Resumen del contenido incluido en la página 1
Model 28041
5.8GHz Color Handset
Speakerphone/Answering
System User’s Guide
Resumen del contenido incluido en la página 2
Equipment Approval Information Your telephone equipment is approved for connection to the Public Switched Telephone Network and is in compliance with parts 15 and 68, FCC Rules and Regulations and the Technical Requirements for Telephone Terminal Equipment published by ACTA. 1 Notification to the Local Telephone Company On the bottom of this equipment is a label indicating, among other information, the US number and Ringer Equivalence Number (REN) for the equipment. You must, upon request, pr
Resumen del contenido incluido en la página 3
Interference Information This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference; and () This device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection ag
Resumen del contenido incluido en la página 4
Table of Contents EquipmEnt Apprvo Al i nformA tion .................2 sounD setting ...............................................21 i E nt E rf E r E nc i nformA tion .............................3 ringer Volume ...........................................22 HEAring Aid c omp Atibility (HAc ) .................3 ringer tone ...............................................22 l icEnsing .....................................................3 key tone ...............................................
Resumen del contenido incluido en la página 5
image DoWnloaDing .......................................46 i E nt romc o E p A r tion ...................................34 hanDset to hanDset interCom Call ...........34 Choosing the DoWnloaDeD image as WallPaPer .......................................................46 reCeiVing an interCom Call..........................35 aDVanCeD interCom features .......................35 assigning the DoWnloaDeD image to Phone Book reCorD ...................................................46 reCeiVing a
Resumen del contenido incluido en la página 6
Introduction CAUTION: When using telephone equipment, there are basic safety instructions that should always be followed. Refer to the IMPORTANT SAFETY INSTRUCTIONS provided with this product and save them for future reference. IMPORTANT: Because cordless phones operate on electricity, you should have at least one phone in your home that isn’t cordless, in case the power in your home goes out. Before You Begin Parts Checklist (for model 28041xx1) Make sure your package includes the items s
Resumen del contenido incluido en la página 7
For Model 28041xx2 there will be ONE additional handset, charge cradle, belt clip, battery pack and cover than shown above. For Model 28041xx3 there will be TWO additional handsets, charge cradles, belt clips, battery packs and covers than shown above. For Model 28041xx4 there will be THREE additional handsets, charge cradles, belt clips, battery packs and covers than shown above. Telephone Jack Requirements Wall plate To use this phone, you need an RJ11C type modular telephone jack, which m
Resumen del contenido incluido en la página 8
Important Installation Guidelines • Avoid sources of noise and heat, such as motors, fluorescent lighting, microwave ovens, heating appliances and direct sunlight. • Avoid areas of excessive dust, moisture and low temperature. • Avoid other cordless telephones or personal computers. • Never install telephone wiring during a lightning storm. • Never install telephone jacks in wet locations unless the jack is specifically designed for wet locations. • Never touch non-insulated telephone wir
Resumen del contenido incluido en la página 9
Handset Layout VISUAL RING INDICATOR LIGHT EARPIECE display TALK/CALL BACK (button) MENU SELECT/MUTE (button) (button) CALLER ID-VOLUME CALLER ID-VOLUME (button) (button) SPEAKER (button) PHONEBOOK (button) REDIAL (button) rev (review button) skip (button) * EXIT (button) play (button) # PAUSE/ erase RINGER (button) (button) FLASH/DELETE INTERCOM (button) (button) MICROPHONE 9
Resumen del contenido incluido en la página 10
Base Layout HOUR MIN DAY/CHECK (button) (minute button) (button) VOL SPEAKER Message REVIEW (volume buttons) indicator (button) SKIP (button) ANNOUNCE 1 (button) ANNOUNCE 2 (button) PLAY/STOP 1 (button/indicator) PLAY/STOP 2 (button/indicator) PLAY/STOP 3 (button/indicator) DELETE (button) DO NOT DISTURB (button) PAGE MEMO CHARGE/IN USE Microphone (button) (button) (indicator) ANS ON/OFF LANGUAGE (answerer button) (button) 10
Resumen del contenido incluido en la página 11
Installing the Phone Installing the Handset Battery NOTE: You must connect the handset battery before using the cordless handsets. CAUTION: To reduce the risk of fire or personal injury, use only the Thomson Inc. approved model 5-2660 Nickel-metal Hydride battery (Ni-MH), which is compatible with this unit. 1. Locate battery and battery door which are packaged together inside a plastic bag and are separate from the handset. . Locate the battery compartment on the back of the handset. 3. Plu
