Bedienungsanleitung Miele CS 1326 Y

Inhaltszusammenfassung zur Seite Nr. 1

Product and Cut-out Dimensions Page 1 of 4
CS CS 1326 1326 Y Y Te Tepan pan Ya Yak kii CombiSet CombiSet
Location Codes
1 – Spring clips
2 – Appliance front
3 – Installation height
4 4 – Power Power s supp upply ly box box with with conn connection ection cable cable, Leng Lengtth h = 47 47 ¼ ¼” (1200 (1200 mm) mm)
208 V, 60 Hz, 20 A fuse rating
240 V, 60 Hz, 15 A fuse rating
Ensure that the power outlet is accessible after installation
5 – Rating label – Ensure that the electrical supply match

Inhaltszusammenfassung zur Seite Nr. 2

Product and Cut-out Dimensions Page 2 of 4 CS CS 1326 1326 Y Y Te Tepan pan Ya Yak kii CombiSet CombiSet Cut-out Dimensions Cut-out Dimensions For three CombiSet Appliances For two CombiSet Appliances For the installation of three appliances the For the installation of two appliances the width of the countertop cut-out D is the sum width of the countertop cut-out D is the sum of A and B and C. of A and C. A, B and C = appliance width If more than three appliances a

Inhaltszusammenfassung zur Seite Nr. 3

Product and Cut-out Dimensions Page 3 of 4 CS CS 1326 1326 Y Y Te Tepan pan Ya Yak kii CombiSet CombiSet The illustration above represents the attachment of spring clips 1 and support bars 2 for 3 appliances An additional support bar is required for each additional appliance. The position for the attachment of an additional support bar depends on the width of appliance B. Spring Clip installation Spring Clip installation on wood or solid on a granite surface countertop countertop Place the s

Inhaltszusammenfassung zur Seite Nr. 4

Product and Cut-out Dimensions Page 4 of 4 CS CS 1326 1326 Y Y Te Tepan pan Ya Yak kii CombiSet CombiSet Safety distances to back wall 1 – Wall frame 2 – Wall covering x = thickness of the wall covering 3 – Countertop 4 – Countertop p cut-out 5 – Minimum safety distance with flammable materials 2" (50 mm) with non-flammable materials 2" (50 mm) minus x If a wall covering is installed, a minimum safety distance must be maintained between the countertop cut-out and the covering, since high tempe