Inhaltszusammenfassung zur Seite Nr. 1
CD4230
- User Guide
LCD Commercial Monitor
- Guide de l’utilisateur
- Guía del usuario
Model No. : VS12541
Inhaltszusammenfassung zur Seite Nr. 2
Content Safety Precautions...................................................................................................5 Package Contents ....................................................................................................6 Optional accessories................................................................................................................ 6 Parts Name and Functions......................................................................................7 Control
Inhaltszusammenfassung zur Seite Nr. 3
Compliance Information For U.S.A. This device complies with part 15 of FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protect
Inhaltszusammenfassung zur Seite Nr. 4
Important Safety Instructions 1. Read these instructions completely before using the equipment. 2. Keep these instructions in a safe place. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this equipment near water. Warning: To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. 6. Clean with a soft, dry cloth. If further cleaning is required, see “Cleaning the Monitor” in this guide for further instructions. 7. Do not block any ventilati
Inhaltszusammenfassung zur Seite Nr. 5
Declaration of RoHS Compliance This product has been designed and manufactured in compliance with Directive 2002/ /95/EC of the European Parliament and the Council on restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS Directive) and is deemed to comply with the maximum concentration values issued by the European Technical Adaptation Committee (TAC) as shown below: Substance Proposed Maximum Concentration Actual Concentration Lead (Pb) 0.1% < 0.
Inhaltszusammenfassung zur Seite Nr. 6
Copyright Information Copyright ViewSonic Corporation, 2009. All rights reserved. Macintosh and Power Macintosh are registered trademarks of Apple Computer, Inc. Microsoft, Windows, Windows NT, and the Windows logo are registered trademarks of Microsoft Corporation in the United States and other countries. ViewSonic, the three birds logo, OnView, ViewMatch, and ViewMeter are registered trademarks of ViewSonic Corporation. VESA is a registered trademark of the Video Electronics Standards Asso
Inhaltszusammenfassung zur Seite Nr. 7
Safety Precautions FOR OPTIMUM PERFORMANCE, PLEASE NOTE THE FOLLOWING WHEN SETTING UP AND USING THE LCD COLOR MONITOR: • DO NOT REMOVE MONITOR BACK COVER. There are no user serviceable parts inside and opening or removing covers may expose you to dangerous shock hazards or other risks. Refer all servicing to qualified service personnel. • Do not spill any liquids into the cabinet or use your monitor near water. • Do not insert objects of any kind into the cabinet slots, as they may touch dange
Inhaltszusammenfassung zur Seite Nr. 8
Package Contents Your new CD4230 monitor box should contain the following: LCD monitor Quick Start Guide Power cord for North America VGA cable CD Wizard Wireless Remote Control AAA battery (x 2) Optional accessories M6 screw for stand M4 screw for stand M3 screw for Monitor stand External speaker installation installation speaker installation (x 2) (x 2) (x 2) (x 8) (x 6) ViewSonic CD4230 6
Inhaltszusammenfassung zur Seite Nr. 9
Parts Name and Functions Control Panel 1 2 3 4 5 6 7 1 Carrying handles - Use these handles to carry the LCD monitor while installing. 2 INPUT button - Press this button to select an input source. Acts as SET button with OSD menu. 3 MENU button - Activates the OSD menu when the OSD menu is turned-off. Acts as EXIT button to move to previous menu with OSD menu. 4 / button - Moves the selection highlight up or down in the OSD menu. 5 / button - Moves the selection highlight left or righ
Inhaltszusammenfassung zur Seite Nr. 10
Terminal Panel 23 22 21 18 19 20 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 connector to the RS232-IN connector of another 1 AC-IN (100-240VAC, 4.0A) CD4230 monitor. Connects to the supplied power cord. 12 Y Pb Pr OUT 2 AC-OUT (100-240VAC, 1.51A) To output signals from Y Pb Pr IN. Outputs AC power to another CD4230 monitor. 13 Y Pb Pr IN 3 LINE-IN Connects to equipment such as a DVD player, HDTV To input audio signals from external equipment such device or Laser disc player. as a computer
Inhaltszusammenfassung zur Seite Nr. 11
Wireless Remote Control 1 MUTE button To switch the mute function on/off. 2 1 2 Power button Switches the power on/off. *If the Power indicator on the monitor is not glowing, then no controls will work. 3 3 Number buttons These buttons are not used and do not work. 4 UP button 4 5 Acts as button to move the highlighted area up to 6 select the adjustment with OSD menu. 7 8 5 INPUT button 9 Selects from input signal: [CVBS1], [CVBS2], [S- Video], [VGA], [YPbPr], [DVI] and [HDMI]. 10 11 12 1
