Inhaltszusammenfassung zur Seite Nr. 1
VG510b LCD Display
VG510s
User Guide
Guide de l’utilisateur
Bedienungsanleitung
Guía del usuario
Guida dell'utente
Guia do usuário
Användarhandbok
Käyttöopas
With Landscape & Portrait Display Modes
Full 15" Diagonal Viewable Screen
Inhaltszusammenfassung zur Seite Nr. 2
Contents Product Registration ..................................................2 For Your Records ......................................................2 Getting Started ..................................................... 3 Package Contents ..................................................... 3 Precautions ...............................................................3 Quick Installation ....................................................... 4 Installation of Wall Mount (Optional) ........
Inhaltszusammenfassung zur Seite Nr. 3
Copyright © ViewSonic Corporation, 2003. All rights reserved. Macintosh and Power Macintosh are registered trademarks of Apple Computer, Inc. Microsoft, Windows, Windows NT, and the Windows logo are registered trademarks of Microsoft Corporation in the United States and other countries. ViewSonic, the three birds logo, OnView, ViewMatch, and ViewMeter are registered trademarks of ViewSonic Corporation. VESA is a registered trademark of the Video Electronics Standards Association. DPMS and D
Inhaltszusammenfassung zur Seite Nr. 4
Getting Started ® ® Congratulations on your purchase of a ViewSonic LCD Display . Important! Save the original box and all packing material for future shipping needs. NOTE: The word “Windows” in this user guide refers to the following Microsoft operating systems: Windows ‘95, Windows NT, Windows ‘98, Windows 2000, Windows Me (Millennium), and Windows XP. Package Contents • LCD display • VGA cable • AC/DC power adapter • Power cords • Audio cable (for speakers) • ViewSonic Wizard CD-ROM • N
Inhaltszusammenfassung zur Seite Nr. 5
Quick Installation 1 Connect power cord and AC/DC 4 Wizard CD (continued) adapter (2) Follow the on-screen instructions. 2 Connect video cable 5 Audio Installation (optional) • Make sure both the LCD display and • Speakers Connect the audio cable (lime-colored) to the AUDIO OUT port of your computer’s sound computer are turned OFF card, then to the LCD display’s AUDIO IN port • Remove rear panel covers if necessary (see illustration below). • Connect the video cable from the LCD • Microphon
Inhaltszusammenfassung zur Seite Nr. 6
Installation of Wall Mount (Optional) To obtain a wall-mounting kit, contact ViewSonic or your local dealer. Refer to the instructions that come with the base mounting kit. To convert your LCD display from a desk-mounted to a wall-mounted display, do the following: 1 Disconnect Power. Four screw holes for wall mount 2 Lay the LCD display face down on a towel or blanket. If you remove the base for a wall mount, the microphone in the base is disconnected. But, you can leave the base att
Inhaltszusammenfassung zur Seite Nr. 7
Using the LCD Display Setting the Timing Mode Setting the timing mode is important for maximizing the quality of the screen image and minimizing eye strain. The timing mode consists of the resolution (example 1280 x 1024) and refresh rate (or vertical frequency; ® example 60 Hz). After setting the timing mode, use the OnView controls to adjust the screen image. For the best picture quality set your LCD display timing mode to: VESA 1024 x 768 @ 60 Hz. To set the Timing Mode: ® 1 Set the res
Inhaltszusammenfassung zur Seite Nr. 8
Adjusting the Screen Image ® Use the buttons on the front control panel to display and adjust the OnView controls which display on the screen. The OnView controls are explained at the top of the next page and are defined in “Main Menu Controls” on page 9. Main Menu with OnView controls Front Control Panel shown below Speaker Speaker Scrolls through menu options and adjusts the displayed control. Also a shortcut to display the Contrast adjustment control screen. Displays the Main Menu or ex
Inhaltszusammenfassung zur Seite Nr. 9
Do the following to adjust the screen image: 1 To display the Main Menu, press button [1]. NOTE: All OnView menus and adjustment screens disappear automatically after about 30 seconds. This time period is adjustable through the Setup menu and the OSD timeout control described on page 11. 2 To highlight a control you want to adjust, press ▲ or ▼ to scroll up or down the Main Menu. 3 To select the highlighted control, press button [2]. A control screen appears like the example shown below. T
Inhaltszusammenfassung zur Seite Nr. 10
Main Menu Controls Adjust the menu items shown below by using the up and down buttons. Control Explanation Auto Image Adjust automatically sizes, centers, and fine tunes the video signal to eliminate waviness and distortion. Press the [2] button to obtain a sharper image. NOTE: Auto Image Adjust works with most common video cards. If this function does not work on your LCD display, then lower the video refresh rate to 60 Hz and set the resolution to its pre-set value. Contrast adju
Inhaltszusammenfassung zur Seite Nr. 11
Control Explanation Information displays the timing mode (video signal input) coming from the graphics card in your computer. See your graphic card’s user guide for instructions on changing the resolution and refresh rate (vertical frequency). VESA 1024 x 768 @ 60 Hz (recommended) means that the resolution is 1024 x 768 and the refresh rate is 60 Hertz. Manual Image Adjust The Manual Image Adjust controls are explained below: H. Size (Horizontal Size) adjusts the width of the screen image.
