Resumen del contenido incluido en la página 1
UIP200 User's Manual
Revision 1.0
© Uniden America Corp., May, 2004
This manual contains instructions for installing and operating your UIP200 SIP IP phone. It
provides a description of the telephones hardware, features, LCD displays, and explains setup,
configuration, and basic operation. If you have any questions about the information in this
document, please call our Customer Service Department at 1-800-648-4921 or visit us on the
web at http://bcs.uniden.com.
Resumen del contenido incluido en la página 2
UIP200 User's Manual Page 2 of 27 Table of Contents Introduction ......................................................................................................... 5 Document Conventions....................................................................................................... 5 Warnings, Cautions, Notes, and Timesavers...................................................................5 Regulatory Information...........................................................
Resumen del contenido incluido en la página 3
UIP200 User's Manual Page 3 of 27 Making Calls..................................................................................................................... 16 Using the Handset .........................................................................................................16 Using the Speakerphone or a Headset (Hands-free) .....................................................16 Using On-Hook Dialing .......................................................................
Resumen del contenido incluido en la página 4
UIP200 User's Manual Page 4 of 27 Figures in This Document Figure 1 Attaching the Wall Mount Bracket...........................................................................14 Figure 2 Mount the Phone on the Wall Plate..........................................................................14 Figure 3 LCD in standby mode...............................................................................................16 Figure 4 LCD when a Call is Connected .......................
Resumen del contenido incluido en la página 5
UIP200 User's Manual Page 5 of 27 Introduction Document Conventions Warnings, Cautions, Notes, and Timesavers This document uses particular conventions for warnings, cautions, notes and timesavers. Below is an example of these conventions and how they are used: WARNING Warnings appear with the stop sign. They indicate there is extreme danger or a risk of injury if the instructions are not followed correctly. Some warnings are required by government regulation or company policy.
Resumen del contenido incluido en la página 6
UIP200 User's Manual Page 6 of 27 Regulatory Information FCC Part 15 This product complies with the limits for a Class B computing device pursuant to Sub part B of Part 15 of FCC Rules. U.L. Compliance This equipment complies with Underwriters Laboratories Standard U.L. 60950. Industry Canada (ICES-003) This class B digital apparatus complies with Canadian ICES-003. Users should not attempt to make such connections themselves, but should contact the appropriate electric inspection
Resumen del contenido incluido en la página 7
UIP200 User's Manual Page 7 of 27 Important Safety Considerations When using this product, basic safety precautions should always be followed to reduce the risk of fire, electrical shock and injury to persons, including but not limited to the following: # Read and understand all instructions. # Follow all warnings and instructions marked on the product. # Unplug this product from the wall outlet and network connection before cleaning. Do not use liquid cleaners or aerosol cleaners.
Resumen del contenido incluido en la página 8
UIP200 User's Manual Page 8 of 27 instructions. Improper adjustment of other controls can result in damage, and will often require extensive repair work by a qualified technician.) 5. If the product has been dropped, or the cabinet has been damaged. 6. If the product exhibits a distinct change in performance. # Uniden works to reduce lead content in our PVC coated cords in our products and accessories. WARNING The cords on this product and/or accessories contain lead, a chemic
Resumen del contenido incluido en la página 9
UIP200 User's Manual Page 9 of 27 encouraged to try to correct the interference by one or more of the following measures: # Reorient or relocate the receiving antenna. # Increase the separation between the equipment and the receiver. # Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. # Consult the dealer or an experienced radio/TV technician for help. AC Adapter The UIP200 is intended to be supplied by IPAD-532 a UL Listed di
Resumen del contenido incluido en la página 10
UIP200 User's Manual Page 10 of 27 Product Description Features # 11 LED indicators (8 programmable keys, Headset/speaker, Hold, and Receive Signaling Lamp) # 12-key dial pad # 16 specific keys (Eight programmable keys, Menu, Cancel, Dial, Transfer, Headset/speaker, Hold, Volume Up/Down) # Volume control for speaker, handset, headset and ringer # 4 One-Touch speed dial numbers # 10 Two-touch speed dial numbers # Automatic Ringdown (Hotline feature) # Call Waiting # Call Transf
Resumen del contenido incluido en la página 11
UIP200 User's Manual Page 11 of 27 # Quality of Service (IEEE 802.1 p/q based and DiffServ) # Jitter compensation # 10/100 Base-T Ethernet Interface # Additional 10/100 Base-T Ethernet Switch port for connecting a PC. Operational Features # Terminal configuration # Firmware update via TFTP # Auto Configuration update using TFTP # Remote Reboot using NOTIFY event message # Password protection for configuration update Control and Functions To make phone operations easier and to av
Resumen del contenido incluido en la página 12
UIP200 User's Manual Page 12 of 27 Function Keys There are eight user programmable function keys in the UIP200. Each can be programmed to one of several functions, for example, 1-Touch Speed Dialing, Voice Message Access, Do Not Disturb, Mute, or 2-Touch Speed Dialing. LED Status There are eleven LEDs on the UIP200 IP phone. Two LEDs are also the fixed- function keys HOLD and HEADSET/SPEAKER. These fixed-function keys illuminate to show the status of the function while it is used.
