Inhaltszusammenfassung zur Seite Nr. 1
CMTC1713 / CMTC1913
TFT LCD Monitor
User Manual
Building Technologies
Fire Safety & Security Products
Inhaltszusammenfassung zur Seite Nr. 2
Technical specifications and availability subject to change without notice. © 2008 Copyright Siemens Switzerland Ltd We reserve all rights in this document and in the subject thereof. By acceptance of the document the recipient acknowledges these rights and undertakes not to publish the document nor the subject thereof in full or in part, nor to make them available to any third party without our prior express written authorization, nor to use it for any purpose other than for which it
Inhaltszusammenfassung zur Seite Nr. 3
Table of contents 1 General safety instructions..........................................................................4 1.1 Installation .......................................................................................................4 2 Standards and guidelines ............................................................................5 2.1 EU directives ...................................................................................................5 3 Technical data ....
Inhaltszusammenfassung zur Seite Nr. 4
General safety instructions 1 General safety instructions Read the general safety precautions before operating the device. Keep this document for reference. Always pass this document on together with the product. Please also take into account any additional country-specific, local safety standards or regulations concerning project planning, operation and disposal of the product. Liability claim Do not connect the device to the 230 V supply network if it is damaged or any parts are
Inhaltszusammenfassung zur Seite Nr. 5
Standards and guidelines 2 Standards and guidelines 2.1 EU directives This product complies with the requirements of the following European directives. The EU declaration of conformity is available to the responsible agencies at: Siemens Building Technologies Fire & Security Products GmbH & Co. oHG 76181 Karlsruhe Germany European Directive 2004/108/EC „Electromagnetic Compatibility” Compliance with the European Directive 2004/108/EC has been proven by testing according to the followin
Inhaltszusammenfassung zur Seite Nr. 6
Technical data 3 Technical data CMTC1713 CMTC1913 Panel type 17˝ TFT color LCD panel 19˝ TFT color LCD panel Screen size 431 mm (diagonal) 480 mm (diagonal) Viewable Size (H x V) 337.9 x 270.3 mm 376.32 x 301 mm Dot pitch (H x V) 0.264 x 0.264 mm 0.294 x 0.294 mm Viewing angle (H / V) 160° / 160° Contrast ratio 1000:1 800:1 2 Brightness 300 cd/m Resolution (H x V) 1280 x 1024 pixel Display colors 16.2 M Response time 5 ms Power requirements 100 – 240 V AC (PSU) Power requiremen
Inhaltszusammenfassung zur Seite Nr. 7
Dimension drawings 5 Dimension drawings Dimension CMTC1713 CMTC1913 1 Width monitor 382 mm 430 mm 2 Width base 243 mm 243 mm 3 Height monitor 330 mm 371 mm 4 Height monitor (with base) 392 mm 423 mm 5 Depth monitor 60 mm 62 mm 6 Depth monitor (with base) 195.5 mm 195.5 mm 6 Package contents 1 x Power supply 100 – 240 V AC (incl. power cable) 1 x VGA cable 1 x DVI cable 1 x Adapter (VGA to DVI) 1 x Audio stereo cable 1 x Remote control (incl. batteries) 1 x User manual
Inhaltszusammenfassung zur Seite Nr. 8
Hardware Description 7 Hardware Description 7.1 Connections 1 23 4 5 6 7 8 910 11 1 DC 12V IN DC power input 2 DVI IN PC signal input 3 VIDEO 1 IN Composite signal input for AV1 4 VIDEO 1 OUT Video looping output for AV1 5 VIDEO 2 IN Composite signal input for AV2 6 VIDEO 2 OUT Video looping output for AV2 7, 8 AUDIO IN (L+R) Stereo audio signal input for video 9 S-VIDEO IN Y/C separated signal input 10 S-VIDEO OUT Y/C separated signal looping output 10 PC STEREO IN Stereo audio st
Inhaltszusammenfassung zur Seite Nr. 9
Hardware Description 7.3 Remote functions POWER: Turns the power ON or OFF SOURCE: Selects input source (AV1, AV2, S-Video, DVI-D, DVI- A) APC (Auto Picture Control): Selects Picture mode [ 11] ACC (Auto Color Control): Selects Color tone [ 11] AV1: Selects AV1 input source AV2: Selects AV2 input source S-VIDEO: Selects S-VIDEO input source PC: Selects DVI input source (DVI-A, DVI-D) AUTO: Auto geometry adjustment (only in DVI mode) MUTE : Mutes the sound MENU: Enters and exits
Inhaltszusammenfassung zur Seite Nr. 10
