Resumen del contenido incluido en la página 1
EXA3245.Qx 1/27/3 9:59 AM Page 1
Resumen del contenido incluido en la página 2
EXA3245.Qx 1/27/3 9:59 AM Page 2
Resumen del contenido incluido en la página 3
EXA3245.Qx 1/27/3 9:59 AM Page 1 Step 1 Checking the Package Contents Step 2 Install and Charge the Handset Battery Step 3 Connect to Phone Line Step 4 Set Answering System Make sure you have received the following When the handset battery pack is fully To turn the Digital Answerer charge/in use items in the package. If any of these charged, after 15-20 hours of charging, answering system items are missing or damaged, contact plug the telephone cord into the base A Remove the cover. on, pr
Resumen del contenido incluido en la página 4
EXA3245.Qx 1/27/3 9:59 AM Page 2 Contents Quick Reference Guide 1 RocketDial RocketDial 20 Welcome/Features 3 Storing the RocketDial 20 Controls and Functions 4 Making Calls with the RocketDial 20 Getting Started Deleting the RocketDial 20 Setting up the Phone 6 The Integrated Answering Device Mounting the Base Unit on a Wall 12 The Integrated Answering Device 21 Basics Features 21 Making and Receiving Calls 14 Turning the Answering System On/Off 22 Adjusting the Handset Ringer and Setting Up
Resumen del contenido incluido en la página 5
EXA3245.Qx 1/27/3 9:59 AM Page 3 Congratulations on your purchase of the Uniden EXA3245 cordless telephone and Welcome answering system. This phone is designed and engineered to exacting standards for reliability, long life, and outstanding performance. Note: Some illustrations in this manual may differ from the actual unit for explanation purpose. The color of your cordless phone may vary. As an ENERGY STAR® Partner, Uniden has determined that this product or product models meets the ENERGY
Resumen del contenido incluido en la página 6
EXA3245.Qx 1/27/3 9:59 AM Page 4 Controls and Functions 1. Handset antenna 2. Handset battery compartment 3. Handset earpiece 1 4. Talk/batt low LED 5. Flash key 6. Talk key 7. /tone key 3 * 8. Redial/p (pause) key 9. Handset microphone 10. (Memory) mem key 4 10 11. RocketDial key 5 11 12. End key 6 12 13. (Volume) vol/ring key 13 14. Channel key 15. Handset charging contacts 2 7 14 8 9 15 [ 4 ] www.uniden.com
Resumen del contenido incluido en la página 7
EXA3245.Qx 1/27/3 9:59 AM Page 5 16 17 16. Telephone line jack 17. DC IN 9V jack 18. Handset retainer clip 19. Charge/in use LED 20.(Play/stop) key 21.(Repeat/rewind) key 22. Answer on/off/ key 23. Memo rec (record) key 24. Find hs (handset) key 25. Clock/menu key 27 26. Base charging contacts 27. Base speaker 18 28. Base antenna 28 29. (Skip/fast forward) key Digital Answerer 19 charge/in use 30. Delete/ key 20 31. Greeting key 29 21 32. Ringer key answer on/off delete 22 30 33. Set key 31 23
Resumen del contenido incluido en la página 8
EXA3245.Qx 1/27/3 10:00 AM Page 6 Setting up the Phone Do the following steps: A. Choose the best location C. Connect the base unit B. Install the rechargeable battery pack D. Choose the dialing mode If your home has into the handset specially wired alarm A. Choose the best location equipment connected to the telephone line, be Before choosing a location for your new phone, read the INSTALLATION sure that installing the CONSIDERATIONS included in the PRECAUTIONS AND IMPORTANT SAFETY system
Resumen del contenido incluido en la página 9
EXA3245.Qx 1/27/3 10:00 AM Page 7 B. Install the rechargeable battery pack into the handset The handset is powered by a rechargeable battery pack. The battery recharges automatically when the handset is placed in the base unit. Charge the handset battery pack for at least 15-20 Use only the Uniden hours before using your new cordless telephone for the (BT-905) rechargeable first time! To maximize the charge capacity of your battery battery pack supplied pack, DO NOT plug the telephone cord in
Resumen del contenido incluido en la página 10
EXA3245.Qx 1/27/3 10:00 AM Page 8 4) Place the battery case cover back on the handset by sliding it upwards until it clicks into place. 5) Place the handset in the base unit for 15-20 hours without interruption. The base unit’s LED light (labeled charge/in use) illuminates once the handset is placed in the base. The LED light will illuminate regardless if the battery pack is connected or not. DO NOT rely on the LED light as an indicator that the battery pack is connected and the handset is cha
Resumen del contenido incluido en la página 11
EXA3245.Qx 1/27/3 10:00 AM Page 9 Battery use time (per charge) From fully charged (15-20 hours charge time) • Up to seven hours continuous use during the talk mode. • Up to fourteen days when the handset is in the standby mode. • Even when the battery Low battery alert pack is not being When the battery pack is very low and needs to be charged, the phone is programmed used, it will gradually to eliminate functions in order to save power. If the phone is not in use, the discharge over a long t
