Resumen del contenido incluido en la página 19
43-3578.book Page 19 Thursday, February 12, 2004 3:12 PM 2. Press VOL/ three times to move the cursor to Dial:, then press SEL to change the dialing mode setting. Tone or Pulse appears, indicating the selected setting. 3. Return the handset to the base (or press END) to store the new setting. SELECTING THE LANGUAGE You can select the language on the display from; English, French and Spanish. 1. Lift the handset and hold down CID/MENU until the menu appears with Auto Talk selected.
Resumen del contenido incluido en la página 20
Operation 43-3578.book Page 20 Thursday, February 12, 2004 3:12 PM OPERATION The handset window has plastic film on it to protect it during shipment. Carefully peel off the film before using your phone. MAKING AND RECEIVING CALLS To make a call, lift the handset and press TALK/FLASH. Talk and the current volume setting appear on the handset’s display, and the CHARGE/IN USE indicator on the base lights. Dial the number. The number appears on the handset as you dial, then the call’s e
Resumen del contenido incluido en la página 1
43-3578.book Page 1 Thursday, February 12, 2004 3:12 PM
900MHz Cordless Telephone
with Caller ID/Call Waiting
43-3578
10-Number Memory Dialing — lets you store
up to 10 numbers in memory for easy dialing.
30-Record CID Capacity — stores
up to 30 call records in Caller ID.
Ample Talk and Standby Time — the supplied
battery (when fully charged) provides about 7
hours of talk time or 14 days of standby time.
Headset Jack — lets you connect an optional
headset for hands-free convenience.
Aut
Resumen del contenido incluido en la página 2
43-3578.book Page 2 Thursday, February 12, 2004 3:12 PM CONTENTS Chain-Dialing Service Introduction .............................. 3 Numbers ................................. 30 Important Information .............. 4 Testing Stored Emergency FCC Statement ............................ 4 Numbers ................................. 31 Surge Protection .......................... 6 Speed Dialing ............................ 31 Important Safety Instructions ... 7 Storing a Number in Speed Dial ...
Resumen del contenido incluido en la página 3
43-3578.book Page 3 Thursday, February 12, 2004 3:12 PM INTRODUCTION IMPORTANT ! ! Thank you for purchasing the • Cordless phones such as this one require AC RadioShack 900 MHz Cordless power to operate. Telephone. Your phone uses advanced When the power is off, technology to give you superior audio you cannot make or quality and extended range. The receive calls using your phone. To be phone’s Caller ID unit records each safe, you should also caller’s telephone number (and name
Resumen del contenido incluido en la página 4
Important Information 43-3578.book Page 4 Thursday, February 12, 2004 3:12 PM As an ENERGYSTAR Partner, RadioShack Corporation has determined that this product meets the ENERGYSTAR guidelines for energy efficiency. IMPORTANT INFORMATION This telephone has been tested and found to comply with all applicable UL and FCC standards. FCC STATEMENT Your phone complies with Part 68 of FCC Rules. You must, upon request, provide the FCC registration number and the REN to your telephone compa
Resumen del contenido incluido en la página 5
43-3578.book Page 5 Thursday, February 12, 2004 3:12 PM We have designed your phone to conform to federal regulations, and you can connect it to most telephone lines. However, each phone (and each device, such as a telephone or answering machine) that you connect to the telephone line draws power from the telephone line. We refer to this power draw as the device’s ringer equivalence number, or REN. The REN is on the back of your phone. If you use more than one phone or other devic
Resumen del contenido incluido en la página 6
Important Information 43-3578.book Page 6 Thursday, February 12, 2004 3:12 PM This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. Privacy of communications, may not be ensured when using this phone. SURGE PROTECTION Your telephone has built-in protection circuits
Resumen del contenido incluido en la página 7
43-3578.book Page 7 Thursday, February 12, 2004 3:12 PM IMPORTANT SAFETY INSTRUCTIONS When using your telephone equipment, basic safety precautions should always be followed to reduce the risk of fire, electric shock and injury to persons, including the following: 1. Do not use this product near water, for example, near a bathtub, wash bowl, kitchen sink, or laundry tub, in a wet basement, or near a swimming pool. 2. Avoid using a telephone (other than a cordless type) during an electri
Resumen del contenido incluido en la página 8
Important Caller ID Information 43-3578.book Page 8 Thursday, February 12, 2004 3:12 PM IMPORTANT CALLER ID INFORMATION To use Caller ID and Call Waiting, you must be in an area where those services are available and you must subscribe to those services through your local phone company. Where Caller ID is offered, one or more options are generally available: • caller’s number only • caller’s name only • caller’s name and number If you subscribe to Call Waiting ID and Caller ID, the s
Resumen del contenido incluido en la página 9
43-3578.book Page 9 Thursday, February 12, 2004 3:12 PM INSTALLATION CAUTION You must use a Class 2 SELECTING A LOCATION ! power You can place the phone’s base on a source that supplies desk or table, or mount it on a standard 9V DC and delivers at wall plate or directly on a wall. Select a least 210 mA. Its location that is: center tip must be set to positive and its plug • near an accessible AC outlet must fit the phone’s • near a telephone line jack DC IN 9V jack. The suppl
Resumen del contenido incluido en la página 10
Installation 43-3578.book Page 10 Thursday, February 12, 2004 3:12 PM Your telephone connects directly to a modular telephone line jack. If your telephone wiring does not have a modular jack, you can update the wiring yourself using jacks and adapters (available at your local RadioShack store), or have the telephone company Ô NOTES Ô update the wiring for you. You must use compatible modular jacks that are • If your home has compliant with Part 68 of FCC Rules. Ô specially wired al
Resumen del contenido incluido en la página 11
43-3578.book Page 11 Thursday, February 12, 2004 3:12 PM 1. Insert the two tabs at the top of the narrow end of the supplied bracket into the base’s upper tab slots, then press down on the bracket’s latches and insert them into the lower slots. 2. Plug one end of the supplied modular cord (short for a wall plate, long for direct wall mounting) into the TEL LINE jack on the base’s back. 3. Insert the DC IN 9V TEL LINE supplied AC adapter’s barrel plug into the DC IN 9V jack.
