Inhaltszusammenfassung zur Seite Nr. 1
®
ViewSonic
VG710b/VG710s
LCD Display
- User Guide
- Guide de l'utilisateur
- Bedienungsanleitung
- Guía del usuario
- Guida dell'utente
- Guia do usuário
- Användarhandbok
- Käyttöopas
- Podr ęcznik u żytkownika
- Használati útmutató
- Py ков о дств о по льэ ова т е ля
- Uživatelská píruka
- ユー ザ ー ズ ガ イ ド
- 使用手冊
- 使用手冊
- 사용자 안내서
-
Inhaltszusammenfassung zur Seite Nr. 2
Content Compliance Information.............................................................................. 1 Important Safety Instructions...................................................................... 2 Product Registration................................................................................... 3 Getting Started Package Contents ...................................................................................... 4 Precautions ...............................................
Inhaltszusammenfassung zur Seite Nr. 3
Compliance Information For U.S.A. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy, and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there i
Inhaltszusammenfassung zur Seite Nr. 4
Important Safety Instructions 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this unit near water. 6. Clean only with dry cloth. 7. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. 8. Do not install near any heat sources such as radiators, heat registers, stoves, or other devices (including amplifiers) that produce heat. 9. Do not defeat the safety purpose of the polarized
Inhaltszusammenfassung zur Seite Nr. 5
Copyright© ViewSonic Corporation, 2004. All rights reserved. Macintosh and Power Macintosh are registered trademarks of Apple Computer, Inc. Microsoft, Windows, Windows NT, and the Windows logo are registered trademarks of Microsoft Corporation in the United States and other countries. ViewSonic, the three birds logo, OnView, ViewMatch, and ViewMeter are registered trademarks of ViewSonic Corporation. VESA is a registered trademark of the Video Electronics Standards Association. DPMS and DDC are
Inhaltszusammenfassung zur Seite Nr. 6
Getting Started ® Congratulations on your purchase of a ViewSonic LCD display. Important! Save the original box and all packing material for future shipping needs. NOTE: The word “Windows” in this user guide refers to the following Microsoft operating systems: Windows ‘95, Windows NT, Windows ‘98, Windows 2000, Windows Me (Millennium), and Windows XP. Package Contents Your LCD display package includes: • LCD display • VGA cable • Power cord • AC/DC power adapter • Audio cable (for speakers) • Vi
Inhaltszusammenfassung zur Seite Nr. 7
Quick Installation 1. Connect power cord and AC/DC the Windows Explorer, then double-click adapter on viewsonic.exe. 2. Connect video cable • Follow the on-screen instructions. • Make sure both the LCD display and 5. Audio Installation (optional) computer are turned OFF • Speakers Connect the audio cable • Remove rear panel covers if necessary (lime-colored) to the AUDIO OUT port of your computer’s sound card, then to • Connect the video cable from the LCD the LCD display’s AUDIO IN port (see di
Inhaltszusammenfassung zur Seite Nr. 8
Installation of Wall Mount (Optional) To obtain a wall-mounting kit, contact ViewSonic or your local dealer. Refer to the instructions that come with the base mounting kit. To convert your LCD display from a desk-mounted to a wall-mounted display, do the following: 1. Disconnect Power. Four vesa screw holes 2. Lay the LCD display face down on a towel or blanket. If you remove the base for a wall mount, the microphone in the base is disconnected. But, you can leave the base attached to the LCD di
Inhaltszusammenfassung zur Seite Nr. 9
Using the LCD Display Setting the Timing Mode Setting the timing mode is important for maximizing the quality of the screen image and minimizing eye strain. The timing mode consists of the resolution (example 1280 x 1024) and refresh rate (or vertical frequency; example 75 Hz). After setting the timing mode, use the ® OnView controls to adjust the screen image. For the best picture quality set your LCD display timing mode to: VESA 1280 x 1024 @ 60Hz. To set the Timing Mode: 1. Set the resolution
Inhaltszusammenfassung zur Seite Nr. 10
Adjusting the Screen Image ® Use the buttons on the front control panel to display and adjust the OnView controls which display on the screen. The OnView controls are explained at the top of the next page and are defined in “Main Menu Controls” on page 10. Main Menu with OnView controls Front Control Panel shown below in detail Speaker Speaker Scrolls through menu options and Displays the Main Menu or adjusts the displayed control. exits the control screen and Also a shortcut to display the C
Inhaltszusammenfassung zur Seite Nr. 11
Do the following to adjust the screen image: 1. To display the Main Menu, press button [1]. NOTE: All OnView menus and adjustment screens disappear automatically after about 15 seconds. This is adjustable through the OSD timeout setting in the setup menu. 2. To select a control you want to adjust, press or to scroll up or down the Main Menu. 3. After the control is selected, press button [2]. A control screen like the one shown below appears. The command line at the bottom of the control scr
