Resumen del contenido incluido en la página 1
111 K - W/D/G
Electric hob
Table de cuisson électrique
Operating Instructions
Notice d’utilisation
AUS ERFAHRUNG GUT
Resumen del contenido incluido en la página 2
ENGLISH Important Safety Information You MUST read these warnings carefully before installing or using the hob. If you need assistance, contact our Customer Care Department on 01635 572700 Installation l This hob must be installed by qualified personnel, according to the manufacturer’s instructions and to the relevant British Standards. l Remove all packaging before using the hob. l Ensure that the electrical supply complies with the type stated on the rating plate. l Do not attempt to modify th
Resumen del contenido incluido en la página 3
l Do not use this hob if it is in contact with water. Do not operate the hob with wet hands. l Ensure the control knobs are in the ‘OFF’ position when not in use. l When using other electrical appliances, ensure the cable does not come into contact with the hot surfaces of the cooking appliance. l Unstable or misshapen pans should not be used on the hob as unstable pans can cause an accident by tipping or spillage. l Never leave the hob unattended when cooking with oil and fats. l Never use plas
Resumen del contenido incluido en la página 4
Contents Important Safety Information .................................................................... 2 Instructions for the User.............................................................................. 6 Description of the Hob...........................................................................................6 Operation ....................................................................................................................7 Maintenance and Cleaning .................
Resumen del contenido incluido en la página 5
Guide to Use the instructions The following symbols will be found in the text to guide you throughout the Instructions: Safety Instructions Step by step instructions for an operation + Hints and Tips i This appliance is manufactured according to the following EEC directives: 73/23 EEC - 90/683 EEC - 93/68 EEC - 89/336 EEC - 90/396 EEC, current edition. 5
Resumen del contenido incluido en la página 6
Description of the Hob Back Left Hotplate Back Right Front Left Hotplate Hotplate Back Left Hotplate Control Knob Front Right Back Right Hotplate Hotplate Control Knob Operating Pilot Front Right Hotplate Lamp Control Knob Front Left Hotplate Control Knob INSTALLATION The hob must be installed according to the instructions supplied. The hob must be installed by qualified personnel to the relevant British Standards. Please, ensure that, once the hob is installed, it is easily accessible for the e
Resumen del contenido incluido en la página 7
Operation ELECTRIC HOTPLATES To switch on a hotplate, turn the relevant control knob anticlockwise to the required heat setting. The control knob is numbered 1 - 3 0 - OFF 1 - Minimum 3 - Maximum. The hob has four rapid hotplates. The rapid hotplates are indicated by i a red dot, and will heat up more quickly than a normal plate. As the red dots are painted on the plate, they may deteriorate during use and even disappear completely after a period of time. This will not affect the performan
Resumen del contenido incluido en la página 8
Hints and Tips i Saucepans for use on solid plates should have several characteristics: l They should be fairly heavy duty l They should fit the heat area exactly, or be slightly larger for efficient use, NEVER smaller. l They should have a flat base to ensure good contact with the plate. This is particularly important when using pans for high temperature frying or pressure cooking. As soon as liquid starts boiling, turn down the plate control knob so that it will barely keep the liquid simmerin
Resumen del contenido incluido en la página 9
Maintenance and Cleaning Before any maintenance or cleaning can be carried out, you must DISCONNECT the hob from the electricity supply. The hob is best cleaned whilst it is still warm, as spillage can be removed more easily than if it is left to cool. The Hob Top Regularly wipe over the hob top using a soft cloth well wrung out in warm water to which a little wasing up liquid has been added. Avoid the use of the following: - household detergent and bleaches; - impregnated pads unsuitable for no
Resumen del contenido incluido en la página 10
Something Not Working? If the hob is not working correctly, please carry out the following checks before contacting your local AEG Service Force Centre. SYMPTOM SOLUTION n The plate does not heat up. u Check that the unit is plugged in and the electrical supply is switched on u Check that the RCCB has not tripped (if fitted) u Check the mains fuse has not blown u Check the correct control knob has been turned. n The plate is not giving u Check the plate is clean and dry satisfactory results
Resumen del contenido incluido en la página 11