Resumen del contenido incluido en la página 12
Base Station 1. Choose an area near an electrical outlet and a telephone wall jack (RJ11C), and place your cordless telephone on a level surface, such as a desktop or tabletop, or you may mount it on the wall. . Plug one end of the telephone line cord into the TEL LINE jack on the bottom of the base and the other end into a modular jack. 3. Plug the AC power converter into the electrical outlet and the DC connector into the jack on the bottom of the base. 4. Place the handset in the bas
Resumen del contenido incluido en la página 13
Answering System Setup This section shows you how to set up your answering system to receive incoming calls. Before you begin the set up process, you must turn on the answering system. • Press the ANS ON/OFF button to turn the answering system on and off. The MESSAGES indicator lights when the answering system is on. The indicator blinks when you have new messages. NOTE: The answering system displays “- -” when it is off. Setting the Voice Prompt Language The default voice prompt language is
Resumen del contenido incluido en la página 14
NOTE: You must set the day manually. You may choose to set the time manually as well, although the time is automatically transmitted by your local phone company as part of Caller ID service. If you subscribe to Caller ID service, the current time is set automatically when you receive your first CID record. Speaker Volume Use the VOLUME (5 or 6) buttons to adjust speaker volume on the base to a comfortable level. L1 is the minimum speaker volume and L8 is the maximum. Recording the Outgoing
Resumen del contenido incluido en la página 15
) Sample Multi-Mailbox Outgoing Announcement Hi, this is (use your name here), We can’t answer the phone right now, so please press 1 to direct your message to (name 1), press 2 to direct your message to (name 2), press 3 to direct your message to (name 3). Leave your name, number and a brief message after the tone, and we’ll get back to you soon. Thanks. Reviewing and Choosing the Announcement Press and release the ANNOUNCE 1 button to review and select this one as your outgoing announceme
Resumen del contenido incluido en la página 16
CALL RECORDS Review Caller ID data; select and dial from the Caller ID data or from the Redial list which contains the last 3 phone numbers dialed. SOUND SETTING Record ringer tone from microphone, headset or any audio player; select main ringer tone or set key tone. PHONE SETTING Set display language, set area code, register the handset to the base unit, name the handset or reset to default setting. DISPLAY SETTING Choose a preset and downloaded images to be wallpaper of the idle display
Resumen del contenido incluido en la página 17
Area Code If you enter your local 3-digit area code in the area code menu, your local area code does not display on the Caller ID (CID) list. Instead, you only see the local 7-digit number. Calls received from outside your local area code will display the full 10-digits. From the PHONE SETTING menu; 1. Use the 6 or 5 button to scroll to SET AREA CODE. . Press the SELECT button to enter the menu. — — — 3. Use the number keys to enter your 3 digit area code. “ - - - “ is the d
Resumen del contenido incluido en la página 18
Handset Name This menu allows you to enter a name for the handset, which displays on the idle screen. From the PHONE SETTING menu; 1. Use the 6 or 5 button to scroll to HANDSET NAME. . Press the SELECT button to enter the menu. DANIEL 3. Use the number keys to enter a name (up to 15 characters). More than one letter is stored in each of the number keys. H HANDSET NAM ANDSET NAME E For example, to enter Bill Smith, press the key twice for the letter B. Press the 4 key 3 times for the le
Resumen del contenido incluido en la página 19
NO 4. Select NO, if you do not want to deregister. YES 5. If you select YES, press the SELECT button to confirm. CONFIRM? MOVE NEAR TO BASE displays for seconds, then NO YES CONFIRM? shows on the display. D DEREGISTRA EREGISTRATI TION ON 6. Use the 6 or 5 button to scroll to NO or YES. The default is YES. 7. If you select YES, press the SELECT button to confirm. DE-REGISTER . . . shows on the display followed by a confirmation tone. Then, HANDSET X DEREGISTERED shows on the di
Resumen del contenido incluido en la página 20
Default Setting This option allows you to return the handset to factory preset settings. From the PHONE SETTING menu; NO 1. Use the 6 or 5 button to scroll to DEFAULT SETTING. YES . Press the SELECT button to enter the menu. 3. Use the 6 or 5 button to scroll to NO or YES. The default is NO. D DEF EFA AUL ULT T SETTING SETTING 4. If you select YES, all the settings in the programmable menu are returned to factory default setting. You will hear a confirmation tone. Display Setting The
