Bedienungsanleitung Canon MX420

Inhaltszusammenfassung zur Seite Nr. 1

Setting Up Your MX420 In
Default Mode (Tel Priority Mode)
Without An Answering Machine
Next

Inhaltszusammenfassung zur Seite Nr. 2

Connecting The Phone Lines Previous Next

Inhaltszusammenfassung zur Seite Nr. 3

Fax to Phone Line Connection Before Hand Set Wall Jack (Phone) (Existing Phone Cord) After Hand Set (Phone) Wall Jack (Existing Phone Cord) (Phone Cord included with Canon printer) Previous Next 3

Inhaltszusammenfassung zur Seite Nr. 4

Fax to Phone Line Connection • Plug the provided phone cord into the wall jack Hand Set (Phone) Wall Jack (Existing Phone Cord) (Phone Cord included with Canon printer) Previous Next 4

Inhaltszusammenfassung zur Seite Nr. 5

Fax to Phone Line Connection • Plug the provided phone cord into the “L” jack located on the rear of the multifunction Hand Set (Phone) Wall Jack (Existing Phone Cord) (Phone Cord included with Canon printer) Previous Next 5

Inhaltszusammenfassung zur Seite Nr. 6

Fax to Phone Line Connection • Remove the white plug (D) from the upper jack. Hand Set (Phone) Wall Jack (Existing Phone Cord) (Phone Cord included with Canon printer) Previous Next 6

Inhaltszusammenfassung zur Seite Nr. 7

Fax to Phone Line Connection • Plug the second phone cord into the “telephone” jack located on the rear of the multifunction Hand Set (Phone) Wall Jack (Existing Phone Cord) (Phone Cord included with Canon printer) Previous Next 7

Inhaltszusammenfassung zur Seite Nr. 8

Fax to Phone Line Connection • Plug the second phone cord into the phone Hand Set (Phone) Wall Jack (Existing Phone Cord) (Phone Cord included with Canon printer) Previous Next 8

Inhaltszusammenfassung zur Seite Nr. 9

Setting Up The Receive Mode Previous Next

Inhaltszusammenfassung zur Seite Nr. 10

Step 1 Step 2 Turn on the MX420 by pressing the Press the FAX button. ON button. Previous Next 10

Inhaltszusammenfassung zur Seite Nr. 11

Step 3 Step 4 The fax standby screen will appear. Press the center FUNCTION button. Previous Next 11

Inhaltszusammenfassung zur Seite Nr. 12

Step 5 Step 6 The Receive mode settings screen Use the UP or DOWN button to will appear. select “TEL priority mode”. Previous Next 12

Inhaltszusammenfassung zur Seite Nr. 13

Step 7 Step 8 Press the right FUNCTION button Use the UP or DOWN button to under the Advanced label select “User-friendly reception”. Previous Next 13

Inhaltszusammenfassung zur Seite Nr. 14

Step 9 Step 10 Ensure “User-friendly reception” is Press the OK button selected Previous Next 14

Inhaltszusammenfassung zur Seite Nr. 15

Step 11 Step 12 The “User-friendly reception” Use the UP or DOWN button to screen will appear select “ON” Previous Next 15

Inhaltszusammenfassung zur Seite Nr. 16

Step 13 Step 14 Ensure “ON” is selected Press the OK button Previous Next 16

Inhaltszusammenfassung zur Seite Nr. 17

Step 15 Step 16 A confirmation screen will appear You will return to the “Advanced” briefly selection screen Previous Next 17

Inhaltszusammenfassung zur Seite Nr. 18

Step 17 Step 18 Press the BACK button You will return to the “Receive mode setting” screen. Confirm that “Tel priority mode” is selected Previous Next 18

Inhaltszusammenfassung zur Seite Nr. 19

Step 19 Step 20 Press the OK button You will return to the “Fax standby screen”. The MX420 is ready to receive a fax Previous Next 19

Inhaltszusammenfassung zur Seite Nr. 20

Receiving A Fax To receive a fax: • Pick up the handset on the phone connected to the MX420. • Listen for fax tones. • When the tones stop hang up the handset. • The MX420 will receive the fax document. IMPORTANT: In order to receive a fax, you must pick up the handset on a phone that is connected to the multifunction. Previous 20