Resumen del contenido incluido en la página 1
®
A Division of Cisco Systems, Inc.
Wireless-G
IP Phone
User Guide
Voice
Model No.
WIP330
Resumen del contenido incluido en la página 2
Resumen del contenido incluido en la página 3
Wireless-G IP Phone Copyright and Trademarks Specifications are subject to change without notice. Linksys is a registered trademark or trademark of Cisco Systems, Inc. and/or its affiliates in the U.S. and certain other countries. Copyright © 2005 Cisco Systems, Inc. All rights reserved. Other brands and product names are trademarks or registered trademarks of their respective holders. WARNING: This product contains chemicals, including lead, known to the State of California to cause cancer,
Resumen del contenido incluido en la página 4
Wireless-G IP Phone
Resumen del contenido incluido en la página 5
Wireless-G IP Phone Table of Contents Chapter 1: Introduction 1 Welcome 1 What’s in This User Guide? 1 Chapter 2: Getting to Know the Wireless-G IP Phone 3 The Bottom Panel 3 The Front and Side Panels 4 The Back Panel 6 Chapter 3: Installing and Using the Wireless-G IP Phone 7 Overview 7 Inserting the Battery into the Wireless-G IP Phone 7 Powering on the Wireless-G IP Phone 8 Navigating the Wireless-G IP Phone 10 Setting up the Wireless-G IP Phone 12 Using the Wireless-G IP Phone 22 Chapter 4:
Resumen del contenido incluido en la página 6
Wireless-G IP Phone List of Figures Figure 2-1: Bottom Panel 3 Figure 3-20: Edit Outbound Proxy Port 18 Figure 2-2: Front Panel 4 Figure 3-21: Save Expire Time 18 Figure 2-3: Symbol Selection 5 Figure 3-22: Save Phone Number 19 Figure 2-4: Side Panel 6 Figure 3-23: Save User Name 19 Figure 2-5: Back Panel 6 Figure 3-24: Save Password 20 Figure 3-1: Press the Button 7 Figure 3-25: Save SIP Settings 20 Figure 3-2: Insert the Battery 7 Figure 3-26: Return to Standby Screen 21 Figure 3-3: Connect th
Resumen del contenido incluido en la página 7
Wireless-G IP Phone Figure 4-13: Enter Name 33 Figure 4-39: Edit EAP Type (WPA-PSK) 42 Figure 4-14: Select Network Settings 34 Figure 4-40: Change EAP Type (WPA-PSK) 42 Figure 4-15: Network Settings - DHCP 34 Figure 4-41: Enter SSID 42 Figure 4-16: Network Settings - Fixed IP 35 Figure 4-42: Change Transmit Key 43 Figure 4-17: Enter IP Address 35 Figure 4-43: Edit WPA Key 43 Figure 4-18: Edit Subnet Mask 35 Figure 4-44: Profile Added 44 Figure 4-19: Enter Subnet Mask 35 Figure 4-45: Select Hots
Resumen del contenido incluido en la página 8
Wireless-G IP Phone Figure 4-65: Edit Download URL 51 Figure 4-66: Upgrade in Progress 51 Figure 4-67: Upgrade Successful 51 Figure 4-68: Edit Proxy IP 52 Figure 4-69: Enter Proxy IP 52 Figure 4-70: Enter Register Proxy IP 52 Figure 4-71: Enter Register Proxy Port 52 Figure 4-72: Change Outbound Proxy IP 53 Figure 4-73: Edit Outbound Proxy Port 53 Figure 4-74: Change Expire Time 53 Figure 4-75: Change Phone Number 53 Figure 4-76: Change User Name 54 Figure 4-77: Change Password 54 Figure 4-78: E
Resumen del contenido incluido en la página 9
Wireless-G IP Phone Chapter 1: Introduction Welcome Thank you for choosing the Linksys Wireless-G IP Phone. It will allow you to make phone calls using your ip (internet protocol): a protocol used to broadband connection, whether you are at home, in your office, or at a public hotspot. send data over a network. How does the IP Phone do this? It connects to your wireless router or gateway, so telephone service is delivered through your cable or DSL Internet connection. You can also surf the Int
Resumen del contenido incluido en la página 10
Wireless-G IP Phone Chapter 2: Getting to Know the Wireless-G IP Phone This chapter describes the physical features of the IP Phone. Chapter 3: Installing and Using the Wireless-G IP Phone This chapter explains how to install the IP Phone and use it. Chapter 4: Configuring the Wireless-G IP Phone This chapter discusses how to configure the IP Phone’s settings. Appendix A: Troubleshooting This appendix describes some potential problems and solutions, as well as frequently asked questions,
Resumen del contenido incluido en la página 11
Wireless-G IP Phone Chapter 2: Getting to Know the Wireless-G IP Phone The Bottom Panel The IP Phone’s headset jack and USB port are located on the bottom panel. Headset USB Port Jack Figure 2-1: Bottom Panel Headset Jack This jack allows you to connect a headset. USB Port The USB port allows you to attach the included power adapter. Chapter 2: Getting to Know the Wireless-G IP Phone 3 The Bottom Panel
Resumen del contenido incluido en la página 12
