Inhaltszusammenfassung zur Seite Nr. 1
User’s manual
CL2939
Big button big display
telephone/speakerphone
with caller ID/call waiting
Inhaltszusammenfassung zur Seite Nr. 2
Congratulations on purchasing your new AT&T product. Before using this AT&T product, please read the Important safety information on page 46 of this user’s manual. Please thoroughly read the user’s manual for all the feature operations and troubleshooting information you need to install and operate your new AT&T product. You can also visit our website at www.telephones.att.com or call 1 (800) 222-3111. In Canada, dial 1 (866) 288-4268. Model #: CL2939 Type: Big button big display telep
Inhaltszusammenfassung zur Seite Nr. 3
Parts checklist Your telephone package contains the following items. Save your sales receipt and original packaging in the event warranty service is necessary. Telephone base with mounting Handset bracket installed Coiled handset cord Telephone line cord User’s manual Quick start guide
Inhaltszusammenfassung zur Seite Nr. 4
Make sure to install four See page 6 for easy AA alkaline batteries instructions. STOP! (not included). If you subscribe to high-speed Internet service (digital subscriber line - DSL) through your telephone line, you must install a DSL filter between the telephone line cord and the telephone wall jack (page 8). The filter prevents noise and caller ID problems caused by DSL interference. Please contact your DSL service provider for more information about DSL filters. Your product may be ship
Inhaltszusammenfassung zur Seite Nr. 5
User’s manual CL2939 Big button big display telephone/speakerphone with caller ID/call waiting Table of contents Directory storage ................................28 Getting started Reviewing and dialing a directory Introduction ..............................................1 entry ....................................................30 Quick reference guide .........................2 Editing and deleting a directory Screen messages and icons .............4 entry .............................
Inhaltszusammenfassung zur Seite Nr. 6
Getting started Introduction This AT&T CL2939 big button big display telephone has a large tilt display for easy viewing and extra large buttons for easy viewing and dialing. This CL2939 telephone requires four alkaline AA batteries (purchased separately). When there is no battery installed or the power of the installed batteries is low, this telephone will work only to make or answer calls with the handset. This telephone is hearing-aid compatible. This telephone features a speakerphone fo
Inhaltszusammenfassung zur Seite Nr. 7
Getting started Quick reference guide REMOVE CID/ When the telephone is Press to display the call idle, press and hold to history (page 35). clear the call history While using the menu, (page 39). press to scroll through While reviewing an the settings (page 14). entry stored in the two- While reviewing the touch memory location, directory or call history, directory or call history, press to scroll down press to delete (pages (pages 30 and 35). 25, 31 and 39). While entering names, W
Inhaltszusammenfassung zur Seite Nr. 8
Getting started Quick reference guide MENU RINGER VOL switch Press to enter the menu Slide to adjust the (page 14). ringer volume (page 13). While reviewing the call history, press to store VOL switch the displayed name and Slide to adjust the number in the directory listening volume on (page 37). the handset (page 13). While reviewing the directory, press to edit VOL switch the displayed entry Slide to adjust the (page 31). listening volume on the speakerphone AUDIO ASSIST™ (pag
Inhaltszusammenfassung zur Seite Nr. 9
Getting started Screen messages and icons Display screen messages CALL LOG EMPTY There are no call history entries. DELETED All the entries stored in the call history have been deleted. -OR- The last number dialed is deleted. DIRECTORY EMPTY There are no telephone numbers stored in the directory. END OF LIST You have reached the end of the call history records. LINE IN USE Another telephone on the same line is in use. -OR- No telephone line cord is connected to the telephone. LINE RINGI
Inhaltszusammenfassung zur Seite Nr. 10
Getting started Screen messages and icons Screen icons NEW The displayed call history entry is unreviewed. REP You have received more than one call from this 16 CALLS 5 NEW number. The position of the number stored in the call 05 NEW REP AM history. No: 05 ERR12:00 11-20 The ringer is turned off. There is an error in the caller ID information. On when the line is in use. -OR- Flashes when there is an incoming call. The power of the installed batteries is low. 5
Inhaltszusammenfassung zur Seite Nr. 11
Getting started Battery installation (purchased separately) Before using the telephone, you should install four good AA alkaline batteries (not included) to provide memory backup and enable the use of some features. The four AA batteries are required for the following features to work: speakerphone, mute, flash, caller ID features, display, menu, directory, clock, audio assist and the IN USE light. If you unplug the telephone from the telephone wall jack, or you lose telephone service for f
