Inhaltszusammenfassung zur Seite Nr. 1
Operating and Installation
Instructions
Induction Wok
CS 1223
To prevent accidents and en-CA
machine damage,
read the Operating Manual
before
installation or use. M.-Nr. 07 353 930
Inhaltszusammenfassung zur Seite Nr. 2
Contents IMPORTANT SAFETY INSTRUCTIONS.................................3 Description of the unit..............................................8 Before using for the first time........................................9 Induction........................................................10 How it works......................................................10 Noises ..........................................................11 Cookware........................................................11 Use .......
Inhaltszusammenfassung zur Seite Nr. 3
IMPORTANT SAFETY INSTRUCTIONS Correct usage WARNING- When using your Only use the combiset for residential ~ appliance follow basic cooking, and for the purposes precautions, including the described in this manual. following: Other uses are not permitted and can be dangerous. The manufacturer will Read all instructions before not be held liable for damage caused installation or use to prevent by unauthorized use or improper injury and appliance damage. operation of any kind. This appliance confo
Inhaltszusammenfassung zur Seite Nr. 4
IMPORTANT SAFETY INSTRUCTIONS Children Technical Safety Activate the Child Safety Lock so Installation, repair and maintenance ~ ~ that the combiset cannot be turned on work should be performed by a Miele inadvertently. authorized service technician. Work by unqualified persons could be Children should not be left ~ dangerous and may void the warranty. unattended in an area where the appliance is in use. Never allow Before installing the combiset, ~ children to sit or stand on any part of check
Inhaltszusammenfassung zur Seite Nr. 5
IMPORTANT SAFETY INSTRUCTIONS Install the appliance so that the Do not cook on a broken combiset. ~ ~ power cord does not come into contact Any breakages or cracks in the ceramic with any portion of the cooktop which surface of the appliance are defects may become hot during use. and must be treated as such. If the combiset should break, cleaning Before servicing, disconnect the ~ solutions and spills may penetrate the appliance from the main power supply. broken combiset and create a risk of Do
Inhaltszusammenfassung zur Seite Nr. 6
IMPORTANT SAFETY INSTRUCTIONS Safety Do not store items on the appliance ~ when not in use. Items could melt or Individuals with a pacemaker or ~ catch fire from residual heat or if the similar medical device: appliance is turned on inadvertently. Please note that an electromagnetic Always switch the cooking zone(s) off field develops when the combiset is after use. turned on. It is not likely that this will affect the pacemaker or similar device. Flammable materials should not be ~ If in doubt
Inhaltszusammenfassung zur Seite Nr. 7
IMPORTANT SAFETY INSTRUCTIONS Make certain that the power cords of Do not use a steam cleaner to clean ~ ~ small appliances do not come in this appliance. Steam could penetrate contact with the appliance. The electrical components and cause a insulation of the cable could become short circuit. damaged. Danger of electric shock! Do not allow solid or liquid sugar, ~ Be careful not to drop anything on pieces of plastic or foil to fall on the ~ the ceramic surface of the combiset. burners when they
Inhaltszusammenfassung zur Seite Nr. 8
Description of the unit 3 a Wok burner C11 / " (30 cm) 4 e Display Rating in watts: 2400 W with Booster: 3200 W ß No wok on burner b Wok pan (included) A Auto-heat c Control knob F Fault (see "Frequently asked questions") d Indicators C / 0 Safety cut-out feature Indicators (see "Safety features") I Booster "On" H Overheating protection (see "Safety features") f On/Off indicator L Child safety lock g Booster indicator (see "Safety features") h "Residual Heat" indicator 8
Inhaltszusammenfassung zur Seite Nr. 9
Before using for the first time Clean the combiset Heat the appliance ^ Before using for the first time, clean When the combiset is first connected to the appliance with a damp cloth and the power supply, and after a power dry with a soft cloth. failure, all indicators in the display will light up for approx. 1 second. The combiset can be used as normal once the indicators go out. Do not use liquid dish soap to clean the combiset, this may cause permanent blue discolorations. Metal components of
Inhaltszusammenfassung zur Seite Nr. 10
Induction How it works Be careful not to place cutlery or An induction coil is located under the other metal objects on the combiset. burner. When the burner is switched When the appliance is switched on, on, this coil creates a magnetic field or when there is residual heat which impacts directly on the base of present, there is the risk of metal the pan and heats it up. The burner objects heating up quickly. itself is heated indirectly by the heat Beware of burns. given off by the pan. Dependin
Inhaltszusammenfassung zur Seite Nr. 11
