Resumen del contenido incluido en la página 1
Resumen del contenido incluido en la página 2
Resumen del contenido incluido en la página 3
QUICK REF E RE NC E GUIDE Step 1 Checking the Package Contents Step 2 Install and Charge the Handset Battery Make sure your cordless phone’s packaging includes the TO INSTALL THE HANDSET BATTERY following items (the number of items may vary depending on (See page 12 for details) model number within this series). If any of these items are Charge the handset battery pack for missing or damaged, contact the Uniden Parts Department. at least 15-20 hours before using your new cordless telep
Resumen del contenido incluido en la página 4
Step 3 Connect to Phone Line TO SET LANGUAGE When the handset battery pack Press menu/del in standby mode. is fully charged after 15-20 hours of charging, plug the Press ring/vol/∧ or ring/vol/∨ telephone cord into the base to select Handset Setup and unit and then into a telephone then select/ . wall jack. Your phone is set for tone Press ring/vol/∧ or ring/vol/∨ dialing. If your local network to select Language and then requires pulse dialing, refer to select/ . page 27. P
Resumen del contenido incluido en la página 5
Guía de refe ren c ia 1° Paso Inspección del contenido del embalaje 2° Paso Instalación y carga de la pila para el receptor Asegúrese de que haya recibido los siguientes artículos en el Para instalar la pila del receptor paquete (la cantidad de artículos puede variar dependiendo del (Consulte la página 12 para más detalles) número del modelo dentro de la serie). Si alguno de estos Cargue el paquete de batería to pila artículos falta o está dañado, comuníquese con el departamento por lo
Resumen del contenido incluido en la página 6
3° Paso Conexión a la línea telefónica Para programar el lenguaje Oprima menu/del en el modo de Cuando el paquete de pilas del receptor esté espera. totalmente cargado, después de una carga de 15-20 horas, conecte el cable telefónico en la Oprima ring/vol/∧ o ring/vol/∨ base y luego en el enchufe telefónico de la pared. para seleccionar la Progr Su teléfono está programado receptor, y luego select/ . paramarcar por tono. Al enchufe Telefónico Oprima ring/vol/∧ o ring/vol/∨ A la lí
Resumen del contenido incluido en la página 7
Contents QUICK REFERENCE GUIDE 1 CALLER ID 45 Caller ID and CIDCW (Caller ID on Call Waiting) 45 WELCOME/FEATURES/TERMINOLOGY 6 Viewing the Caller ID List 46 CONTROLS AND FUNCTIONS 8 Deleting a Caller ID Message 47 DISPLAY AND ICONS 10 Using the Caller ID Message List 48 GETTING STARTED 11 Setting up the Phone 11 Call Waiting Deluxe Features 49 Mounting the Base Unit on a Wall 15 THE INTEGRATED ANSWERING DEVICE 50 About the Menu Options 17 The Integrated Answering Device 50 Setting Menu Option
Resumen del contenido incluido en la página 8
WE LCOM E/ FEAT URE S / Congratulations on your purchase of the Uniden Expandable Cordless System telephone. This unit Welcome is different from conventional cordless telephones. When the base unit is connected to AC power and a telephone line, it can support up to 4 handsets. Using extra handsets, you can establish a 4-way conference call (2 handsets - Base Speaker Phone - an outside line). Additionally, with 4- way conference using 2 handsets, another 2 handsets can establish an intercom
Resumen del contenido incluido en la página 9
WE LCOM E/ FEAT URE S / This series features include AutoTalk and AutoStandby. AutoTalk allows you to answer a call by just removing the handset from the cradle so you don't have to waste time pushing buttons. AutoStandby allows you to hang up by simply returning the handset to the cradle. To protect you against mis-billed calls, which might result from your phone being activated by other equipment, this series has Random Code digital security, which automatically selects one of over app
Resumen del contenido incluido en la página 10
CONTROLS & FUNCTI O N S Controls & Functions 1. Handset Antenna 1 2. Headset Jack Cover 3. Beltclip Hole 6 4. Hands-Free Speaker 2 7 5. Handset Battery Compartment 6. New Message LED 3 7. Handset Earpiece 4 8 8. LCD Display 14 9. Menu/del (delete) Key (P. 21 / P. 31, 43, 47) 15 9 10. (ring)/vol (volume) and ∧/∨ (P. 31 / P. 21) 16 10 17 a. ringer and volume control b. scroll keys for display screen
Resumen del contenido incluido en la página 11
CONTROLS & FUNCTI O N S 23 24 25 26 27 28 29 30 31 32 33 40 34 41 35 42 36 43 37 38 44 45 39 46 47 48 49 50 23. Base Speaker 33. Memo record Key (P. 61) 43. (ring)/volume and ∧/∨ (P. 53) 24. Clock/MENU Key (P. 53) 34. Ans on/off Key (P. 51) 44. (speaker) Key/speaker LED (P. 29) 25. |<< repeat/SELECT Key (P. 59, 54) 35. Greeting Key (P. 52) 45. Base Antenna 26. ∅delete Key (P. 60) 36. mem (memory) Key (P. 44) 46. Do not disturb Key/DND LED (P. 32) 27. Charge LED 37. Redial/p (pause) Key (P. 31