Service and Spare Parts If you require spare parts or an engineer contact your local Service Force Centre by telephoning: 0870 5 929 929 Your call will be routed to your local Service Force Centre. When you contact the Service Centre, they will need the following information: 1. Your name, address and post code. 2. Your telephone number 3. Clear and concise details of the fault 4. The model and the serial number (see rating label on the back of this instruction booklet) 5. Date of purchase C
Resumen del contenido incluido en la página 12
Guarantee Conditions AEG offer the following guarantee to the first purchaser of this appliance. 1. The guarantee is valid for 12 months commencing when the appliance is handled over to the first retail purchaser, which must be verified by purchase invoice or similar documentation. The guarantee does not cover commercial use. 2. The guarantee covers all parts or components which fail due to faulty workmanship or faulty materials. The guarantee does not cover appliances where defects or poor perf
Resumen del contenido incluido en la página 13
Instructions for the Installer Engineer technical data OVERALL DIMENSIONS Width: 580 mm. Depth: 500 mm. Height: 88 mm. Weight: 11 Kg. CUT OUT DIMENSIONS Width: 550 mm. Depth: 470 mm. Thickness: 30 mm. SUPPLY CONNECTIONS Electric: 230-240V 50Hz supply. HEATING ELEMENTS RATING Rapid Front Left Hotplate Ø 180 mm. 2090 W Rapid Back Left Hotplate Ø 145 mm. 1570 W Rapid Back Right Hotplate Ø 180 mm. 2090 W Rapid Front Right Hotplate Ø 145 mm. 1570 W Total Rating 7320 W 13
Resumen del contenido incluido en la página 14
50 mm 100 mm 50 mm 100 mm 50 mm 50 mm 600 mm Important safety requirements This hob must be installed in accordance with the IEE Wiring Regulations (Current Edition). Detailed recommendations are contained in the following British Standards Codes Of Practice: B.S. 6172/ B.S. 5440, Par. 2 and B.S. 6891 Current Editions. Location This hob has been registered as a "Class Y" appliance according to Fire Risk Regulations. Minimum distances detailed below must be observed. The hob may be located in a k
Resumen del contenido incluido en la página 15
580 550 Installation IMPORTANT This hob must be installed by qualified personnel to the relevant British Standards. The manufacturer will not accept liability, should the above instructions or any of the other safety instructions incorporated in this book be ignored. Cut Out Size The dimensions of the cut-out are given in the diagram. FO 2109 15 500 470 55 min.
Resumen del contenido incluido en la página 16
Building over a cupboard or drawer If the hob is to be installed above a cupboard or drawer it will be necessary to fit a heat resistant board below the base of the hob on the underside of the work surface. It is also recommended to carry out the electrical connection to the hob as shown in diagrams 1 and 2. ON/OFF SWITCH ON/OFF SWITCH 1 2 FLEX OUTLET FLEX OUTLET FO 0764 FO 0763 Building over a kitchen unit with door Proper arrangements must be 3 taken in designing the furniture unit, in order t
Resumen del contenido incluido en la página 17
Fitting the hob to the worktop Before fitting the hob into the cut out, a sealing gasket supplied with the hob must be fitted to the edge of the cut out. It is essential that no gaps are left in this seal in order to prevent spillage near the hob seeping into the cabinet below. Seal 1) Place the sealing a gasket all around the + edge of the cut out. 2) Place the hob into the cut out and secure it by means of FO 0199 the relevant fixing clamps and screws, as shown in the diagram. 3) Remove the ex
Resumen del contenido incluido en la página 18
Electrical connections Any electrical work required to install this hob should be carried out by a qualified electrician or competent person, in accordance with the current regulations. THIS HOB MUST BE EARTHED. The manufacturer declines any liability should these safety measures not be observed. This hob is designed to be connected to a 230-240V 50Hz AC electrical supply. Before switching on, make sure the electricity supply voltage is the same as that indicated on the hob rating plate. The rat
Resumen del contenido incluido en la página 19
Permanent Connection In the case of a permanent connection, it is necessary that you install a double pole switch between the hob and the electricity supply (mains), with a minimum gap of 3 mm. between the switch contacts and of a type suitable for the required load in compliance with the current electric regulations. The switch must not break the yellow and green earth cable at any point. Ensure that the hob supply cord does not come into contact with surfaces with temperatures higher than 50 d
Resumen del contenido incluido en la página 20
Wiring diagram 1 L 3 L 4 N Ø 180 Ø 180 R Ø 145 R Ø 145 43 2 1 43 2 1 43 2 1 43 2 1 1 2 3 4 P P P P 2 4 2 4 2 4 2 4 3 3 3 3 P P P P 1 1 1 1 1 1 1 1 2 2 2 2 P P P P 3 3 3 3 5 5 5 5 PLATE 20