Inhaltszusammenfassung zur Seite Nr. 12
Control Explanation Setup Menu displays the menu shown below: The Setup Menu controls are explained below: Language Select allows you to choose the language used in the menus and control screens. Resolution Notice advises the optimal resolution to use. After selecting Resolution Notice, a sub menu appears asking if you want to Disable or Enable the notice. If you want the Resolution Notice to appear on-screen, select Enable. OSD Position allows you to move the on-screen display menus and co
Inhaltszusammenfassung zur Seite Nr. 13
Other Information Specifications Type 15" (full 15" viewable diagonal area), TFT (Thin Film LCD Transistor), Active Matrix XGA LCD, 0.297mm pixel pitch Color Filter RGB vertical stripe Glass surface Anti-Glare Video Sync RGB analog (0.7/1.0 Vp-p, 75 ohms) Input signal Separate Sync f :30-62 kHz, f :50-75 Hz h v PC Up to 1024 x 768 Non-interlaced Compatibility 1 Power Macintosh up to 1024 x 768 Macintosh Recommended 1024 x 768 @ 60, 70, 72, 75 Hz Resolution and supported 800 x 600 @ 56, 60, 72,
Inhaltszusammenfassung zur Seite Nr. 14
Troubleshooting No power • Make sure power button (or switch) is ON. • Make sure A/C power cord is securely connected to the LCD display. • Plug another electrical device (like a radio) into the power outlet to verify that the outlet is supplying proper voltage. Power is ON but no screen image • Make sure the video cable supplied with the LCD display is tightly secured to the video output port on the back of the computer. If the other end of the video cable is not attached permanently to the
Inhaltszusammenfassung zur Seite Nr. 15
Customer Support For technical support or product service, see the table below or contact your reseller. NOTE: You will need the product serial number. Country/ Web site T = Telephone Email Region F = FAX United States viewsonic.com/ T: (800) 688-6688 service.us@ support F: (909) 468-1202 viewsonic.com Canada viewsonic.com/ T: (800) 688-6688 support F: (909) 468-1202 service.ca@ viewsonic.com United Kingdom viewsoniceurope.com T: 0800 833 648 service.eu@ F: (01293) 643910 viewsoniceurope.com Eu
Inhaltszusammenfassung zur Seite Nr. 16
Cleaning the LCD Display • MAKE SURE THE LCD DISPLAY IS TURNED OFF. • NEVER SPRAY OR POUR ANY LIQUID DIRECTLY ONTO THE SCREEN OR CASE. To clean the screen: 1 Wipe the screen with a clean, soft, lint-free cloth. This removes dust and other particles. 2 If still not clean, apply a small amount of non-ammonia, non-alcohol based glass cleaner onto a clean, soft, lint-free cloth, and wipe the screen. To clean the case: 1 Use a soft, dry cloth. If still not clean, apply a small amount of a non-a
Inhaltszusammenfassung zur Seite Nr. 17
Limited Warranty VIEWSONIC LCD DISPLAY What the warranty covers: ® ViewSonic warrants its products to be free from defects in material and workmanship during the warranty period. If a product proves to be defective in material or workmanship during the warranty period, ViewSonic will, at its sole option, repair or replace the product with a like product. Replacement product or parts may include remanufactured or refurbished parts or components. How long the warranty is effective: ViewSonic LC
Inhaltszusammenfassung zur Seite Nr. 18
Appendix Safety Guidelines Warning: This device must be operated with the original power supply, part number: LSE0107A1240 CAUTION: The socket-outlet should be installed near the equipment and should be easily accessible. CAUTION: Use a power cable that is properly grounded. Always use the appropriate AC cord that is certified for the individual country. Some examples are listed below: USA.................UL Switzerland ..... SEV Canada.............CSA Britain ............. BASE/BS Germany.....
Inhaltszusammenfassung zur Seite Nr. 19
Compliance Information for U.S.A. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a resi- dential installation. This equipment generates, uses, and can radiate radio frequency energy, and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, ther
Inhaltszusammenfassung zur Seite Nr. 20
ViewSonic Corporation