Inhaltszusammenfassung zur Seite Nr. 12
Main Menu Controls Adjust the menu items shown below by using the up and down buttons. Control Explanation Auto Image Adjust sizes and centers the screen image automatically. Contrast adjusts the difference between the image background (black level) and the foreground (white level). Brightness adjusts background black level of the screen image. Input Select toggles between inputs if you have more than one computer connected to the VG710b/VG710s. Audio Adjust Volume increases the volume, decrea
Inhaltszusammenfassung zur Seite Nr. 13
Control Explanation 9300K-Adds blue to the screen image for cooler white (used in most office settings with fluorescent lighting). 6500K-Adds red to the screen image for warmer white and richer red. 5400K-Adds green to the screen image for a darker color. 5000K-Adds blue and green to the screen image for a darker color. User Color Individual adjustments for red (R), green (G), and blue (B). 1. To select color (R, G or B) press button [2]. To adjust selected color, press and . Important: If you
Inhaltszusammenfassung zur Seite Nr. 14
Control Explanation H. Size (Horizontal Size) adjusts the width of the screen image. H./V. Position (Horizontal/Vertical Position) moves the screen image left or right and up or down. Fine Tune sharpens the focus by aligning the text and/or graphic characters. NOTE: Try Auto Image Adjust first. Sharpness adjusts the clarity and focus of the screen image. Setup menu displays the menu shown below: Language allows you to choose the language used in the menus and control screens. Resolution Notice a
Inhaltszusammenfassung zur Seite Nr. 15
Control Explanation If you enable the Resolution Notice shown above and your computer is set at a resolution other than 1280 x 1024, the following screen appears. OSD Position allows you to move the on-screen display menus and control screens. OSD Timeout sets the length of time the on-screen display screen is displayed. For example, with a “30 second” setting, if a control is not pushed within 30 seconds, the display screen disappears. OSD Background On/Off allows you to turn the On-Screen Dis
Inhaltszusammenfassung zur Seite Nr. 16
Other Information Specifications LCD Type 17” (full 17" viewable diagonal area), TFT (Thin Film Transistor), Active Matrix SXGA LCD, 0.264 mm pixel pitch Color Filter RGB vertical stripe Glass Surface Anti-Glare Input Signal Video Sync RGB analog (0.7/1.0 Vp-p, 75 ohms) Separate Sync, TMDS Digital (100ohms) f :30-82 kHz, f :50-85 Hz h v Compatibility PC Up to 1280 x 1024 Non-interlaced 1 Power Macintosh up to 1280 x 1024 Macintosh Resolution Recommended 1280 x 1024 @ 60, 70, 72, 75 Hz and suppor
Inhaltszusammenfassung zur Seite Nr. 17
Troubleshooting No power • Make sure power button (or switch) is ON. • Make sure A/C power cord is securely connected to the LCD display. • Plug another electrical device (like a radio) into the power outlet to verify that the outlet is supplying proper voltage. Power is ON but no screen image • Make sure the video cable supplied with the LCD display is tightly secured to the video output port on the back of the computer. If the other end of the video cable is not attached permanently to the LCD
Inhaltszusammenfassung zur Seite Nr. 18
Customer Support For technical support or product service, see the table below or contact your reseller. NOTE: You will need the product serial number. T = Telephone Country/Region Website Email F = FAX T= (800) 688 6688 United States www.viewsonic.com/support service.us@viewsonic.com F= (909) 468 1202 T= (886) 463 4775 Canada www.viewsonic.com/support service.ca@viewsonic.com F= (909) 468 1202 T= (0800) 833 648 United Kingdom www.viewsoniceurope.com service.eu@viewsoniceurope.com F= +44 (0) 129
Inhaltszusammenfassung zur Seite Nr. 19
Cleaning the LCD Display • MAKE SURE THE LCD DISPLAY IS TURNED OFF. • NEVER SPRAY OR POUR ANY LIQUID DIRECTLY ONTO THE SCREEN OR CASE. To clean the screen: 1. Wipe the screen with a clean, soft, lint-free cloth. This removes dust and other particles. 2. If still not clean, apply a small amount of non-ammonia, non-alcohol based glass cleaner onto a clean, soft, lint-free cloth, and wipe the screen. To clean the case: 1. Use a soft, dry cloth. 2. If still not clean, apply a small amount of a non-
Inhaltszusammenfassung zur Seite Nr. 20
Limited Warranty VIEWSONIC LCD DISPLAY What the warranty covers: ® ViewSonic warrants its products to be free from defects in material and workmanship during the warranty period. If a product proves to be defective in material or workmanship during the warranty period, ViewSonic will, at its sole option, repair or replace the product with a like product. Replacement product or parts may include remanufactured or refurbished parts or components. How long the warranty is effective: ViewSonic LCD d
