Resumen del contenido incluido en la página 1
uni ~n@
XC 31 0
1
,0.00'00'0
1
Cordless Telephone
I
Operating Guide
For Australia and New Zealand
.......
Resumen del contenido incluido en la página 2
Table of Contents ImportantSafetyInstructions 3 Aboutyour XC 310 """"""""""" ... 5 Unpacking 5 XC 310 Features. ... .......... .... """ ............................................6 Automatic Digital Code Security. 6 Base Unit Controls & Functions 7 Handset Controls & Functions 9 Read This Before Installation 11 InstallingYour XC 310 , 11 Connecting the Telephone Line 11 Installing the Telephone on a Desk or Tabletop 12 Mounting the Telephone on a Wall 12 Connecting the AC Power 13 Installing th
Resumen del contenido incluido en la página 3
PRECAUTIONS Beforeyou read anythingelse, please observe the following: WARNING! Uniden Corporation DOES NOT represent this unit to be waterproof. To reduce the risk of fire, electrical shock, or damage to the unit, DO NOT expose this unit to rain or moisture. NICKEL-CADMIUM BATTERY WARNING . This equipment contains a Nickel-Cadmium Battery. . The Nickel-Cadmium Battery contained in this equipment may explode if disposed of in a fire. . Do not short circuit the battery. . Do not charge the Nickel
Resumen del contenido incluido en la página 4
Important Safety Instructions When using your telephone equipment, basic safety precautions should always be followed to reduce the risk of fire, electrical shock, and injury to persons, including the following: 1. Read and understand all instructions. 2. Follow all warnings and instructions marked on the product. 3. Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a dry cloth for cleaning. 4. Do not use this product near water; for ex
Resumen del contenido incluido en la página 5
12.Unplug this product from the wall outlet and refer servicing to qualified service personnel under the following conditions: A. If the power supply cord is damaged or frayed. B. If liquid has been spilled into the product. C. If the product has been exposed to rain or water. D. If the product does not operate normally when following the operating instructions. Adjust only those controls that are covered by the operating instructions. Improper adjustment of other controls may result in damage,
Resumen del contenido incluido en la página 6
About Your XC 310 Congratulations on your purchase of the Uniden XC 310 Cordless Telephone. The XC 310 is designed and engineered to exacting standards for reliability, long life, and outstanding performance. To get the most from your XC 310, please read this Operating Guide thoroughly. Unpacking YourXC310boxshouldcontainthefollowingitems: . Base Unit . Handset . Telephone Line Cord with Modular Plug . AC Adaptor . Rechargeable Battery Pack . This Operating Guide (read thoroughly) . Memory Stora
Resumen del contenido incluido en la página 7
XC 310 Features . UltraClear Plus noise reduction provides the quality sound of a corded telephone. . Eight 30/39 MHz Channels (Australia): Three 30/39 MHz Channels (New Zealand) . 20-Number Memory . Maximum Operating Range . Redial/Pause and Flash . AutoStandby . AutoTalk . Tone/Pulse Dialing (available on Australian Models only) . Automatic Digital Code Security . Handset Volume Control/Ringer Volume Control . One-Way Page, Base Unit to Handset . Battery Saving Feature . 2-WayHandsetMounting .
Resumen del contenido incluido en la página 8
Base Unit Controls & Functions TELLINE "Ii 7
Resumen del contenido incluido en la página 9
TONE/PULSE Use this switch to select either Tone Dialing or Pulse Switch Dialing. (Available on Australian Models only) DC Input Jack Plug the AC Adapter cord into this jack. Then plug the AC Adapter into a standard wall outlet. TEL LINE Jack Plug the supplied telephone line cord into this jack and the other end of the cord into the standard modular telephone socket. Handset Retainer Reverse this retainer to hang up the Handset when the XC 310 is mounted on a wall. Base Unit Collapsible antenna
Resumen del contenido incluido en la página 10
Handset Controls & Functions Handset Antenna TAlKlBATTlOW CHANNEL -- ~ LED Button Button . TALK Button 6~t . RINGON QZ N!C DB' BATTSAVE I~ G)@@ Switch aH JICI.. t.INO @@@ 1-9,0, TONE*, PAIl l\N ~ # Button (?)@@ @)@@) A..A8H VCJU.I\IE II.e.! A. TONE A.VCL FI1.JP RDUP . . --- G:m MEMButton Button FLASHIR. TONE VOlUMEIR.VOl Button Button 9
Resumen del contenido incluido en la página 11
Handset Antenna Flexible antenna. TALK/BA TT This LED has a dual function: (a) When the phone is in LOW LED use, the red LED lights steady. (b) When the battery pack is Iow and need to be recharged, the LED flashes every 3 seconds. CHANNEL Button Press to select one of the available channels for clearest operation. (Note: Operates only when the phone is in use.) TALK Button Press to place or answer a call. When finished, press to hang up. Numeric Keys Used for dialing numbers and storing numbers