Resumen del contenido incluido en la página 13
UIP200 User's Manual Page 13 of 27 Physical Interface # PC connection 10/100 Base-T (RJ-45) # LAN connection 10/100 Base-T (RJ-45) # Handset connection (RJ-22) x 1 # Headset (Phone Jack φ2.5mm) X 1 # DC Jack (EIAJ Class2, Center +) X 1 Power Supply # Input to the phone from the power supply: 5 Vdc, 1.7 A (IPAD-532) # Input to the phone from Power Over Ethernet: nominal -48 Vdc (-36 to -57) Speaker # 8 Ω 8W φ57mm Rev. 1.0, © UAC, May, 2004
Resumen del contenido incluido en la página 14
UIP200 User's Manual Page 14 of 27 Installation and Basic Setup Instructions Wall-Mounting the Telephone The wall mount bracket is included with the UIP200. The wall mount bracket can be attached to the bottom of the UIP200, allowing the user to wall mount the telephone. The bracket can only be attached one way. Once the bracket is attached, the phone may be mounted over an existing wall plate. Figure 1 Attaching the Wall Mount Bracket Attach the wall mount bracket to the rear of
Resumen del contenido incluido en la página 15
UIP200 User's Manual Page 15 of 27 Connecting the Telephone Before using the UIP200, you must connect the handset to the phone, connect the phone to the LAN network, and connect the phone to power. CAUTION If using Power over Ethernet, do not connect the AC power supply. Step 1: Connect the handset to the handset port (RJ-22) located on the left side of the phone as viewed from the front of the phone. Step 2: Connect the Ethernet cable from the network to the port labeled LAN on
Resumen del contenido incluido en la página 16
UIP200 User's Manual Page 16 of 27 Basic Telephone Operations Standby Standby mode is the state in which the UIP200 is on-hook, ready to make or receive calls. While the UIP200 is in standby mode, all LEDs are turned off and the current date, time and phone number are shown on the LCD (see Figure 3). 01/01/70 9:00AM 5555551234 Figure 3 LCD in standby mode Making Calls You can make calls using the handset or using the speakerphone or headset. Using the Handset Step 1: Pick up
Resumen del contenido incluido en la página 17
UIP200 User's Manual Page 17 of 27 Step 2: Enter the destination telephone number. Step 3: Press the DIAL key to initiate the connection immediately. If you wait approximately four seconds after you enter the last digit enter, the phone will automatically connect. Using On-Hook Dialing You can also enter telephone numbers before picking up the handset or activating the speakerphone (while the telephone is in standby mode). Step 1: Enter the destination number. Step 2: Pick up the
Resumen del contenido incluido en la página 18
UIP200 User's Manual Page 18 of 27 Step 3: When you reach the volume level you want, wait for 2.5 seconds. Step 4: The new volume setting is saved. Changing the Headset Volume Step 1: Plug in the headset. Step 2: Press the HEADSET/SPEAKER key. Step 3: Press ▲ (UP) or ▼ (DOWN) to adjust the volume. Step 4: When you reach the volume level you want, wait for 2.5 seconds. Step 5: The new volume setting is saved Changing the Speakerphone Volume Step 1: If a headset is plugged int
Resumen del contenido incluido en la página 19
UIP200 User's Manual Page 19 of 27 Transferring a Call The steps below represent the most common method of transferring a call. Please note that the transfer operation may work differently with different systems. Step 1: During a call, press the XFR/FLASH key. This puts the current call on hold, and you will hear a dial tone. Step 2: Dial the number you wish to transfer the call to; you can transfer a call to any number, even one outside of your network. Step 3: If you do not want
Resumen del contenido incluido en la página 20
UIP200 User's Manual Page 20 of 27 Feature Operations Programmable and Fixed Function Keys There are eight programmable function keys and eight fixed functions keys in the UIP200. Programmable function keys can be assigned to any one of the available functions: One-touch speed dial, Two-touch speed dial, DND, Voice Message Access (VMA) or Mute. The programmable keys also act as LEDs to indicate the status of the assigned function. Table 4 Fixed-Function Key and Programmable Key Defa
