Resumen del contenido incluido en la página 1
1480_book_1ATT 2/25 2/25/02 10:30 AM Page ii
USER’S MANUAL
Part 2
DRAFT
2/25/02
2.4 GHz Corded Cordless Telephone
with Caller ID/Call Waiting 1480
Please also read
Part 1 — Important
Product Information
AT&T and the globe symbol are registered trademarks of AT&T Corp. licensed to Advanced American Telephones.
Resumen del contenido incluido en la página 2
1480_book_1ATT 2/25 2/25/02 10:30 AM Page iii © 2002 Advanced American Telephones. All rights reserved. Printed in China. Issue 1AT&T 03/02
Resumen del contenido incluido en la página 3
1480_book_1ATT 2/25 2/25/02 10:30 AM Page v CONTENTS BEFORE YOU BEGIN . . . . . . . . . . .1 CALLER ID OPERATION . . . . . . . .17 About the Base and the Charger . . . .1 About Call History . . . . . . . . . . . . .17 Choosing the Best Location . . . . . . .1 Review Call History . . . . . . . . . . . .17 About Caller ID with Call Waiting . . .1 Delete Records from About Call History . . . . . . . . . . . . . .2 Call History . . . . . . . . . . . . . . . .18 Dial a Displayed Number . . . . .
Resumen del contenido incluido en la página 4
1480_book_1ATT 2/25 2/25/02 10:30 AM Page 1 BEFORE YOU BEGIN About the Base and the Charger This product provides you with a base station with corded handset, a cordless handset, and a handset charger. You’ll need to connect the base to both AC power and a modular telephone jack. You’ll connect the handset charger to AC power only. For more information, please see INSTALLATION in this User’s Manual. Choosing the Best Location Choose a location for the base near an electrical outlet and a tel
Resumen del contenido incluido en la página 5
1480_book_1ATT 2/25 2/25/02 10:30 AM Page 2 BEFORE YOU BEGIN About Call History This phone assigns each incoming call a number from 1 to 90. The most recent call will have the lowest number. When the memory is full, the oldest call information is deleted to make room for new incoming call information. If you answer a call before information appears on the screen, it may not be in the call history. Call history information is stored independently at the base and at each handset. If you make c
Resumen del contenido incluido en la página 6
1480_book_1ATT 2/25 2/25/02 10:30 AM Page 3 INSTALLATION Base Installation Table/Desk 1 Connect the corded handset to the base Standard Modular electrical outlet telephone jack 2 Connect the telephone line cord. 3 Connect the power cord. The ANSWER ON/OFF light goes on, and CL flashes in the Message Window. Use only the power cord 4 Check for dial tone. supplied with this product. Lift the handset; you should hear a dial If you need a replacement, tone. call 1 800 222–3111. 3
Resumen del contenido incluido en la página 7
1480_book_1ATT 2/25 2/25/02 10:30 AM Page 4 INSTALLATION Wall Mount 1 Remove the adapter from under the base as shown. 2 Reverse handset tab. 3 Connect the telephone line cord to the jack labeled TEL LINE on the back of the base. 4 Connect the power cord to the jack labeled DC IN on the back of the base. 4
Resumen del contenido incluido en la página 8
1480_book_1ATT 2/25 2/25/02 10:30 AM Page 5 INSTALLATION 5 Wrap the telephone line cord around the posts on the bottom of the base. 6 Replace the adapter on the base so the larger end is toward the bottom as shown. 5
Resumen del contenido incluido en la página 9
1480_book_1ATT 2/25 2/25/02 10:30 AM Page 6 INSTALLATION 7 Connect the corded handset to the base. 8 Connect the telephone line cord to the modular telephone jack. 9 Plug the power cord into the electrical outlet. The ANSWER ON/OFF light goes on, and CL flashes in the Message Window. Use only the power cord supplied with this product. If you need a replacement, call 1 800 222–3111. 10 Mount the base on the wall. a) Align holes on base with mounting studs on wall jack. b) Pull base down on mo
Resumen del contenido incluido en la página 10
1480_book_1ATT 2/25 2/25/02 10:30 AM Page 7 INSTALLATION Handset Charger Installation 1 Connect the power cord. Feed the power cord through the strain-relief channel on the bottom of the handset CHARGING charger. Then plug the cord into an Light: on when electrical outlet not controlled by a handset is in wall switch. charging stand 2 Install the handset battery. Use only AT&T Replacement Battery 3301, SKU# 91076. a) Remove battery compartment cover by pressing on the indentation and slidi
Resumen del contenido incluido en la página 11
1480_book_1ATT 2/25 2/25/02 10:30 AM Page 8 INSTALLATION 3 Charge the handset battery. • Place the handset in the remote charging stand. The CHARGING light goes on. • Charge the battery at least 12 hours. 4 Check for dial tone. • After the batteries are charged, lift the handset and press P; you should hear a dial tone. 5 Set the time and date displayed on handset screen. If you subscribe to Caller ID service, the date and time will be set automatically with the first incoming call. If you d
