Inhaltszusammenfassung zur Seite Nr. 1
www.planar.com
PLANAR LCD MONITOR PQ150 MANUAL
Inhaltszusammenfassung zur Seite Nr. 2
Important Precautions This unit has been engineered and manufactured to ensure your personal safety, however improper use may result in electrical shock or fire hazards. In order to allow the proper operation of all safeguards incorporated in this display, observe the following basic rules for its installation, use, and servicing. On Safety Use only the power cord supplied with the unit. In case you use another power cord, make sure that it is certified by the applicable national standards if no
Inhaltszusammenfassung zur Seite Nr. 3
Important Precautions On Installation Do not allow anything to rest upon or roll over the power cord, and do not place the display where the power cord is subject to damage. Do not use this display near water such as near a bathtub, washbowl, kitchen sink, laundry tub, in a wet basement, or near a swimming pool. Displays are provided with ventilation openings in the cabinet to allow the release of heat generated during operation. If these openings are blocked, built-up heat can cause failures wh
Inhaltszusammenfassung zur Seite Nr. 4
Connecting the Display Before setting up the monitor, ensure that the power to the monitor, the computer system, and other attached devices is turned off. Unfolding the stand base 1. Lay the monitor on a cushion or piece of soft cloth with its front side facing upward. 2. Grasp the stand firmly with both hands as shown in the picture and unfold the base by swiveling it out. Significant force is required. Folding the stand base 1. Lay the monitor on a cushion or piece of soft cloth with its
Inhaltszusammenfassung zur Seite Nr. 5
Connecting the Display Using the Computer 1. Connect the signal cable. When attached, tighten the thumbscrews to secure the connection. 2. Connect the power cord into a proper power outlet that is easily accessible and close to the display. NOTE This is a simplified representation of the rear view. This rear view represents a general model; your display may differ from the view as shown. Signal Cable Power Cord Analog signal D-sub * * Varies according to model. Wall-outlet type* PC-outlet type*
Inhaltszusammenfassung zur Seite Nr. 6
Control Panel Functions Front Panel Controls Control Function Power Button Use this button to turn the display on or off. Power (DPMS) This Indicator lights up green when the display Indicator operates normally. If the display is in DPM (Energy Saving) mode, this indicator color changes to amber. Use this button to enter or exit the On Screen MENU Button Display. Use these buttons to choose or adjust items in Buttons the On Screen Display. SELECT/AUTO Use this button to enter a selection in th
Inhaltszusammenfassung zur Seite Nr. 7
Control Panel Functions Control Direct Access Function This function optimizes the brightness, contrast or color value to the surrounding conditions and settings and enables you to enjoy the most suitable picture by adjusting the surroundings (DAY/NIGHT/USER MODE). • TEXT: For viewing letters • MOVIE: For viewing movies • PHOTO: For viewing pictures or the photographs • USER MODE: This function memorizes the manual adjustment -Brightness, Contrast and Color value on the On Screen Display. 100
Inhaltszusammenfassung zur Seite Nr. 8
On Screen Display (OSD) Control Adjustment Screen Adjustment Making adjustments to the image size, position and operating parameters of the display is quick and easy with the On Screen Display Control system. A short example is given below to familiarize you with the use of the controls. The following section is an outline of the available adjustments and selections you can make using the OSD. NOTE Allow the display to stabilize for at least 30 minutes before making image adjustments. To make ad
Inhaltszusammenfassung zur Seite Nr. 9