Resumen del contenido incluido en la página 12
DIS P LAY AND I C ONS Display and Icons Example of the standby mode display Day of the week and time / battery icon Handset ID and Banner Number of new Caller ID calls received / Ringer off icon (when the ringer is Off) ICON STATUS DESCRIPTION Battery icons indicate the handset battery status. This icon cycles depending on Standby/Talk the battery status (empty, low, medium, and full). Standby Ringer off icon indicates that ringer is turned off. Talk Mute icon appears when you mute
Resumen del contenido incluido en la página 13
GETTING STARTED Setting up the Phone Do the following steps: note A. Choose the best location. B. Install the rechargeable battery pack into the handset. If your home has C. Connect the base unit. specially wired alarm A. Choose the best location equipment connected to the telephone line, be Before choosing a location for your new phone, read “Installation Considerations” on page sure that installing the 79. Here are some important guidelines you should consider: system does not disable
Resumen del contenido incluido en la página 14
B. Install the rechargeable battery pack into the handset Charge the handset battery pack for at least 15-20 hours before using your new cordless note telephone for the first time! The handset is powered by a rechargeable battery pack. The battery recharges automatically when the handset is placed in the base unit. To maximize the charge capacity of your battery pack, DO NOT plug the telephone cord into the base unit Use only the Uniden and wall jack until the battery is fully charged. (
Resumen del contenido incluido en la página 15
GETTING STARTED Low battery alert When the battery pack is very low and need to be charged, the phone is programmed to note eliminate functions in order to save power. The battery pack needs to be charged when: - The empty battery icon appears. Even when the battery pack is not being used, - Low Battery appears in the display. it will gradually If the phone is in standby mode, none of keys will operate. discharge over a long If you are on a call, complete your conversation as quickly
Resumen del contenido incluido en la página 16
C. Connect the base unit 1) Connect the AC adapter to the DC IN 9V jack and to note a standard 120V AC wall outlet. 2) Set the base on a desk or tabletop, and place the Use only the supplied handset in the base unit. [AD-830] AC adapter. 3) Raise the antenna to a vertical position. Do not use any other 4) Make sure that the charge LED illuminates. AC adapter. If the LED does not illuminate, check to see that the Place the power cord AC adapter is plugged in and the handset makes so t
Resumen del contenido incluido en la página 17
GETTING STARTED Mounting the Base Unit on a Wall Standard wall plate mounting This phone can be mounted on any standard wall plate. DO NOT use an AC 1) Snap the wall mount adapter into the notches on the outlet controlled by a base top. wall switch. 2) Plug the AC adapter into the DC IN 9V jack. 3) Wrap the AC adapter cord inside the molded wiring channel as shown. 4) Plug the AC adapter into a standard 120V AC wall outlet. 5) Plug the telephone line cord into the TEL LINE jack. Wrap
Resumen del contenido incluido en la página 18
GETTING STARTED Direct wall mounting If you don't have a standard wall plate, you can mount your phone directly to the wall. Before doing this, consider the following: Avoid electrical cables, pipes, or other items behind the mounting location that could cause a hazard when inserting screws into the wall. Try to mount your phone within 5 feet of a working phone jack to avoid excessive lengths. Make sure the wall material is capable of supporting the weight of the base and handset. Us
Resumen del contenido incluido en la página 19
GETTING STARTED About the Menu Options Your phone has six main menu setup options: DirectLink Mode, Room/Baby Monitor, note Handset Setup, Answ. Setup, Global Setup and System Reset. Each menu have submenu. For Global Setup and Summary of Main Menu Options and Submenu Option System Reset, make sure the line is not in use and handsets are DirectLink Mode (handset only) within the range limit of the base unit. In DirectLink Mode, a pair of handsets can function as two-way radios. DirectLin
Resumen del contenido incluido en la página 20
GETTING STARTED Handset Setup The following submenu options must be set separately for each handset. Submenu option Description Ringer Tones Adjusting the ringer tone (see page 22). (Default is Flicker) Set the distinctive ring (tone your phone makes when ringing) (see page 23). "Distinctive Ringer" allows you to preset memory locations with a designated ring tone. When an incoming call is received and the Caller ID information matches the information in one of the memory locations, the dis