Resumen del contenido incluido en la página 12
EXA3245.Qx 1/27/3 10:00 AM Page 10 C. Connect the base unit 1) Connect the AC adapter to the DC IN 9V jack and to a standard 120V AC wall outlet. 2) Set the base on a desk or tabletop, and place the • Use only the supplied handset on the base unit as shown. (For wall AD-314 AC adapter. Do not use any other mounting, see "Mounting the Base Unit on a Wall", AC adapter. on page 12.) • Place the power cord 3) Raise the antenna to a vertical position. so that it does not create a trip hazard or w
Resumen del contenido incluido en la página 13
EXA3245.Qx 1/27/3 10:00 AM Page 11 5) Once the handset battery pack is fully charged, connect the telephone line cord to the TEL LINE jack and a telephone outlet once the handset is fully charged. If your telephone outlet isn't modular, contact your telephone company for assistance. Modular • Make sure your battery D. Choose the dialing mode pack is fully charged Most phone systems use tone dialing which sends DTMF tones through the phone before choosing the lines. However some phone systems s
Resumen del contenido incluido en la página 14
EXA3245.Qx 1/27/3 10:00 AM Page 12 Mounting the Base Unit on a Wall Setting the handset retainer clip for wall mounting Flip the hook tab over so the tab holds the handset. 1) On the base unit, pull the handset retainer clip out of the slot and rotate it clockwise 180 degrees. 2) Flip the retainer clip from front to back. Slide it back into the slot so that the lip of the retainer is up and the is down. The retainer holds the handset in place. DO NOT use an AC Standard wall plate mounting
Resumen del contenido incluido en la página 15
EXA3245.Qx 1/27/3 10:00 AM Page 13 Direct wall mounting If you don't have a standard wall plate, you can mount your phone directly to the wall. Before doing this, consider the following: • Avoid electrical cables, pipes, or other items behind the mounting location that could cause a hazard when inserting screws into the wall. • Try to mount your phone within 5 feet of a working phone jack to avoid excessive cord lengths. • Make sure the wall material is capable of supporting the weight of the
Resumen del contenido incluido en la página 16
EXA3245.Qx 1/27/3 10:00 AM Page 14 Making and Receiving Calls Handset On Base Handset Off Base To receive Pick up the handset (AutoTalk). Press the talk, any number, /ton e or # key. a call * 1) Pick up the handset. 1) Press the talk key. The 2) Press the talk key. talk/batt low LED flashes To make The talk/batt low LED flashes and turns on. a call and turns on. 2) Listen for the dial tone. 3) Listen for the dial tone. 3) Dial the number. 4) Dial the number. To hang up Press the end key or re
Resumen del contenido incluido en la página 17
EXA3245.Qx 1/27/3 10:00 AM Page 15 Adjusting the Handset Ringer and Earpiece Volume Handset ringer tone When the phone is in standby mode, pressing the vol/ring key on the handset selects the handset ringer tone. There are two ringer tones. Continue pressing the vol/ring key to listen to all tones. The phone keeps the last ringer tone setting selected. Earpiece volume The handset earpiece volume settings (Low, Medium and High) can only be adjusted during a call. Press the vol/ring key repeated
Resumen del contenido incluido en la página 18
EXA3245.Qx 1/27/3 10:00 AM Page 16 Tone Dialing Switch-over Some telephone companies use equipment that requires pulse dialing (sometimes referred to as rotary dialing). If you need to enter tone dialing digits, you can switch-over to tone dialing during the call. For example, entering your bank account number • The tone feature only after you have called your bank. applies when the dial mode is set to pulse. Initially make your call with the pulse dialing mode. Once your • This special numbe
Resumen del contenido incluido en la página 19
EXA3245.Qx 1/27/3 10:00 AM Page 17 Selecting a Different Channel If you encounter interference while using your phone, you can manually change the phone´s channel for clear operation. This function works only when the phone is in use. Press the channel key. The talk/batt low LED flashes indicating the phone is changing to another channel. For more information on interference, refer to TM • The UltraClear Plus "Precautions" on page 45. true compander circuitry virtually eliminates backgroun
Resumen del contenido incluido en la página 20
EXA3245.Qx 1/27/3 10:00 AM Page 18 Storing Phone Numbers in Memory Memory Dialing allows you to dial a number using just a few key presses. Your cordless phone stores up to 10 numbers in the handset. 1) Press the mem key. The talk/batt low LED flashes. • The pause feature is useful for long distance calling, 2) Enter the phone number, up to 20 digits. If a pause is needed during the dialing credit card dialing, sequence, press the redial/p key to insert a pause. Each pause counts as a dig