Inhaltszusammenfassung zur Seite Nr. 12
Getting started Battery installation (purchased separately) 5. Rotate the bracket and lock it back as shown below. You can use this telephone without batteries installed. If you do so, the telephone works only to make and answer calls with the handset, adjust volume (ringer or handset volume) or use the last number redial feature. NOTES: • Use disposable alkaline AA batteries only. Do not use rechargeable batteries. • If you do not use the telephone for a long time, disconnect and remove the
Inhaltszusammenfassung zur Seite Nr. 13
Getting started Telephone installation If you subscribe to high-speed Internet service (digital subscriber line - DSL) through your telephone line, you must install a DSL filter between the telephone line cord and the telephone wall jack. The filter prevents noise and caller ID problems caused by DSL interference. Please contact your DSL service provider for more information about DSL filters. Follow the steps below to install the telephone. 1. Plug one end of the coiled handset cord into th
Inhaltszusammenfassung zur Seite Nr. 14
Getting started Installation options The telephone base comes with the bracket mounted for tabletop use. If you want to mount your telephone on a wall, use the mounting bracket to connect with a standard dual-stud telephone wall mounting plate. If you do not have this mounting plate, you can purchase one from many hardware or consumer electronic retailers. Professional assistance may be required to install the mounting plate. Tabletop to wall-mount installation To install the telephone base
Inhaltszusammenfassung zur Seite Nr. 15
Getting started Installation options 3. Plug one end of the telephone line cord into the TEL LINE jack on the back of the telephone base. Route the telephone line cord through the slot. Bundle the telephone line cord and secure it with a twist tie. Place the bundled telephone line cord inside the bracket. 4. Plug the other end of the telephone line cord into a telephone wall jack. DSL filter (not included) is required if you have DSL high-speed Internet service. 5. Place the telephone just
Inhaltszusammenfassung zur Seite Nr. 16
Getting started Installation options Wall-mount to tabletop installation To change the telephone base from the wall-mount position to tabletop position, follow the steps below. 1. Slide the telephone base upwards, then pull the telephone base away from the wall and remove the studs. 2. Unplug the telephone line cord from the telephone wall jack and the telephone base. Untie the bundled telephone line cord. Remove the telephone line cord from the slot on the bottom of the telephone base. 3. L
Inhaltszusammenfassung zur Seite Nr. 17
Getting started Installation options 4. Lift and rotate the bracket and lock it into tabletop position as indicated below. Tabletop-mount Wall-mount position position 5. Plug one end of the telephone line cord into the TEL LINE jack on the back of the telephone base. Plug the other end of the telephone line cord into a telephone wall jack. Place the handset in the telephone base. Telephone wall jack DSL filter (not included) is required if you have DSL high-speed Internet service. 6. Rota
Inhaltszusammenfassung zur Seite Nr. 18
Telephone settings Volume control Ringer volume Use the RINGER VOL switch on the right side of the telephone base to set the ringer volume or turn the ringer off. Adjust the RINGER VOL switch to set the ringer volume to off, low, middle or high. When set to off, the screen shows . Handset volume Use the VOL switch on the right side of the telephone base to adjust the listening volume from the handset. Speakerphone volume Use the VOL switch on the right side of the telephone base to adjust
Inhaltszusammenfassung zur Seite Nr. 19
Telephone settings Menu setup Menu operation The screen display prompts help you set up the telephone when you first install it. You can always get back to these setup screens by pressing MENU. NOTE: You can exit feature setup at any time by pressing FLASH or by lifting the handset when there is no incoming call. For complete feature setup options, see Feature summary on page 15. Set features You can customize how the features of this product work. 1. Press MENU and then SELECT repeatedly
Inhaltszusammenfassung zur Seite Nr. 20
Telephone settings Menu setup Feature summary Default settings are indicated by * in the following list. Feature/options Function LANGUAGE Choose whether the display text appears is English, Spanish, or French. ENGLISH* ESPANOL FRANCAIS SET CONTRAST Adjust screen brightness to a comfortable level, from 1 (light) to 4 (dark). 1, 2*, 3, 4 DIAL MODE Set tone (touch-tone) or pulse (dial-pulse) dialing. TONE* PULSE NOTE: If you have dial-pulse dialing service only, you can temporarily switch
