Inhaltszusammenfassung zur Seite Nr. 1
Dynamic Cooking Systems, Inc.
PROFESSIONAL 5 BURNER
36" DROP-IN COOKTOP
Use and Care Guide
Models:
■ CT-365SS
■
CT-365BK
■ CT-365WT
■
CT-365GN
■ CT-365BL
Inhaltszusammenfassung zur Seite Nr. 2
A Message To Our Customers Thank you for selecting this DCS Professional Drop-In Cooktop. Because of this appliance’s unique features we have developed this Use and Care Guide. It contains valuable information on how to properly operate and maintain your new appliance for years of safe and enjoyable cooking. To help serve you better, please fill out and return the Ownership Registration Card and keep this Guide handy, as it will help answer questions that may arise as you use your new cooktop. F
Inhaltszusammenfassung zur Seite Nr. 3
Table of Content s SAFETY PRACTICES AND PRECAUTIONS ...................................................................3-5 COOKTOP USE Control Knobs.................................................................................................................................6 Cooking Utensils .............................................................................................................................6 Burners .....................................................................
Inhaltszusammenfassung zur Seite Nr. 4
Safety Practices & Precautions When properly cared for, your new DCS Appliance has been designed to be a safe, reliable cooking appliance.When using this restaurant caliber appliance, use it with extreme care, as this type appliance provides intense heat and can increase the accident potential. Basic safety precautions must be followed when using kitchen appliances, including the following: • Read this Use and Care Manual thoroughly before using your new appliance.This will help to reduce the r
Inhaltszusammenfassung zur Seite Nr. 5
Safety Practices & Precautions •For personal safety, wear proper apparel. Loose fitting garments or hanging sleeves should never be worn while using this appliance. Some synthetic fabrics are highly flammable and should not be worn while cooking. • Do not use aluminum foil to line any part of the cooktop. Using a foil liner could result in a fire hazard. WARNING: This appliance is for cooking. Based on safety considerations, never use the cooktop to warm or heat a room. •When using the cooktop
Inhaltszusammenfassung zur Seite Nr. 6
Safety Practices & Precautions •Clean the ventilator hood and filters above the cooktop frequently so grease from cooking vapor does not accumulate. •Turn the ventilator OFF in case of fire or when intentionally “flaming” liquor or other spirits on the cooktop.The blower, if in operation, could unsafely spread the flames. •Do not obstruct the flow of combustion or ventilation air to the appliance. Be sure a fresh air supply is available. •For safety reasons and to avoid damage to the appliance n
Inhaltszusammenfassung zur Seite Nr. 7
Cooktop Use CAUTION: For warranty coverage, DCS requires that burner adjustments be made by a qualified technician at the time of installation. Extreme care should be used when adjustments are made after installation. Improper or lack of adjustments will void your warranty. CONTROL KNOBS: The control knobs and knob bezels are readily associated with the burners they control and are located on the right hand side of the Cooktop.The sealed top burners have an infinite number of heat settings and t
Inhaltszusammenfassung zur Seite Nr. 8
Cooktop Use Cap BURNERS: Your new Drop-In Cooktop is equipped with burners typical Brass Port Ring Locating of those used in restaurants.These restaurant style burners Brass Pin are comprised of high strength die cast aluminum burner Port Ring bases and simmer port rings,precision forged brass port rings, and aluminum burner caps. Hex Nut Your cooktop is equipped with 4 burners rated at 11,000 Simmer Locating Notch Ring Btu/hr, and one HI-output burner rated at 17,500 Btu/hr. Locating Pin Your
Inhaltszusammenfassung zur Seite Nr. 9
Cooktop Use BURNER EFFICIENCY: It is necessary to keep the burner ports and the igniters clean for proper lighting and efficient performance of the cooktop burners.The burner flame should burn completely around the burner with no excessive noise or lifting.The flame should be blue in color and stable with no yellow tips. FLAME HEIGHT: The correct height of the flame mainly depends on the size of the bottom of the cooking utensil, the material of the cooking utensil, the amount and type of food
Inhaltszusammenfassung zur Seite Nr. 10
Care and Maintenance CLEANING THE COOKTOP Be careful cleaning any part of this appliance while hot. All parts of the appliance can be cleaned with hot soapy water, rinsed, dried and buffed to a shine with a soft, heavy pile cloth.Always try this first, as it is the mildest cleaning procedure. 1. Use the mildest cleansers first. Some brands of cleaners are harsher then others and may cause metal parts to discolor or corrode, read their directions. Be sure all the cooktop controls are turned OFF a