Wireless-G IP Phone Power LED The Front and Side Panels The power LED is located at the top of the IP Phone, while its buttons are located on the front and side panels. Power LED Blue/Red/Purple. The LED is a solid blue when the IP Phone is powered on and ready for phone calls. It flashes red when the IP Phone is not ready for phone calls. The LED alternates between blue and purple when the IP Phone is powered off and charging. The buttons of the IP Phone are described in this table. Icon Bu
Resumen del contenido incluido en la página 13
Wireless-G IP Phone Icon Button Name Function Power or End Call Press and hold this button for two seconds to power the IP Phone on or off. Ends the call or exits the current menu Different Key To enter an entry or setting, use Choices or + Sign the keypad. Keys 1-9 can represent uppercase letters (A, B, C), lowercase letters (a, b, c), or numbers (1, 2, 3). Press the * (star) key to switch between the different choices. Press the * (star) key twice to enter the + sign. Enter Symbol or
Resumen del contenido incluido en la página 14
Wireless-G IP Phone Icon Button Name Function Volume Increases or decreases the volume The Back Panel Volume The IP Phone’s battery compartment is located on the back panel of the IP Phone. For directions on how to insert the battery, refer to “Chapter 3: Installing and Using the Wireless-G IP Phone.” Battery Compartment Figure 2-4: Side Panel Figure 2-5: Back Panel 6 Chapter 2: Getting to Know the Wireless-G IP Phone The Back Panel
Resumen del contenido incluido en la página 15
Wireless-G IP Phone Chapter 3: Installing and Using the Wireless-G IP Phone Overview This chapter provides instructions for first-time installation and use of the IP Phone. You will insert the battery Metal Contacts into the IP Phone and then set it up for your wireless network and Internet phone service. Then you will be able to make and receive Internet phone calls. Inserting the Battery into the Wireless-G IP Phone To insert the battery, follow these instructions: 1. Remove the cover of the
Resumen del contenido incluido en la página 16
Wireless-G IP Phone Powering on the Wireless-G IP Phone Make sure you have the account information, including necessary IP Phone settings, supplied by your Internet phone service provider. If you already have an account set up with your Internet phone service provider, then proceed to step 1. If you do not have an account, then go to the website of your Internet phone service provider and sign up for service. After you have set up an account, proceed to step 1. 1. Make sure you have the accou
Resumen del contenido incluido en la página 17
Wireless-G IP Phone 3. The power LED will flash, alternating between blue and purple. For the initial charge, allow the battery to charge for at least 10 hours, so the battery will have a full charge, which is indicated by a solidly lit power LED. This maximizes battery performance and life. NOTE: When the battery is low on power, it will emit one warning sound or vibration, unless the Ring Type is set to Silent. (For more information about Ring Types, refer to Chapter 4: Configuring the Wir
Resumen del contenido incluido en la página 18
Wireless-G IP Phone Power LED Navigating the Wireless-G IP Phone Review the descriptions of the buttons you will use to navigate menus and select your choices. Icon Button Name Function Soft Key Press the left or right soft key to select the appropriate action shown on the left- or right- hand side of the screen. Navigation Pad To navigate menus and control and Center the cursor for the web browser, Selection Key use the navigation pad. Key Choice Use the center selection key to make menu c
Resumen del contenido incluido en la página 19
Wireless-G IP Phone Icon Button Name Function Different Key To enter an entry or setting, use Choices or + Sign the keypad. Keys 1-9 can represent uppercase letters (A, B, C), lowercase letters (a, b, c), or numbers (1, 2, 3). Press the * (star) key to switch between the different choices. Press the * (star) key twice to enter the + sign. Enter Symbol or Press the # (pound) key to open Space the Symbol Selection menu. Use the navigation pad to move through the menu. When you have the
Resumen del contenido incluido en la página 20
Wireless-G IP Phone Setting up the Wireless-G IP Phone Before you begin, make sure your network has an active Internet connection. 1. Press and hold the Power button for two seconds. 2. The IP Phone will boot up and automatically scan for wireless networks. Figure 3-6: Scan for Wireless Networks 3. A list of wireless networks will be displayed and show their wireless network names (also known as Service Set Identifier or SSID), security status (a lock indicates wireless security), and signal s