Inhaltszusammenfassung zur Seite Nr. 12
Installing the Remote Control Batteries The remote control is powered by 1.5V AAA batteries. To install or replace batteries: 1. Press and slide to open the cover. 2. Align the batteries according to the (+) and (-) indications inside the case. 3. Replace the cover. CAUTION: Incorrect use of batteries can result in leaks or bursting. Be careful especially about the following points. • Place “AAA” batteries matching the + and - signs on each battery to the + and - signs of the battery compartme
Inhaltszusammenfassung zur Seite Nr. 13
Setup Procedure 1. Determine the installation location CAUTION: DO NOT ATTEMPT TO INSTALL THE LCD MONITOR BY YOURSELF. Installation of your LCD monitor must be done by a qualified technician. Contact your dealer for more information. CAUTION: MOVING OR INSTALLING THE LCD MONITOR MUST BE DONE BY TWO OR MORE PEOPLE. Failure to follow this caution may result in injury if the LCD monitor falls. CAUTION: Do not mount or operate the monitor upside down, face up, or face down. CAUTION: Do not install
Inhaltszusammenfassung zur Seite Nr. 14
• Placing the monitor in portrait position, will shorten the average life of the LCD backlight. • Operational Environment (Temperature) shall be limited, as shown below: Operational Temperature 5 - 35 C / 41 - 95 F Environment Humidity 20 - 80% (without condensation) Please orientate the monitor in the direction shown below: Do not place monitor in landscape in any other manner. How to set-up 1. Remove the stands (legs) if attached. 2. The ViewSonic logo should be on the RIGHT side when facing t
Inhaltszusammenfassung zur Seite Nr. 15
How to Mount and Attach Options to the LCD Monitor Lay the protective sheet on a table, which was wrapped around the monitor when it was packaged, beneath the screen surface so as not to scratch the screen face. 400mm 200mm This device cannot be used or installed without the Tabletop Stand or other mounting accessory. Failure to follow correct mounting procedures could result in damage to the equipment or injury to the user or installer. Product warranty does not cover damage caused by impro
Inhaltszusammenfassung zur Seite Nr. 16
Ventilation Requirements for enclosure mounting To allow heat to disperse, leave space between surrounding objects as shown in the diagram below. 100mm 100mm 100mm 100mm To avoid monitor from falling Take measures to prevent the monitor from falling over in case of an earthquake or other disaster to lessen the probability of injury and damage resulting from fall. As shown in the figure, secure the monitor to a solid wall or pillar using rope (commercially available) strong enough to bear the w
Inhaltszusammenfassung zur Seite Nr. 17
Connections Before making connections: • First turn off the power of all the attached equipment and make connections. • Refer to the user manual included with each separate piece of equipment. Wiring Diagram LCD monitor (second monitor) DVD HD PC or equipment with digital interface VCR * Cables are not supplied ViewSonic CD4230 15
Inhaltszusammenfassung zur Seite Nr. 18
Connecting a Personal Computer Connecting your computer to your LCD monitor will enable you to display your computer's screen image. Some video cards may not display an image correctly. Connect the LCD Monitor to a Personal Computer • To connect the VGA-IN connector (mini D-sub 15 pin) on the LCD monitor, use a PC - Video RGB signal cable (mini D-sub 15 pin to mini D-sub 15 pin). • When connecting one or more LCD monitors, use the VGA-OUT connector (mini D-sub 15 pin). • The LINE-IN jack can b
Inhaltszusammenfassung zur Seite Nr. 19
Connecting with Digital Interface Equipment Connections can be made with equipment that is equipped with a digital interface compliant with the DVI (Digital Visual Interface) standard. Connect the LCD Monitor to a Computer with a Digital Output • The HDMI connector accepts a HDMI cable or a DVI-D to HDMI cable. • The HDMI connector can connect to HDMI output or DVI-D output of PC. • To maintain display quality, use a cable with a quality prescribed by HDMI and DVI standards. • The LINE-IN jack
Inhaltszusammenfassung zur Seite Nr. 20
Connecting a DVD Player with component output Connecting your DVD player to your LCD monitor will enable you to display DVD video. Refer to your DVD player owner’s manual for more information. Connect the LCD Monitor to a DVD Player • Connect the Y Pb Pr IN jacks of the LCD monitor to the Y Pb Pr output of the DVD player. Alternatively, you can also use a HDMI cable to connect the HDMI jack of the LCD monitor to the HDMI output of the DVD player. • The AUDIO-IN jacks can be used for audio inpu
