Resumen del contenido incluido en la página 1
Resumen del contenido incluido en la página 2
Table of Content SAFETY INFORMATION...................................................................... 1 INTRODUCTION................................................................................... 1 Configuration with a Single Computer ...........................................................1 Configuration within a Home or Office Network.............................................2 Package Contents...............................................................................
Resumen del contenido incluido en la página 3
SOYO G668 Ethernet IP Phone User Guide Safety Information The SOYO IP Phone has been tested and approved by the highest standards of safety regulations. However safety is your responsibility too. Use only the power adapter provided Do not disassemble this product without guidance, no serviceable parts for user. Never spill liquid of any kind on the product Do not cut power off in the process of configuration and upgrading *The specifications herein may subject to change without noti
Resumen del contenido incluido en la página 4
SOYO G668 Ethernet IP Phone User Guide Note: Some Internet Service Providers provide only one public IP address. Therefore the computer and the IP phone can not be online at the same time. Please refer to the following configuration. Configuration within a Home or Office Network You can connect G668 IP phone to any router on a network with broadband Internet connection such as DSL, Cable or T1. 2
Resumen del contenido incluido en la página 5
SOYO G668 Ethernet IP Phone User Guide Package Contents Make sure the following contents are included in the G668 IP phone package: One SOYO G668 IP phone One DC 7.5V 0.45A Power Adapter User Manual One Ethernet RJ-45 Cable SOYO G668 IP phone Power Adapter User Manual Ethernet RJ-45 Cable 3
Resumen del contenido incluido en la página 6
SOYO G668 Ethernet IP Phone User Guide Front Panel of SOYO G668 IP phone 4
Resumen del contenido incluido en la página 7
SOYO G668 Ethernet IP Phone User Guide Keys Functions Local IP Without lifting the handset, press to get the IP address of this IP phone Subnet Mask Without lifting the handset, press to get the Subnet Mask Phone Number Without lifting the handset, press to get the phone number Dialed Calls Without lifting the handset, press to get the list of the dialed numbers Received Calls Without lifting the handset, press to get the list of the received numbers Missed Calls Without lifting the ha
Resumen del contenido incluido en la página 8
SOYO G668 Ethernet IP Phone User Guide Rear Side of SOYO G668 IP phone 6
Resumen del contenido incluido en la página 9
SOYO G668 Ethernet IP Phone User Guide Installation Depending on your network environment, you will need to perform one of the following installations: Installation with a Single Computer Installation with a Home or Office Network Installation with a Single Computer Note: Some Internet Service Providers provide only one public IP address. Therefore the computer and the IP phone can NOT be online at the same time. Using a router is highly recommended. Broadband Computer Modem (Option
Resumen del contenido incluido en la página 10
SOYO G668 Ethernet IP Phone User Guide Booting … DHCP Connecting … Ready For Calls SOYO_Group 5. If “Ready for Calls” appears on the LCD screen as shown above, your IP phone is ready to use. Now you can pick up the hand set and start making phone calls. Important: It may take about 20 seconds for the phone to initialize during setup, please be patient and wait till the initialization completed. 6. If you are using a DSL modem and the LCD screen displayed “Wait Logon…” or
Resumen del contenido incluido en la página 11
SOYO G668 Ethernet IP Phone User Guide Installation within a Home or Office Network Broadband Computer 1 Modem Computer 2 WAN LAN Computer (Optional) WAN LAN Router IP Phone 1. Connect one end of the Ethernet RJ-45 cable to an open Ethernet LAN port on your router, and connect the other end of the cable to the WAN port at the rear of the G668 IP phone. 2. Using another RJ-45 cable, you can connect one end of the Ethernet RJ-45 cable to your computer, and conne
Resumen del contenido incluido en la página 12
