Inhaltszusammenfassung zur Seite Nr. 1
Wells-Gardner Electronics Corporation
User Manual for
D9400 D9410 Series
Digital-Control Color Monitor
Wells-Gardner Electronics
9500 W. 55th Street Suite A
Mc Cook, Il. 60525-3605
(708) 290-2100
Revision ORG/E11004
D9400 User manual
Date 2-10-06
Inhaltszusammenfassung zur Seite Nr. 2
Wells-Gardner Electronics Corporation Picture Tube. • Size: 27V Regular and Flat size to customer requirement • Dot Pitch: .83mm Signal Input. • Video Input: Analog, Positive Signal 4 / 2.2Volts CGA (0.7V p-p)VGA • Horizontal Sync: TTL Level, Positive or Negative Pulse • Scanning : 15.75 KHz-50KHz • Vertical Input: TTL Level, Positive or Negative pulse • Scanning : 40-100Hz Power Supply. • Power Input : 90-240 VAC, 50/60Hz •
Inhaltszusammenfassung zur Seite Nr. 3
Wells-Gardner Electronics Corporation FEATURES: I²C BUS control. The monitor is designed with I²C BUS control for simplifying the circuitry. Automatic mode recognition of preset factory modes No control pots to wear out SET UP: Setting up your monitor is easy. All you have to do is make a few simple connections and adjustments. The procedure is as follows: START UP: Your monitor starts up automatically when you insert the power plug to power source.
Inhaltszusammenfassung zur Seite Nr. 4
Wells-Gardner Electronics Corporation CONTROLS AND ADJUSTMENTS: There are fiver switches on the control panel. The adjustable controls allow the best display status for individual requirements. 1.0 Key Function. 1. OSD / EXIT OSD – Call the Main-Menu OSD 2. FUN – / FUN + When the Main-Menu is displayed, you can select each function using these keys 3. KEY - / KEY + When the Sub-Menu is displayed, you can change the amplitude of The sel
Inhaltszusammenfassung zur Seite Nr. 5
Wells-Gardner Electronics Corporation A. ADJUSTMENT PROCEDURE . BRIGHTNESS ADJUSTMENT 1) Press the “OSD” key The Main-Menu OSD will come up as pictured above. 2) Search “BRIGHTNESS” sub-menu using “+ or - FUN” key on the Main-Menu OSD. 3) The “BRIGHTNESS” OSD color changes from blue to red. 4) Adjust Brightness as much as you want using “+ or -” key. 5) After finishing the Brightness adjust, press the “OSD ” key. The “OSD” will Disappear. The new Bri
Inhaltszusammenfassung zur Seite Nr. 6
Wells-Gardner Electronics Corporation OTHER “OSD” ADJUSTMENTS OSD FUN- FUN + KEY - KEY + OSD MENU AND USER FUNCTIONS. • CONTRAST - PICTURE CONTROL ADJUSTMENT SAME ABOVE • H. POSITION - SCREEN POSITION ADJUSTMENT SAME ABOVE • V. POSIT
Inhaltszusammenfassung zur Seite Nr. 7
Wells-Gardner Electronics Corporation COLOR SUBMENU RGB SCREEN COLOR - COLOR PREFERENCE • COLOR ADJUSTMENT. Factory preset. COLOR 1 - 9300°K: X=0.285, Y=0.293 COLOR 2 - 6500°K: X=0.312, Y=0.329 COLOR ADJUSTMENT - USER PREFERENCE 1) Press the “OSD” button to show the Main-Menu OSD. 2) Search the “RGB - ICON” sub-menu by using “+ or - Key” key on the Main-Menu OSD. 3) SELECT
Inhaltszusammenfassung zur Seite Nr. 8
Wells-Gardner Electronics Corporation LANGUAGE - USER PREFERENCE LANGUAGE SELECTION - USER PREFERENCE 1) Press the “OSD” button to show the Main-Menu OSD. 2) SELECT the “LANGUAGE - ICON” by pressing “+ FUN” Key. The language Sub-Menu OSD appears as Shown by the figure above. The language BOX WILL BE FLASHING RED. 3) Press “+ or - KEY” to select one of the desired language
Inhaltszusammenfassung zur Seite Nr. 9
Wells-Gardner Electronics Corporation TIMING CHART: 5 Standard Factory Pre-Set Timing Modes. Can be set to any customer requirement of 15.75-40Khz hor and 40-100Hz vert. Timing shown is based on 801GC/GX signal generator CGA MID- RES Mode 3 Mode4 Mode 5 HORIZONTAL 640X240 773X384 640X480 720X400 800X600 VGA_M3 VG
Inhaltszusammenfassung zur Seite Nr. 10
Wells-Gardner Electronics Corporation
Inhaltszusammenfassung zur Seite Nr. 11
Wells-Gardner Electronics Corporation
