Resumen del contenido incluido en la página 1
Resumen del contenido incluido en la página 2
Resumen del contenido incluido en la página 3
www.uniden.com
Resumen del contenido incluido en la página 4
Contents WELCOME/FEATURES 3 Editing or Erasing a Stored Name, Phone Number Distinctive Ring, and Speed Dial 32 QUICK REFERENCE GUIDE 5 RocketDial (One Touch Dialing) 33 CONTROLS AND FUNCTIONS 6 Chain Dialing 34 GETTING STARTED 8 Memory Dialing (base only) 34 Read this First 8 CALLER ID 35 Checking the Package Contents 9 Viewing the Caller ID List 36 Setting up the Phone 10 Deleting Information from the Caller ID List 37 Terminology 14 Using the Caller ID Message List 38 Setting Caller ID Option
Resumen del contenido incluido en la página 5
Congratulations on your purchase of the Uniden cordless telephone. This phone is designed Welcome and engineered to exacting standards for reliability, long life and outstanding performance. To enjoy the best performance from this phone’s features, please read this manual carefully and save it for future reference. Note: Some illustrations in this manual may differ from the actual unit for explanation purposes. As an Energy Star® Partner, Uniden has determined that this product or product models
Resumen del contenido incluido en la página 6
The TRU5885 series features include AutoTalk™ and AutoStandby™. AutoTalk allows you to answer a call by just removing the handset from the base so you don’t have to waste time pushing buttons. AutoStandby allows you to hang up by simply returning the handset to the base. To protect you against mis-billed calls, which might result from your phone being activated by other equipment, the TRU5885 series has Random Code™ digital security, which automatically selects one of over 65,000 digital securit
Resumen del contenido incluido en la página 7
UICK EFERENCE UIDE Q R G Step 1 Charging the Battery Step 2 Connecting Step 4 Setting up Answering System INSTALL THE HANDSET BATTERY CONNECT TO A PHONE LINE TO SELECT CALLER ID OPTIONS When the handset battery pack is fully Remove the cover. Press menu/mute. charged, plug the telephone cord into the base unit and then into a telephone Press + or - to move the pointer to wall jack. “Caller ID Setup”, then press select/ch. Connect the battery + - Press or to move the pointer to pack connector w
Resumen del contenido incluido en la página 8
Controls and Functions 1. Handset Antenna 2. Headset Jack Cover 3. Beltclip Hole 4. Handset Battery Compartment 5. New Message LED 5 1 6. Handset Earpiece 7. LCD Display 2 6 8. call id (Caller ID)/ (right cursor) Key 3 9. (Phonebook)/RocketDial/ (left cursor) Key 10. spkr (speaker) Key 7 17 11. (repeat)/1 Key 26 8 18 12. (delete) (for remote operation)/4 Key 9 19 13. /tone Key 10 20 14. redial/p (pause) Key 11 21 15. Menu/ (mute) Key 12 4 16. Handset Microphone 13 22 17. Talk/flash Key 14 23 1
Resumen del contenido incluido en la página 9
28 29 30 41 31 42 32 43 27 33 44 34 45 46 35 47 48 36 49 50 27. Base Antenna 28. Base Speaker 51 29. Status LED 37 38 39 40 52 53 30. Message Counter Display 42. (skip) Key (TRU5885-2 only) 31. (repeat) Key 43. (delete) Key 32. Answer on/off Key 44. Memo rec Key 56 33. Greeting Key 45. Mute Key 34. Redial/p (pause) Key 46. Set/ringer Key 54 35. Menu Key 47. (up) Key ^ 36. Base Charging Contacts 48. v (down) Key 55 37. Memory Key 49. (talk) Key/Speaker LED 38. Flash Key 50. # Key 54. Charging Con
Resumen del contenido incluido en la página 10
Read this First This cordless telephone must be set up before use. Follow these steps: Step 1 (page 9) Unpack the telephone and accessories. Step 2 (page 10) Next, choose the best location to set up the base unit. Step 3 (page 11 to 14) Then, insert the battery pack into the handset. Connect the base unit. You must charge the battery pack for 15-20 hours before plugging into the phone line and using the phone. About the digital security code Step 4 (page 15 to 17) This cordless telephone uses a
Resumen del contenido incluido en la página 11
GETTING STARTED Checking the Package Contents Make sure you have received the following items in the package. If any of these items are missing or damaged, contact the Uniden Parts Department. • Base unit (1) • Handset [TRU5885 (1) / TRU5885-2 (2)*] • AC adapter [TRU5885 (1) / TRU5885-2 (2)] • Rechargeable battery [TRU5885 (1) / TRU5885-2 (2)] • Telephone cord (1) • Beltclip [TRU5885 (1) / TRU5885-2 (2)] • Charger (1) [TRU5885-2 only] Also included: • This Owner’s Manual • Other Printed Material
Resumen del contenido incluido en la página 12
Setting up the Phone Do the following steps: A. Choose the best location C. Connect the base unit B. Install the battery pack D. Choose the dialing mode A. Choose the best location Before choosing a location for your new phone, read “Installation Considerations” on page 64. Here are some important guidelines you should consider: Avoid heat sources, such as Avoid noise sources such as a window radiators, air ducts, and sunlight by a street with heavy traffic Avoid microwave ovens Avoid television
Resumen del contenido incluido en la página 13
GETTING STARTED B. Install the battery pack Charge the battery pack for at least 15-20 hours before plugging the phone line into your base unit. 1) Press down on the battery cover release and slide the • Use only the Uniden cover down until it comes off. battery (BT-446) supplied with your phone. Replacement batteries are also 2) Connect the battery pack connector observing the correct available through polarity (black and red wires) to the jack inside the the Uniden Parts battery compartment.