Resumen del contenido incluido en la página 12
1480_book_1ATT 2/25 2/25/02 10:30 AM Page 9 INSTALLATION Belt Clip Attach belt clip to the cordless handset (optional). To attach To remove Headset You can use this telephone with any industry standard 2.5 mm headset (purchased separately). For best results, use an AT&T 2.5 mm headset. Plug the headset into the jack located on the left side of the handset (under the small rubber flap) or into the jack on the right side of the base Do not force the connection, but make sure the plug fi
Resumen del contenido incluido en la página 13
1480_book_1ATT 2/25 2/25/02 10:30 AM Page 10 TELEPHONE OPERATION AT THE BASE Display Dial Base Ringer Volume Switch Press to dial the Use to adjust how loudly the base rings. number currently displayed on screen. Hold Press H to put a call on hold. The IN USE light flashes. To return to the call, press K. NOTE: When Hold is active, pressing P on handset will also return you to the call. Speaker Volume While on a call, use to adjust the volume of what you hear. Make, Answer, or End a Call P
Resumen del contenido incluido en la página 14
1480_book_1ATT 2/25 2/25/02 10:30 AM Page 11 TELEPHONE OPERATION AT THE HANDSET Answer a Call Press any key exceptO. Make a Call Press P, then dial the number — OR — Dial the number (use < to Handset Volume backspace and While on a call, correct digits), then adjust volume press P to call. of what you hear. Flash/ End a Call Call Waiting Press O Access special — OR — telephone company Place handset in subscriber services. handset charger. Hold Exit Press to put a call programming. on hol
Resumen del contenido incluido en la página 15
1480_book_1ATT 2/25 2/25/02 10:30 AM Page 12 TELEPHONE OPERATION AT THE HANDSET Handset Ringer Style/Battery Save You can select from four different handset ringer styles, or turn the ringer off and extend the battery life. 1 Make sure the handset is off. 2 Press G to enter programming mode. 3 Press > until the screen displays RINGER:. 4 Press S. The screen displays the current setting. 5 Press < or > to select 1, 2, 3, 4,or OFF. You will hear a sample of each ring. 6 Press S to choose the
Resumen del contenido incluido en la página 16
1480_book_1ATT 2/25 2/25/02 10:30 AM Page 13 TELEPHONE OPERATION AT THE HANDSET Operating Range This cordless telephone operates within the maximum power allowed by the Federal Communications Commission (FCC). Even so, this handset and base can communicate over only a certain distance — which can vary with the locations of the base and handset, the weather, and the construction of your home or office. For best performance, keep the base antenna fully upright. If you receive a call while you a
Resumen del contenido incluido en la página 17
1480_book_1ATT 2/25 2/25/02 10:30 AM Page 14 TELEPHONE DIRECTORY AT THE BASE OR HANDSET The base and cordless handset can each store 50 telephone numbers with names, each up to 24 digits long. Directory information is stored independently at the base and cordless handset. Changes made to entries at one location do not affect the other directory. Entries are stored alphabetically. For consistency with Caller ID entries, you may wish to enter last names first. Note: Press O at any time to exit
Resumen del contenido incluido en la página 18
1480_book_1ATT 2/25 2/25/02 10:30 AM Page 15 TELEPHONE DIRECTORY AT THE BASE OR HANDSET 4 When you finish entering the name, press S. The screen displays ENTER NUMBER. 5 Enter the telephone number. Use < to backspace and make a correction. Press r to store a pause in the dialing sequence. —OR— Press r to display the last number dialed from this phone. 6 Press S. If you are using the base, you are now done. If you are using the handset, the screen displays DISTINCT RING? and the current sett
Resumen del contenido incluido en la página 19
1480_book_1ATT 2/25 2/25/02 10:30 AM Page 16 TELEPHONE DIRECTORY AT THE BASE OR HANDSET Delete a Number/Name Stored in the Directory 1 Press > (DIR). The screen displays DIRECTORY. 2 Press < or > to scroll alphabetically through entries stored in memory —OR— Press the dial pad key for the first letter of the entry you want to delete. 3 When the screen displays the number you want to delete, press S. Then press < or > until ERASE flashes. EDIT DIAL EERRAASSEE 973-555-0123 4 Press S. The scre
Resumen del contenido incluido en la página 20
1480_book_1ATT 2/25 2/25/02 10:30 AM Page 17 CALLER ID OPERATION Caller’s name Caller’s name Caller’s Caller’s telephone telephone number number Date of call Date of call T Time of call ime of call Position of call Position of call in call history in call history About Call History This phone assigns each incoming call a number from 1 to 90. The most recent call will have the highest number. When the memory is full, the oldest call information is deleted to make room for new incoming call in