Induction Noises Cookware The following noises can occur when Only the wok pan supplied should be the induction wok is in use. used with this appliance. The wok pan is designed specifically for this – Higher power settings may cause a induction wok. buzz. This will decrease or cease altogether when the power setting is reduced. ,There is a danger of fat or food – You may hear a clicking sound from overheating and burning if other the electronic switches, especially on woks are used. lower settin
Inhaltszusammenfassung zur Seite Nr. 12
Use Turning the combiset On/Off Residual heat indicator The residual heat indicator will go out ,Do not leave the appliance once the combiset has cooled to a safe unattended while in use. temperature. As long as the residual heat To turn the combiset on turn the control indicator is lit do not touch or place knob clockwise a to the desired power any heat sensitive items on the level. burner. Danger of burns, and fire hazard. To turn the combiset off turn the control knob counterclockwise b to "0
Inhaltszusammenfassung zur Seite Nr. 13
Use Settings When Auto-heat has been activated, the burner switches on automatically at Use for Power the highest setting and then switches to level the continued power level which was selected. The "heat-up" time depends Keeping food warm, 1-2 on which continued power level has Melting chocolate, etc. been chosen (see table). Warming food 3 - 6 Taking the wok off the burner while Stir-frying 7- 9 Auto-heat is in operation interrupts the function. It will resume if the wok is placed back on the
Inhaltszusammenfassung zur Seite Nr. 14
Use Booster function Activating the booster function The induction wok is equipped with a ^ Turn the control knob past power booster function to temporarily increase level 9 to BI, then back to 9. the power level. When the Booster is I appears in the display and the B activated the burner will operate at indicator lights up. power level 9 with an extra boost of power for 10 minutes. After 10 minutes the burner will automatically switch back to power Taking the wok pan off the burner while level
Inhaltszusammenfassung zur Seite Nr. 15
Safety features Child Safety Lock Safety cut-out The combiset has a safety cut-out Keep children away from the feature in case it is not turned off after combiset for their own safety. use. The combiset has a Child Safety Lock If the burner is heated for an unusually to prevent children from turning on the long period of time (see table), and the burners. power level settings are not adjusted, the combiset will turn itself off To activate the Child Safety Lock: automatically and the residual hea
Inhaltszusammenfassung zur Seite Nr. 16
Safety features Overheating protection Overheating can be caused by: The induction coils are fitted with an – using the appliance for too long at overheating protection feature. This the maximum power level. prevents the induction coils from – there being insufficient ventilation to overheating by: the appliance. – If the booster function is being used, If a drawer is installed directly under it will be switched off. the combiset, sufficient space must be – If the temperature continues to rise k
Inhaltszusammenfassung zur Seite Nr. 17
Cleaning and care Do not use a steam cleaner to clean Clean any spills immediately before this appliance. Steam could they become difficult to remove. penetrate electrical components and cause a short circuit. Pressurized Clean the appliance regularly, steam could cause permanent preferably after each use. Allow the damage to the surface and to appliance to cool before cleaning. components for which the manufacturer cannot accept Ceramic surfaces responsibility. ^ Wipe off any soiling using a da
Inhaltszusammenfassung zur Seite Nr. 18
Cleaning and care Stainless steel Clean stainless steel surfaces with warm water and liquid dish soap applied with a non-abrasive sponge and then wipe dry with a soft cloth. Soak baked or hardened spills first to loosen them. Stainless steel surfaces can be cleaned using a non-abrasive stainless steel cleaner (available from Miele). To help prevent resoiling, a conditioner for stainless steel can also be used. Apply sparingly with even pressure. Do not use stainless steel cleaner on or around th
Inhaltszusammenfassung zur Seite Nr. 19
Frequently asked questions ,Repairs should only be carried out by an authorized technician in accordance with local and national safety regulations. Unauthorized repairs could cause injury or appliance damage. The manufacturer cannot be held responsible for unauthorized work. What if the appliance does not heat up after it is turned on? Possible fault Solution The Child safety lock is activated. See "Child safety lock". The Overheating protection feature has See "Overheating protection". activat
Inhaltszusammenfassung zur Seite Nr. 20
Frequently asked questions What if the combiset turns itself off automatically? Possible fault Solution Either the "Safety cut-out" feature or the See "Overheating protection" or "Safety "Overheating protection" feature has cut-out". been activated. What if one of the following errors occurs: - The booster function turns off automatically ahead of time. - C and 0 flash alternately in the display. Possible fault Solution The overheating protection feature has See "Overheating protection". been ac