Resumen del contenido incluido en la página 12
Installation 43-3578.book Page 12 Thursday, February 12, 2004 3:12 PM For direct wall IMPORTANT ! ! mounting, align The EPA the bracket’s certified keyhole slots ® RBRC with the Battery mounting screws Recycling Seal on and slide the base downward to the nickel-cadmium (Ni- secure it. Then, plug the modular Cd) battery indicates cord's other end into a telephone RadioShack is volun- outlet. tarily participating in an industry program to 6. Plug the adapter into a standard
Resumen del contenido incluido en la página 13
43-3578.book Page 13 Thursday, February 12, 2004 3:12 PM To charge the battery pack, place the handset on the base. The CHARGE/IN USE indicator on the base lights and Total:00 appears on the handset display. Recharge the battery pack when Low Battery flashes on the display. If you have trouble replacing the battery WARNING pack, take the phone to your local o o RadioShack for assistance. ! Dispose of the old o battery pack promptly and properly. Do not Recharging the Battery
Resumen del contenido incluido en la página 14
Installation 43-3578.book Page 14 Thursday, February 12, 2004 3:12 PM • If the battery pack becomes weak during a call, the handset beeps every 3 seconds and Low Battery flashes. When this happens, you cannot make a call until you recharge the battery pack. • If the display is blank and the phone does not work, recharge the battery pack. (The battery power might be too low to light the display.) • About once a month, fully discharge the battery by keeping the handset off the base u
Resumen del contenido incluido en la página 15
43-3578.book Page 15 Thursday, February 12, 2004 3:12 PM • The supplied battery pack should last for about a year. If the battery pack does not hold a charge for more than 2 hours after an overnight charge, replace it with a new 3.6-volt, 600 mAh battery pack with a connector that fits the socket in the battery compartment. You can order a replacement battery pack through your local RadioShack store. Install the new battery pack and charge it for about 15–20 hours. SETTING THE RIN
Resumen del contenido incluido en la página 16
Installation 43-3578.book Page 16 Thursday, February 12, 2004 3:12 PM TURNING AUTO TALK ON/OFF Your phone is preset so you must press TALK/FLASH when you lift the handset from the base to answer a call. With Auto Talk turned on, you can answer a call by just lifting the handset from the base. If the handset is away from the base, you can answer by pressing TALK/FLASH, any number, ∗/TONE/ , or #/ . 1. Lift the handset and hold down CID/MENU until the menu appears with Auto Talk se
Resumen del contenido incluido en la página 17
43-3578.book Page 17 Thursday, February 12, 2004 3:12 PM 1. Lift the handset and hold down CID/MENU until the menu appears with Auto Talk selected. 2. Press VOL/ to move the cursor to CIDCW: (Caller ID/Call Waiting). 3. Press SEL to turn the Caller ID/Call Waiting setting on or off. On or Off appears indicating the selected setting. 4. Return the handset to the base to store the new setting. STORING YOUR AREA CODE You can store your local area code in Ô NOTE Ô the phone’s memory so
Resumen del contenido incluido en la página 18
Installation 43-3578.book Page 18 Thursday, February 12, 2004 3:12 PM 3. Press SEL, then enter your three- digit area code. If you make a mistake, use the DEL/CH to erase the wrong number, then enter the correct number. 4. Press SEL to store the area code, IMPORTANT ! ! then return the handset to the base In some areas, the area (or press END) to clear the display. ! code is necessary even for a local call. If you live in such an area, do not SETTING THE DIALING store the area cod
