, such as when performing a banking transaction. To do this, simply: 1. ;;;b;;~ access code into one of the memory 2. Dial the main number. 3. At the appropriate time, press @ followed by the memory location number where the access code is saved
Resumen del contenido incluido en la página 19
Problem Suggestion Troubleshooting Handset doesn’t ring or l Nickel-Cadmium If your XC610 Series/XC710 Cordless Telephone is receive a page. battery pack may be not performing to your expectations, please try these weak. Charge the simple steps. If you are still unable to resolve the battery on the Base problems, contact Uniden Customer Service for Unit for 15-20 hours. assistance. l Extend the Base Unit Problem Suggestion antenna vertically. Chanrge light won’t come l Make sure AC l The Handset
Resumen del contenido incluido en la página 20
Specifications WARRANTY General UNIDEN XC610 Series/XC710 1 YEAR WARRANTY (Batteries and Accessories are covered for 90 Days ONLY) PLL Frequency Note: Please keep your sales docket as it provides evidence of warranty. Control Warranty is only valid in the country where the product has been purchased. Modulation FM WARRANTOR: Uniden Australia Pty. Limited ACN 001 865 498 Uniden New Zealand Limited Operating - 10˚C to 50˚C Temperature ELEMENTS OF WARRANTY: Uniden warrants to the original retail ow
