Resumen del contenido incluido en la página 1
Mira 100
CORDLESS TELEPHONE
OPERATING GUIDE
Resumen del contenido incluido en la página 2
Mira 100 Dear Customer, Congratulations on having bought the TOPCOM Mira 100 cordless telephone. The Mira 100 is a quality product which offers you a whole range of possibilities and is easy to oper- ate. This operating guide gives you a complete view of all the possible functions. We advise you to first read this operating guide thoroughly before using your Mira 100. Kind regards, TOPCOM COPYRIGHT 1996 TOPCOM® N.V. 3
Resumen del contenido incluido en la página 3
Mira 100 Mira 100 TABLE OF CONTENTS 1. IMPORT A N T 1. IMPORTANT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Treat the telephone with care. Never place it in a dusty environment and do not 2. BASE EQUIPMENT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 expose it to extreme temperatures or direct sunlight. 3. HANDSET . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 3.1. FR
Resumen del contenido incluido en la página 4
Mira 100 Mira 100 3. HANDSET 4. BASE STA T I O N 3.1. FRONT VIEW 4.1. TOP VIEW 1. Line button 1. Antenna 2. Numerical buttons 2. Power indicator 3. # button 3. Radio connection indicator 4. Memory button 4. Battery indicator 5. Paging button 5. Redial button 6. Battery charger contacts 6. Transfer button (flash) R 7. Set button 8. Mute button 9. Hang-up button 10. button/ P->T switch 11. Ringer volume switch 12. ON/OFF-switch 13. Battery charger contacts 3.2. REAR VIEW 1. Antenna 2. Battery
Resumen del contenido incluido en la página 5
Mira 100 Mira 100 The battery of the handset has to be charged before telephone calls can be 5. GENERAL made. The first time the unit is used, it takes at least 10 hours before the battery is fully charged. With cordless telephones, radio connection replaces the cord connecting the handset to the base unit of traditional telephones. This allows you to make and Put the handset on the connected base station to charge the battery. The battery receive calls even when you are away from the base unit.
Resumen del contenido incluido en la página 6
Mira 100 Mira 100 8.2.2. BACK TO PULSE DIALLING 8. OPERA T I O N 1. Press the line button and wait for the dial tone. 2. Press the set button (“SET” appears on the display). 8.1. OUT OF RANGE W A R N I N G 3. Press the numbers “28” and the # button. 4. Press the line button . Obstacles between the handset and the base station will influence the operation range. When the handset is too far away from the base station, the quality of the connection will deteriorate and you will hear a warning tone
Resumen del contenido incluido en la página 7
Mira 100 Mira 100 8.6. HANG-UP BUTTON 8.9. TEMPORARY PULSE -> TONE SWITCH When you have made a mistake while dialling a telephone number, you can press The Mira 100 has been preset to pulse dialling. It is however possible to switch the hang-up button and dial the number again. By pressing the hang-up temporarily to tone dialling f.i. for telebanking, pager calls, ... button it is also possible to make several phone calls after each other with- You can use this function by pressing the button i
Resumen del contenido incluido en la página 8
Mira 100 Mira 100 8.10.2. DIALLING A MEMORY NUMBER 8.11.1. ACTIVATE CALL BARRING 1. Press the line button and wait for the dial tone. 1. Press the line button and wait for the dial tone. 2. Press the memory button (“SPEED DIAL” appears on the display). 2. Press the set button (“SET” appears on the display). 3. Press the number of the memory place, where the telephone number has been 3. First press the number “3” and then the button (first “LOCKED” appears on stored (0-9). The telephone number i
Resumen del contenido incluido en la página 9
Mira 100 Mira 100 3. Enter the code number 3719 (“SET BABYCALL” appears on the display). 1. Press the line button and wait for the dial tone. 4. Enter the desired telephone number. 2. Press the set button (“SET” appears on the display). 5. Press the set button (“DONE” appears on the display). 3. Enter the code number: 6. Press the line button to stop the radio connection. codenumber 461 = 1 second pause codenumber 462 = 2 seconds pause codenumber 463 = 3 seconds pause (standard) 8.12.2. ACTIVATE
Resumen del contenido incluido en la página 10
Mira 100 Mira 100 8.15. SETTING RINGER VOLUME 10. TECHNICAL SPECIFICA T I O N S The ringer volume of the handset and the base station can be set by means of a Frequency 900 MHz ringer volume switch. On the backside of the base station you will see a switch Power 10 mw with 3 positions. On the handset a switch with 2 positions is present on the right Transmission range inside buildings - max 60 m side (front of handset facing you). outside - max 300 m Dialling system Pulse/tone switch possible M
Resumen del contenido incluido en la página 11
Mira 100 11. W A R R A N T Y The Mira 100 has been manufactured and tested to offer you complete satisfac- tion. TOPCOM secures this device against material and construction defects for a period of 12 months counting from the date the first user purchased it. The war- ranty card is only valid if the warranty card has been filled in duely, dated and signed. The warranty card has to be sent back within 10 days after the purchase date to TOPCOM. The warranty expires completely if people other than