Inhaltszusammenfassung zur Seite Nr. 11
Care and Maintenance CLEANING THE BURNERS: For proper lighting and performance keep the burners clean. It is necessary to clean the burners if they do not light although the igniter clicks, whenever there has been a severe boil over or when the flame doesn’t burn blue. Be certain all burner knobs are in the OFF position before attempting to clean the burners.The burners Cap have been designed for ease of cleaning.When the grates and burners are cool, remove the grate.The Burner Cap and the Brass
Inhaltszusammenfassung zur Seite Nr. 12
Proper Ventilation Requi rement s IMPORTANT INFORMATION: CAUTION: Ventilation hoods and blowers are designed for use with single wall ducting. However, some local building codes or inspectors may require double wall ducting. Consult local building codes and/or local agencies, before starting, to ensure that hood and duct installation will meet local requirements. Hood blower speeds should be variable to reduce noise and loss of heated or air conditioned household air when maximum ventilation is
Inhaltszusammenfassung zur Seite Nr. 13
Installation Inst ruction s PREPARING FOR THE INSTALLATION: Be sure to read page 11 for the proper ventilation requirements before you begin. When making your CUTOUT refer to page 13 on cabinet preparation. Step 1: Unpack the unit, the regulator, and remove all packing between all the burners, rings, and caps. Remove the grates from their boxes. Step 2: With the necessary tools and hardware ready, measure the distance from the back and sides of the countertop and cabinet to locate the position o
Inhaltszusammenfassung zur Seite Nr. 14
Installation Inst ruction s CABINET PREPARATION The Drop-In Cooktop was designed for easy installation. However, for the best appearance, to conceal the raw cutout edges and to ensure a snug and secure fit, the cutouts must be precise. Use the cutout dimension information in the figures below for your installation.When preparing for installation, it is critical that the cabinet cutout matches the cutout dimensions provided for the cooktop for a good fit. See illustrations below for specification
Inhaltszusammenfassung zur Seite Nr. 15
Installation Inst ruction s GAS HOOK UP: Operating Gas: Set for NATURAL, adjustable for LPG by a qualified technition. Pressure Inches W.C.: 10.0”-LPG/4.0”-Natural Gas Verify the type of gas supplied to the location.The cooktop is shipped from the factory set up for Natural Gas and can be modified for LPG. A manual valve must be installed external to the appliance, in an accessible location from the front for the purpose of shutting off the gas supply. Make sure the gas supply is turned off at t
Inhaltszusammenfassung zur Seite Nr. 16
Installation Inst ruction s POWER REQUIREMENTS: 120 VAC, 60 Hz., single phase. CT-365: 0.10 Amp. Max. (Use 15 Amp. Circuit minimum) •Always disconnect the electric supply cord from the wall outlet or service disconnect before servicing this appliance. • Observe all governing codes and ordinances when grounding, in the absence of which, observe National Electrical Code ANSI/NFPA No. 70-1990. RECOMMENDED GROUNDING METHOD: This appliance is factory equipped with a power supply cord with a three-pro
Inhaltszusammenfassung zur Seite Nr. 17
Installer Final Checklist GENERAL OPERATION: ❏ Placement of Unit. ❏ All internal packing materials are removed, i.e. below grates, around knobs, etc. ❏ Specified clearance maintained to cabinet surfaces. ❏ Bezels centered on burner knobs and knobs turn freely. ❏ Unit Level- front to back, side to side. ❏ Each burner lights satisfactorily, both ❏ All packaging material and tie straps removed. individually and with other burners operating. ❏ Flame adjustment for 3/8" soft blue cone ELECTRICAL: mad
Inhaltszusammenfassung zur Seite Nr. 18
Product Measurement Specifications To be sure that the CUTOUT for the cooktop is correct in dimensions and to insure a clean installation REFER TO PAGE 12 for Cabinet Preparation and CUTOUT specifications. T op View 21" 36" Front View 34-1/2" Side View 5-1/2" 4" 19-1/2" 17
Inhaltszusammenfassung zur Seite Nr. 19
Wiring Diagram 18 G 120/230V TRANSFORMER N 5 POINT 120V 230V GAS RE-IGNITER MODULE ELECTRODES LF SW5 LF 5 POWER CORD 120 VAC IN LR SW4 LR 4 C SW3 C 3 RR SW2 RR 2 RF SW1 RF 1 VALVE INDICATOR SWITCHES LIGHTS
Inhaltszusammenfassung zur Seite Nr. 20
War ranty LENGTH OF WARRANTY One (1) Year Full parts and Labor covers the entire product Five (5) Years Limited switches and stainless steel main tops DCS WILL COVER: All repair labor and parts found to be defective due to materials or workmanship for one full year from date of purchase. Service must be provided by Authorized Factory Agent during normal working hours. DCS WILL NOT COVER: •Installation or start-up. •Normal adjustment to burners, gas regulators, etc. •Cleaning of igniters and/or g
