Inhaltszusammenfassung zur Seite Nr. 1
SyncMaster 760BF / 960BF
Inhaltszusammenfassung zur Seite Nr. 2
Notational Failure to follow directions noted by this symbol could result in bodily harm or damage to equipment. Prohibited Important to read and understand at all times Do not disassemble Disconnect the plug from the outlet Do not touch Grounding to prevent an electric shock Power When not used for extended period of time, set your computer to DPMS. If using a screen saver, set it to the active screen mode.
Inhaltszusammenfassung zur Seite Nr. 3
Do not use a damaged or loose plug. This may cause an electric shock or fire. Do not pull the plug out by the wire nor touch the plug with wet hands. This may cause an electric shock or fire. Use only a properly grounded plug and receptacle. An improper ground may cause electric shock or equipment damage. Insert the power plug firmly so that it does not come loose. A bad connection may cause fire. Do not excessively bend the plug and wire nor pla
Inhaltszusammenfassung zur Seite Nr. 4
Installation Be sure to contact an authorized Service Center when installing your set in a location with heavy dust, high or low temperatures, high humidity, and chemical substances, or where it will be operated for 24 hours continuously such as an airport, train station or etc. Failure to do so may cause serious damage to your set. Put your monitor in a location with low humidity and a minimum of dust. Failure to do so may cause an electric shock or fire inside the monit
Inhaltszusammenfassung zur Seite Nr. 5
Set down the monitor carefully. The monitor could be damaged or broken. Do not place the monitor face down. The TFT-LCD surface may be damaged. Installing a wall bracket must be done by a qualified professional. Installation by unqualified personnel may result in injury. Always use the mounting device specified in the owner's manual. When installing the product, make sure to keep it away from the wall (more than 10 cm/4 inch ) for ventilation purposes. Poor ven
Inhaltszusammenfassung zur Seite Nr. 6
Use the recommended detergent with a smooth cloth. If the connector between the plug and the pin is dusty or dirty, clean it properly with a dry cloth. A dirty connector may cause an electric shock or fire. Make sure to unplug the power cord before cleaning the product. Otherwise, this may cause electric shock or fire. Unplug the power cord from the power outlet and wipe the product using a soft, dry cloth. Do not use any chemicals such as wax, benzene, alcohol, thinn
Inhaltszusammenfassung zur Seite Nr. 7
If the monitor is dropped or the casing is damaged, turn the monitor off and unplug the power cord. Then contact the Service Center. The monitor may malfunction, causing an electric shock or fire. Disconnect the plug from the outlet during storms or lightening or if it is not used for a long period of time. Failure to do so may cause an electric shock or fire. Do not try to move the monitor by pulling only the wire or the signal cable. This may cause a breakdown, electri
Inhaltszusammenfassung zur Seite Nr. 8
Do not insert metal objects such as chopsticks, wire and gimlet or inflammable objects such as paper and match into the vent, headphone port or AV ports. It may cause a fire or an electric shock. If an alien substances or water flows into the product, turn the product off, unplug the power connector from the wall outlet and contact Service Center. If you view a fixed screen for an extended period of time, residual image or blurriness may appear. Change the mode to energy save o
Inhaltszusammenfassung zur Seite Nr. 9
eyesight damage. To ease eye strain, take at least a five-minute break after every hour of using the monitor. Do not install the product on an unstable, uneven surface or a location prone to vibrations. Dropping the product may cause damage to the product or personal injury. Using the product in a location prone to vibrations may shorten the lifetime of the product or may catch fire. When moving the monitor, turn off and unplug the power cord. Make sure that all cables, inclu
Inhaltszusammenfassung zur Seite Nr. 10
List of Features RTA Monitor RTA(Response Time Accelerator) A function that accelerates the response speed of the panel so as to provide a sharper and more natural video display. Implements deeper colors in contrast rates of 700:1 for Magic Contrast 760BF and 700:1 for 960BF. Provides a sharp image without causing an afterimage at a fast Magic speed of 4ms. Allows you to adjust the height up to 31 mm for the Magic Stand 760BF and 36 mm for the 960BF. When changing the monito
Inhaltszusammenfassung zur Seite Nr. 11
Manual User's Guide, Warranty Card Monitor Driver, Quick Setup Guide (Not available in all Natural Color software, locations) MagicTune™ software, MagicRotation software Cable 'DVI-A to D-Sub' Cable Power Cord DC-Adapter Sold separately DVI Cable Front
Inhaltszusammenfassung zur Seite Nr. 12
The blue light is on in its normal working condition and blinks when setting Power indicator / the adjustments of the monitor. Power button [ ] Use this button for power the monitor on and off, change the input source, or perform Auto Adjustment. : When you press the power button, the monitor is Power On/Off on/off. >>Click here to see an animation clip Input Source : When you press the power button until the power button blinks once with blue light, the input source may be ch
Inhaltszusammenfassung zur Seite Nr. 13
DC 14V Connect the DC adapter for your monitor to the power port on the back of the monitor. Plug the power cord for the monitor into a nearby outlet. DVI-I Connect the 'DVI-A to D-Sub' Cable to the DVI port on the back of your monitor. See Connecting the Monitor for further information regarding cable connections.
