Inhaltszusammenfassung zur Seite Nr. 1
Installing Your Multifunction
to Your Network for the First Time
PIXMA MX350 / PIXMA MX870
Mac OS
1
Inhaltszusammenfassung zur Seite Nr. 2
Navigation Tips for Macintosh Users To navigate this guide, please use the arrows on the MAC DOWN keyboard or use the PAGE UP and Page DOWN keys. LEFT RIGHT Page UP UP Page DOWN 2
Inhaltszusammenfassung zur Seite Nr. 3
Installing Your Multifunction to Your Network for the First Time PIXMA MX350 / PIXMA MX870 Mac OS Preparing to Connect My Multifunction to My Network 4 Network Requirements 4 Important Information You Need Before Adding Your Multifunction 5 Adding Your Multifunction to the Network 6 Confirm Connection Status 10 Installing the Drivers & Software 12 Registering the Printer & Scanner 17 3
Inhaltszusammenfassung zur Seite Nr. 4
Preparing to Connect My Multifunction To My Network Network Requirements Before connecting the machine to the network, make sure that configuration of the computer and access point or router is complete, and that the computer is connected to the network. Notes on Network Connection • The configuration, router functions, setup procedures and security settings of the network device vary depending on your system environment. For details, refer to your device's instruction manual or contact its man
Inhaltszusammenfassung zur Seite Nr. 5
Preparing to Connect My Multifunction To My Network An "Ad-hoc connection," which establishes a direct connection to the computer over a wireless connection without using an access point, is not supported. Be sure to prepare an access point. Important Information You Need Before Adding Your Multifunction The following information is required to connect to your access point or router. • Access Point Name/Network Name: Also referred to as SSID. A name to identify the specific access point. • Ne
Inhaltszusammenfassung zur Seite Nr. 6
Adding Your Multifunction to Your Network Adding Your Multifunction to Your Network Step One Step Two Press the Setup button (A) Select Wireless LAN setup, and then press the OK button. 6
Inhaltszusammenfassung zur Seite Nr. 7
Adding Your Multifunction to Your Network Step Three Step Four Select Yes, then press the OK button. Select Easy setup, and then press the OK button. When wireless connection is enabled, the Wi-Fi lamp (D) lights blue. 7
Inhaltszusammenfassung zur Seite Nr. 8
Adding Your Multifunction to Your Network Step Five Step Six Select the access point name, then press the OK button. When one of the following screens is displayed, enter the network key using the Numeric buttons (E), then press the OK button. If the following screen is not displayed, go to step 8 NOTE: If you are living in an apartment, nearby access Press the button to switch character entry modes. points in use may be detected. Enter upper and lower case letters of the alphabet correc
Inhaltszusammenfassung zur Seite Nr. 9
Adding Your Multifunction to Your Network Step Seven Step Eight Make sure that the network key is correct, and then When the connected to the access point screen appears, press the press the OK button. OK button. The Setup menu screen returns. NOTE: If Failed to connect to the access point. appears, press the OK button, make sure that the network key is correct, then enter it again. If a connection still cannot be established, refer to the printed manual: Network Setup Troubleshooting. 9
Inhaltszusammenfassung zur Seite Nr. 10
Adding Your Multifunction to Your Network Confirm Connection Status Step One Step Two On the Setup menu, select Device Settings , Select LAN settings, and then press the OK button. and then press the OK button. IMPORTANT: Confirm connection status after installing the machine in the target location. 10
Inhaltszusammenfassung zur Seite Nr. 11
Adding Your Multifunction to Your Network Step Three Step Four Select Confirm LAN settings, then press the OK button. Select WLAN setting list, then press the OK button. Make sure that Connection is set to Active, and then press the Copy button to return to standby. It may take a while before the connection is complete. In this case, press the Back* button and wait for about a minute, then display the Wireless LAN setting list screen again. *Back button location varies depending on model. NOT
Inhaltszusammenfassung zur Seite Nr. 12
Installing the Drivers & Software Installing the Drivers & Software To use the machine by connecting it to a computer, software including the drivers needs to be copied (installed) to the computer's hard disk. The installation process takes about 20 minutes. (The installation time varies depending on the computer environment or the number of applications to be installed.) Step Two Step One Double-click the Setup icon of the CD-ROM folder to proceed to the Turn on the computer, then insert th
Inhaltszusammenfassung zur Seite Nr. 13
Installing the Drivers & Software Step Three Step Four Enter your administrator name and password. Click OK. Click Easy Install. Click Install. The drivers, application software, and on-screen manuals are installed all together. If you do not know your administrator name or password, click Help , then follow the on-screen instructions. 13
Inhaltszusammenfassung zur Seite Nr. 14
Installing the Drivers & Software Step Five Step Six Click Install Select Use the printer on network, then click Next. *Applications may vary by model Follow any on-screen instructions to proceed with the software installation. 14
Inhaltszusammenfassung zur Seite Nr. 15
Installing the Drivers & Software Step Seven Step Eight Read the License Agreement screen carefully and click Yes. When the Printer Detection screen appears, click Next 15
Inhaltszusammenfassung zur Seite Nr. 16
Installing the Drivers & Software Step Nine On the Canon IJ Network Tool screen, choose your model and click Next. 16
Inhaltszusammenfassung zur Seite Nr. 17
Registering the Printer & Scanner Registering the Printer & Scanner This section describes how to register the machine on a Macintosh computer. Step One When the Register Printer and Scanner screen appears, click Register Printer. Proceed to the section that relates to your operating system for further installation instructions Mac OS X v. 10.5.x / 10.6.x: Go to Step 2-A Mac OS X v. 10.4.11: Go to Step 2-B 17
Inhaltszusammenfassung zur Seite Nr. 18
Registering the Printer & Scanner Step Two Step Two 2-B 2-A 1. When the Printer List window appears, click Add. 1. Select Canon IJ Network in the pop-up menu, select Canon MXxxx series in the list of printers, then click Add . *xxx refers to the model number. MX340 series shown in example, below 2. Go to Step Three, page 20. *The alphanumeric characters after Canon xxxx series is the machine's Bonjour service name or MAC address 18
Inhaltszusammenfassung zur Seite Nr. 19
Registering the Printer & Scanner Step Two Step Two 2-B 2-B 2. Click More Printers in the Printer Browser window. 3. Select Canon IJ Network in the pop-up menu, select Canon MXxxx series in the list of printers, then click Add . *xxx refers to the model number. MX340 series shown in example, below 19
Inhaltszusammenfassung zur Seite Nr. 20
Registering the Printer & Scanner Step Two Step Three 2-B When the Register Printer and Scanner screen appears, click 4. Make sure that the Canon MXxxx series is added to the Register Scanner. list of printers. *xxx refers to the model number. MX340 series shown in above example. 20