Mounting the monitor 8 Mounting the monitor The LCD monitor CMTC1713/1913 is suitable for wall mounting by using the VESA 100 standard wall mount design. 1. Remove the base from the monitor by loosen the screws on the back panel. 2. Install the monitor to the wall as shown in the picture below. 10 Building Technologies CMTC1713_1913 User Manual Fire Safety & Security Products 19/12/2008
Inhaltszusammenfassung zur Seite Nr. 11
Adjusting the OSD screen 9 Adjusting the OSD screen All picture and sound settings for the monitor can be adjusted in the OSD menu (On Screen Display). To adjust the OSD screen: 1. Press the Menu button to enter the OSD menu. 2. Press the ▲/▼ buttons to select the desired option. The selected option is highlighted. 3. Press the ▶ button to enter the submenu for adjusting items. 4. Change the value you wish to adjust by using the ◀/▶ buttons. 5. Press the ◀ button to exit the submenu fo
Inhaltszusammenfassung zur Seite Nr. 12
Adjusting the OSD screen Color tones Custom* To manually adjust the color tones (Red, Green, Blue) Cool Gives the white colors a bluish tint Normal Gives the white colors a neutral tint Warm Gives the white colors a reddish tint *In DVI-A mode only Picture modes Dynamic Provides enhanced contrast and sharpness Standard Provides standard contrast and sharpness Movie Is recommended for viewing film-based content Mild Reduces contrast and sharpness Picture modes (in DVI-A mode)
Inhaltszusammenfassung zur Seite Nr. 13
Adjusting the OSD screen 9.3 Setup Option Function Values Language Sets the language of the OSD menu English, Français, Deutsch, Italiano, Español, Português, Nederland Key Lock Locks all buttons of the monitor On, Off Note: Use remote control to unlock [ 9] OSD Tone Changes background color of monitor menus Transparency, Blue (e.g. input source, information) Blue Displays a blue screen if the monitor receives no On, Off Screen signal PC* See table below Reset Resets the monit
Inhaltszusammenfassung zur Seite Nr. 14
Adjusting the OSD screen PC setup (only in DVI-A mode) Option Function Values Auto Adjust Auto geometry adjustment Phase Adjusts the number of horizontal picture elements 0 - 100 H-Position Adjusts the horizontally picture position 0 - 100 V-Position Adjusts the vertically picture position 0 - 100 Frequency Adjusts the vertical noise of screen image 0 - 100 9.4 Information Firmware version Displays the version of the monitor firmware 14 Building Technologies CMTC1713_1913 User M
Inhaltszusammenfassung zur Seite Nr. 15
Troubleshooting 10 Troubleshooting Problem Troubleshooting No image on display 1. Check that the power cord of the monitor has been screen connected securely into wall outlet or grounded extension cable or strip. 2. Power switch should be in the ON position and LED is lit. 3. Check that the Brightness and/or the Contrast of the display have not been turned down to minimum levels [ 11] . "Going to sleep" 1. Check that the signal cable is completely connected message on screen to the
Inhaltszusammenfassung zur Seite Nr. 16
Disposal 11 Disposal All electrical and electronic products should be disposed of separately from the municipal waste stream via designated collection facilities appointed by the government or the local authorities. This crossed-out wheeled bin symbol on the product means the product is covered by the European Directive 2002/96/EC. The correct disposal and separate collection of your old appliance will help prevent potential negative consequences for the environment and human health
Inhaltszusammenfassung zur Seite Nr. 17
Index 12 Index A O Adjusting OSD screen, 11 OSD language, 13 Auto adjust, 14 OSD menu, 11 B P Buttons, 8 PC setup, 14 Picture mode, 12 C Picture settings, 11 Color tone, 12 Power management, 9 Connections, 8 Power status, 8 I R Input signal, 8 Remote functions, 9 K Resetting, 13 Key lock, 13 S L Sound settings, 12 Language setup, 13 T M Troubleshooting, 15 Mounting, 10 W Mute, 12 Wall mount, 10 17 Building Technologies CMTC1713_1913 User Manual Fire Safety & Se
Inhaltszusammenfassung zur Seite Nr. 18
Issued by © 2008 Copyright Siemens Switzerland Ltd Technical specifications and availability subject to change without Siemens Building Technologies notice. Fire & Security Products GmbH & Co. oHG Siemensallee 84 D-76181 Karlsruhe www.buildingtechnologies.siemens.com Document ID A6V10230457 Edition 19/12/2008