Resumen del contenido incluido en la página 14
Battery use time (per charge) Fully charged • 4 hours continuous use • 8 days when the handset is in the standby mode When you charge the handset, Caller ID summary screen and the name of the handset, HS1 appears. For TRU5885-2, if HS2 appears, you are charging the handset No. 2. Low battery alert When the battery pack is very low and needs to be charged, the phone is programmed to eliminate functions in order to save power. If the phone is in the standby mode, ”Low Battery” appears on the LCD a
Resumen del contenido incluido en la página 15
GETTING STARTED C. Connect the base unit 1) Connect the AC adapter to the DC IN 9V jack and to a standard 120V AC wall outlet. “ ” appears on the base, and it will change to “ ” after a few seconds. “ ” indicates that there are no messages in your answering system. 2) Set the base and charger (for TRU5885-2 only) on a desk or tabletop, and place the handset in the base unit as shown. 3) Make sure the status LED illuminates. If the LED does not illuminate, check to see that the AC adapter is plu
Resumen del contenido incluido en la página 16
D. Choose the dialing mode Most phone systems use tone dialing, which sends DTMF tones through the phone lines. However some phone systems still use pulse dialing such as in rural areas. The default setting is tone dialing. Depending on your dialing system, set the mode as follows: • If you are not sure of 1) When the phone is in the standby mode, press menu/mute. your dialing system, set the unit to tone dialing. Make a trial call. If the call connects, leave the setting as is, otherwise 2) Pre
Resumen del contenido incluido en la página 17
GETTING STARTED Setting Caller ID Options There are three Caller ID setup options available: AutoTalk, CIDCW (Caller ID on Call Waiting), and Area Code. See page 16 for Area Code setup instructions. AutoTalk allows you to answer the phone without pressing talk/flash or spkr. If the phone rings when AutoTalk is On, simply remove the handset from the base and the phone automatically answers the call. Or if the handset is not in the base, press any number key, /tone, or # to answer the call. If you
Resumen del contenido incluido en la página 18
Entering Your Area Code If you enter a 3-digit area code number in the “Area Code” option, your local area code does not appear in Caller ID messages. For calls received from outside your local area code, you will see a full 10-digit number. • If your calling area 1) When the phone is in the standby mode, press menu/mute. requires 10-digit dialing, do not program this option. • When the area code has 2) Press + or - to move the pointer to “Caller ID Setup”, already been stored in then press sel
Resumen del contenido incluido en la página 19
GETTING STARTED Selecting a Language Language option can be used to choose the language of your display. You can select English, French, or Spanish. 1) When the phone is in the standby mode, press menu/mute. 2) Press + or - to move the pointer to “Language“, then press select/ch. 3) Press + or - to choose English, French (Français), or Spanish (Español). 4) Press select/ch, and you will hear a confirmation tone. 5) Press end to exit. GETTING STARTED [ 17 ]
Resumen del contenido incluido en la página 20
Making and Receiving Calls On the handset, you may also use the speakerphone while talking on your phone. Using the handset speakerphone is called “hands-free conversation”. This feature allows you to easily communicate while performing other tasks, such as cooking. appears during • Refer to page 15 “Setting Caller ID hands-free conversation. Options” to turn the You can easily switch a call from normal conversation to “hands-free conversation”. AutoTalk feature On if To switch a call, press sp