Inhaltszusammenfassung zur Seite Nr. 14
Connecting the Monitor 1. Connect the DC 14V adapter for your monitor to the power port on the back of the monitor. Plug the power cord for the monitor into a nearby outlet. 2-1. Using the D-Sub (analog) connector on the video card. Connect the 'DVI-A to D-Sub' Cable to the DVI-I port on the back of your monitor. 2-2. Connected to a Macintosh. Connect the monitor to the Macintosh computer using the 'DVI-A to D-Sub' connection cable. 2-3. In the case of an old model Macintosh, you
Inhaltszusammenfassung zur Seite Nr. 15
Using the Stand Pivot Stand Even when the monitor is completely folded, the monitor screen is still approximately 2 cm (0.8 inch) off the floor. Do not press the monitor screen further against the floor. This monitor cannot be installed with a supporting device (arm-support, wall bracket or other) other than the one provided. (When pivoting the monitor, rotation angle is displayed on screen of the monitor.) 0° 90° When pivoting the monitor, the corner of the monitor may reach
Inhaltszusammenfassung zur Seite Nr. 16
backward more than 45 degrees and then pivot it. Failure to do so may damage the monitor. Installing the Monitor Driver (Automatic) When prompted by the operating system for the monitor driver, insert the CD-ROM included with this monitor. Driver installation is slightly different from one operating system to another. Follow the directions appropriate for the operating system you have. Prepare a blank disk and download the driver program file at the Internet web site shown here. I
Inhaltszusammenfassung zur Seite Nr. 17
4. If you can see following message window, then click the "Continue Anyway" button. Then click "OK" button. This monitor driver is under certified MS logo,and this installation doesn't damage your system.The certified driver will be posted on Samsung Monitor homepage. http://www.samsung.com/. 5. Monitor driver installation is completed. Installing the Monitor Driver (Manual) Windows XP | Windows 2000 |Windows Me |Windows NT | Linux When prompted by the operating s
Inhaltszusammenfassung zur Seite Nr. 18
3. Click "Display" icon and choose the "Settings" tab then click "Advanced..". 4. Click the " " button on the " " tab and select " " tab. Properties Monitor Driver 5. Click "Update Driver.." and select "Install from a list or.." then click "Next" button. 6. Select "Don't search ,I will.." then click "Next" and then click "Have disk".
Inhaltszusammenfassung zur Seite Nr. 19
7. Click the "Browse" button then choose A:(D:\Driver) and choose your monitor model in the model list and click the "Next" button. 8. If you can see following message window, then click the "Continue Anyway" button. Then click "OK" button. This monitor driver is under certified MS logo,and this installation doesn't damage your system.The certified driver will be posted on Samsung Monitor homepage. http://www.samsung.com/ 9. Click the "Close" button then click "O
Inhaltszusammenfassung zur Seite Nr. 20
10. Monitor driver installation is completed. ® ® Microsoft Windows 2000 Operating System When you can see "Digital Signature Not Found" on your monitor, follow these steps. 1. Choose "OK" button on the "Insert disk" window. 2. Click the "Browse" button on the "File Needed" window. 3. Choose A:(D:\Driver) then click the "Open" button and then click "OK" button. How to install 1. Click "Start" , "Setting" , "Control Panel". 2. Double click the "Display" Icon. 3. C