SOYO G668 Ethernet IP Phone User Guide 5. If “Ready for Calls” appears on the LCD as above, your IP phone is ready to use. Now you can pick up the hand set and start making phone calls. 6. If you still have problems logging on, please refer to “Troubleshooting” on page 20. If problem persist then contact your VoIP provider. 10
Resumen del contenido incluido en la página 13
SOYO G668 Ethernet IP Phone User Guide Configuration via IP Phone Keypad Configuration for DHCP (default) The SOYO-G668’s default setting is set on DHCP enabled. If you have a router with DHCP support, or if you connect the IP phone directly to the cable modem with dynamic IP address from the ISP, you don’t need to perform any of the following configurations. If you are using PPPoE or static IP, you will need to follow the instructions below to setup the phone. Please make sure the IP p
Resumen del contenido incluido en la página 14
SOYO G668 Ethernet IP Phone User Guide Configuration for PPPoE This setting is for users using DSL modem without a router. You will need the username and password from you ISP to setup your IP phone. Please make sure you have entered the “networking settings” before proceeding. LCD SCREEN INSTRUCTION network Press Speaker settings ip type Press Local IP, then 2, then press Speaker 1 [DHCP] ip type Press Volume+, until you see “pppid” 2 [PPPoE] pppid Press Local IP, i
Resumen del contenido incluido en la página 15
SOYO G668 Ethernet IP Phone User Guide LCD SCREEN INSTRUCTION network Press Speaker settings ip type Press Local IP, then 0, then Speaker 1 [DHCP] ip type Press Volume+, until you see “ip” 2 [PPPoE] ip Press Local IP, input your static IP and press Speaker, then press Volume+ until you see “subnetmask” subnetmask Press Local IP, input specific network mask and press Speaker, then press Volume+ until you see “router” router Press Local IP, input specific router IP a
Resumen del contenido incluido en la página 16
SOYO G668 Ethernet IP Phone User Guide Configuration via Web Browser First find out the IP address of the phone by pressing the Local IP button on the keypad of the phone. Then on a PC connected to the IP phone or at the same network segment of the IP phone, open the IE browser. Input the IP address of the phone, and then input password (default: 1234) of the phone into the following page. Now you will see following screen: Network Settings iptype: Set how IP phone gets relevant networ
Resumen del contenido incluido en la página 17
SOYO G668 Ethernet IP Phone User Guide dhcp: Select this item to enable DHCP mode. With this system, your LAN or router automatically assigns all the required network parameters to any device connected to it when the device log on. So, if your LAN or router is configured to use DHCP addressing, the IP phone’s LAN parameters will automatically be configured as soon as it is connected to the LAN or router and powered up. pppoe ： Select this item to enable PPPoE protocol. Some DSL providers
Resumen del contenido incluido en la página 18
SOYO G668 Ethernet IP Phone User Guide nat addr: The NAT IP address required by certain type of traversal method. phone number: Virtual IP phone number, the caller ID that will show up on the recipient’s IP phone. account: H.323 ID of the IP phone. rtp port: RTP port is the port transferring and receiving voice flow using UDP. Please fill an even number between 1024 and 65535 into this field. register port: Register port is the source port used by the IP phone to register to the gatekeep
Resumen del contenido incluido en la página 19
SOYO G668 Ethernet IP Phone User Guide Note: Some VoIP providers do not provide call forwarding function. Other Settings password: Set the password of the phone setting. (Default password is 1234). upgrade addr: Enter IP address or domain name of the FTP server supplying the update programs. Check with your VoIP service provider for detail. sntp ip: Enter IP address of the Internet time server here. use daylight: Enable/disable daylight by checking/unchecking this box. timezone: Selec
Resumen del contenido incluido en la página 20
SOYO G668 Ethernet IP Phone User Guide In this page, you can set and save the speed dial number by typing the name into the Name field and then entering the corresponding number following the name. For example, input “Tom” in Name field following 001, and then input the number, 14081234567 into Phone number field. So Tom’s number 14081234567 is saved in the phone book. Then please click Save/Back button at the bottom of the screen. Make sure click the Save/Reboot button to save them int