On Screen Display(OSD) Selection and Adjustment The following table indicates all the On Screen Display control, adjustment, and setting menus. Main menu Sub menu Reference BRIGHTNESS BRIGHTNESS To adjust the brightness and CONTRAST contrast of the screen CONTRAST PRESET 9300K COLOR To customize the color of the screen 6500K R/G/B(User Color) GAMMA POSITION V POSITION To adjust the position of the screen H POSITION TRACKING CLOCK To improve the clarity and stability of the screen PHASE SETU
Inhaltszusammenfassung zur Seite Nr. 10
On Screen Display(OSD) Selection and Adjustment You were introduced to the procedure of selecting and adjusting an item using the OSD system. Listed below are the icons, icon names, and icon descriptions of the all items shown on the Menu. NOTE OSD (On Screen Display) menu languages on the monitor may differ from the manual. To adjust the brightness and contrast of the screen OSD Adjust Description BRIGHTNESS To adjust the brightness of the screen. CONTRAST To adjust the contrast of the scre
Inhaltszusammenfassung zur Seite Nr. 11
On Screen Display(OSD) Selection and Adjustment To improve the clarity and stability of the screen OSD Adjust Description CLOCK To minimize any vertical bars or stripes visible on the screen background.The horizontal screen size will also change. PHASE To adjust the focus of the display. This item allows you to remove any horizontal noise and clear or sharpen the image of characters. To customize the screen status for a user's operating environment OSD Adjust Description To choose the language
Inhaltszusammenfassung zur Seite Nr. 12
Troubleshooting Check the following before calling for service. No image appears No image appears Is the power cord of the Check and see if the power cord is connected display connected? properly to the power outlet. Is the power indicator Press the Power button. light on? Is the power on and the Adjust the brightness and the contrast. power indicator green? Is the power indicator If the display is in power saving mode, try moving amber? the mouse or pressing any key on the keyboard to bring up
Inhaltszusammenfassung zur Seite Nr. 13
Troubleshooting Display image is incorrect Display Position is Press the SELECT/AUTO button to incorrect. automatically adjust your display image to the ideal setting. If the results are unsatisfactory, adjust the image position using the H position and V position icon in the on screen display. Check Control Panel --> Display --> Settings and see if the frequency or the resolution were changed. If yes, readjust the video card to the recommend resolution. On the screen Press the SELECT/AUTO butt
Inhaltszusammenfassung zur Seite Nr. 14
Specifications Flat Panel Active matrix-TFT LCD Display 15 inches diag viewable, Anti-Glare coating, 0.3 mm pixel pitch Horizontal Viewing Angle: -60 to +60 deg typical Vertical Viewing Angle: -45 to +45 deg typical Horizontal Freq. 30 - 63kHz (Automatic) Sync Input Vertical Freq. 56 - 75Hz (Automatic) Input Form Separate TTL, Positive/Negative Signal Input 15 pin D-Sub Connector Video Input Input Form RGB Analog (0.7Vp-p/75ohm) Resolution Max VESA 1024 x 768@75Hz Recommend VESA 1024 x 768@60H
Inhaltszusammenfassung zur Seite Nr. 15
Specifications Preset Modes (Resolution) Display Modes (Resolution) Horizontal Freq. (kHz) Vertical Freq. (Hz) 1 VGA 640 x 350 31.468 70 2 VGA 720 x 400 31.468 70 3 VGA 640 x 480 31.469 60 4 VESA 640 x 480 35.000 66.67 5 VESA 640 x 480 37.861 72.8 6 VESA 640 x 480 37.500 75 7 VESA 800 x 600 35.156 56.25 8 VESA 800 x 600 37.879 60 9 VESA 800 x 600 48.077 72 10 VESA 800 x 600 46.875 75 11 MAC 832 x 624 49.725 75 *12 VESA 1024 x 768 48.363 60 13 VESA 1024 x 768 56.476 70 14 VESA 1024 x 768 60.023 7
Inhaltszusammenfassung zur Seite Nr. 16
PLANAR SYSTEMS, I NC. Customer Service support: http://planar.custhelp.com email: desktopmonitors@planar.com phone: 1-866-PLANAR-1 (1-866-752-6271) hours: M-F, 8am - 9pm EST © 2003 Planar Systems, Inc. Planar is a registered trademark of Planar Systems, Inc. Other brands and names are the property of their respective owners. Technical Information in this document is subject to change without notice. 06/03