Resumen del contenido incluido en la página 12
Read This Before Installation We have designed your telephone to conform to Australia or New Zealand Radio Frequency regulations, and you can connect it to most telephone lines. However, each device that you connect draws power from the phone line. We refer to the power drawn as the devices ringer equivalence number or REN. The REN is shown on the bottom of your telephone (New Zealand Models only). If you are using more than one phone or other device on the line, add up all the REN's. If the tot
Resumen del contenido incluido en la página 13
Installing the Telephone on a Desk or Tabletop Place the Base Unit on a desk or tabletop, and plug one end of the Telephone Line Cord (supplied) into the "TELLINE" jack on the Base. Plug the other end of the cord into the telephone socket. The unique design of your XC 310 allows you to place the Handset on the Base Unit either facedown or in an upright position. The battery pack in the Handset automatically recharges in either position. Mounting the Telephone on a Wall Setting the Handset Retain
Resumen del contenido incluido en la página 14
If you are mounting the XC 310 on an existing standard wall plate: 1. Plug one end of the Telephone Line Cord (supplied) into the "TELLINE" jack on the top of the Base Unit. Lay the cord inside the molding on the bottom of the Base Unit. Then plug the other end of the cord into the telephone wall socket. 2. Mount the Base Unit onto the wall plate. Then hang the Handset on the cradle. If you are mounting the XC 310 elsewhere: 1. Carefully select a location away from electrical cables, pipes, or o
Resumen del contenido incluido en la página 15
1. Remove the battery compartment cover on the Handset by sliding it down. ... 2. Connect the Nickel-Cadmium Battery Pack by plugging it into the socket at the top of the battery compartment. Note: The connector fits only one way and requires only a minimal amount of pressure to insert. Always install the Battery Cable with the BLACK wire to the left. 3. Place the Battery Pack inside the = compartment and slide the battery cover back on. Make sure not to get the wires t from the Battery Pack cau
Resumen del contenido incluido en la página 16
Low Battery Indicator When the Battery Pack in the Handset is very Iow and needs to be charged, the TALK/BAITlOW LED flashes every 3 seconds. If this occurs while you are on the phone, a short alert beep will also sound. When this happens, complete your call as quickly as possible, and return the Handset to the Base Unit for charging. Allow 12 to 16 hours for Handset to recharge. When the battery is Iow, only the TALKbutton will function. Using Your XC 310 Selecting Pulse or Tone Dialing (availa
Resumen del contenido incluido en la página 17
Placing a Call To place a call with your XC 310: 1. Remove the Handset from the Base Unit and press TALK. 2. Dial the number you are calling. 3. When you have finished the call, press TALKor return the Handset to the Base Unit. NOTE: If you don't place the Handset back on the Base Unit, you will need to press TALKto hang up the phone. Selecting a Channel TheCHANNEL button on the Handset allows you to choose among factory set channels. If you are receiving static or other interference on a channe
Resumen del contenido incluido en la página 18
Using the AutoStandby Feature When you finish a call and place the Handset back on the Base Unit, AutoStandbyautomatically hangs up the phone. There is no need to press TALK to hang up. NOTE: If you don't place the Handset back on the Base Unit, you need to press TALKto hang up the phone. NOTE: Sometimes whenyou press TALKto hang up the phone, you may get an error tone and the phone will not disconnect. This may occur during conversations under noisy conditions. If this happens, place the Handse
Resumen del contenido incluido en la página 19
2. Enter the number to be dialed in Pulse Mode. 3. Press the If button on the Handset. (Note:The If button counts as one digit.) 4. Enter the number to be dialed in Tone Mode. 5. If you wish to enter a delay between numbers (for accessing a switchboard, or long distance service), press RDLJP at the point in the number sequence you wish to pause. (Note: The RDLJP button counts as one digit.) Pressing RDLJP more than once will increase the length of the pause between numbers. 6. Press MEMand a num
Resumen del contenido incluido en la página 20
Using the Page Feature The Page feature sends a signal from the Base Unit to the Handset causin~ it to beep. This is useful for locating the Handset when it is away from the Base Unit. Press the PAGEbutton on the Base Unit and listen for the tone from the Handset. NOTE: The Page feature does not work when the phone is in use or when the Handset RING ON/BA TTSAVEswitch is in the "BATT SAVE" position. 19
