Inhaltszusammenfassung zur Seite Nr. 1
PT1545R / PT1545P
Touch Screen Monitor
USER’S GUIDE
www.planar.com
Inhaltszusammenfassung zur Seite Nr. 2
The information contained in this document is subject to change without notice. This document contains proprietary information that is protected by copyright. All rights are reserved. No part of this document may be reproduced,translated to another language or stored in a retrieval system, or transmitted by any means, electronic, mechanical, photocopying, recording, or otherwise, without prior written permission. Windows is a registered trademark of Microsoft, Inc. Other brand or product names
Inhaltszusammenfassung zur Seite Nr. 3
Table of Contents Usage Notice Precautions ............................................................................................................................ 1 Introduction About PT1545R/PT1545P ..................................................................................................... 2 Touch Screen for PT1545R .. ................................................................................................. 3 Touch Screen for PT1545P .. .................................
Inhaltszusammenfassung zur Seite Nr. 4
Usage Notice ! Warning - To prevent the risk of fire or shock hazards, do not expose this product to rain or moisture. ! Warning - Please do not open or disassemble the product as this may cause electric shock. Precautions Follow all warnings, precautions and maintenance as recommended in this user’s manual to maximize the life of your unit. Do: • Turn off the product before cleaning.
Inhaltszusammenfassung zur Seite Nr. 5
Introduction About PT1545R/PT1545P The PT1545R/PT1545P is a 15" flat panel screen with an active matrix, thin-film transistor (TFT) liquid crystal display (LCD). This unit is to be used as commercial and light industrial equipment only. Features include: • Direct Analog signal input • Active matrix TFT LCD technology • 1024 x 768 XGA resolution • 15" viewable display area • 31.5 ~ 60 KHz horizontal scan • 56 ~ 75 Hz high refresh rate • 0.297mm x 0.297mm pixel pitch • Auto adjustment fun
Inhaltszusammenfassung zur Seite Nr. 6
Touch Screen for PT1545R • 5-wire resistive touch screen for finger and stylus input • Surface: Anti-glare treatment • Interface: Dual RS-232 Serial/USB controller • Transmittance: 82%±5% • HID: Windows® 7/8 • Driver: Windows® 7/8, VISTA, XP, 2000, ME, 98, NT 4.0, CE, XP Embedded, Linux kernel 2.6.x (32 bit & 64 bit), Apple® Mac OS Touch Screen for PT1545P • Projected Capactive touch screen for finger input only • Surface: Glare treatment • Interface: USB controller • Transmitt
Inhaltszusammenfassung zur Seite Nr. 7
xxxxxxxxx / xxxxxxxxx xxxxxxxxx USER’S GUIDE www.planartouch.com Package Overview LCD Display Power Cord VGA Signal Cable USB Cable ( A to B) RS-232 Cable Audio-in Cable (PT1545R only) Landing Strip User’s Guide Cable Cover Screw 4
Inhaltszusammenfassung zur Seite Nr. 8
Installation Product Overview • Front View • PT1545R Bottom View (Without Stand) AUDIO AC IN RS-232 VGA USB POWER SWITCH • PT1545P Bottom View (Without Stand) AC IN VGA USB POWER SWITCH 5
Inhaltszusammenfassung zur Seite Nr. 9
Start Your Installation Please follow these instructions so that you can hookup the cables to associated connector. 1. Lay the display flat on an even surface. 2. Move the stand into position as seen in the step 2 diagram. 3. Remove the cable cover as seen in the step 3 diagram. 4. Connect the cables to the appropriate connectors as seen in the step 4 diagram. Use step 4-1 diagram if using the RS-232 serial connector. Use the step 4-2 diagram if using the USB connector. 5. Positio
Inhaltszusammenfassung zur Seite Nr. 10
Connecting the Display (Figure 8.1) To setup this display, please refer to the following figure and procedures. 1. Be sure all equipment is turned off. 2. Connect the AC power cord to the power connector on the monitor and the other end into an electrical outlet (8.1). 3. Connect the D-SUB cable from the display's VGA input connector to the D-SUB connector of your host computer and tighten the screws (8.1). 4. Connector the audio-in cable from the audio input port of your displa
Inhaltszusammenfassung zur Seite Nr. 11
(Figure 8.1) PT1545R PT1545P 8
Inhaltszusammenfassung zur Seite Nr. 12
Kensington Security Slot The monitor can be secured to your desk or any other fixed object with Kensington lock security products. The Kensington lock is not included. 9
Inhaltszusammenfassung zur Seite Nr. 13
VESA Mount Your Monitor This monitor conforms to the VESA Flat Panel Mounting Physical Mounting Interface standard which defines a physical mounting interface for flat panel monitors, and corresponding with the standards of flat panel monitor mounting devices, such as wall and table arms. The VESA mounting interface is located on the back of your monitor. To mount the monitor on an UL-listed swing arm or other mounting fixture, follow the instructions included with the mounting fixture to be
Inhaltszusammenfassung zur Seite Nr. 14
Remove the Deskstand Remove 4 screws and then remove hinge. 11
Inhaltszusammenfassung zur Seite Nr. 15
User Controls Side Panel Controls Icon Key Name Menu Up Down Enter Power OSD Menu off status Menu on status Key Menu appear Menu disappear/ return to main item Brightness Main item select up/ Adjust up Mute Main item select down/ Adjust down Enter/Select sub-item function Power On/Off 12
Inhaltszusammenfassung zur Seite Nr. 16
How to Use the OSD Menus Icon Key Name Menu Up Down Enter Power 1. Press the “MENU” button to pop up the “on-screen menu” and press “Up” or “Down” button to select among the six functions in the main menu. 2. Choose the adjustment items by pressing the “Enter ” button. 3. Adjust the value of the adjustment items by pressing the “Up” or “Down” button. 4. With the OSD menu on screen, press “ Menu” button to return main menu or exit OSD. 5. The OSD menu will automatically close, if you have
Inhaltszusammenfassung zur Seite Nr. 17
On-Screen Display Menus Main OSD Menu: ITEM CONTENT Contrast The monitor luminance level control. Brightness The monitor backlight level control. Auto Adjust Fine-tune the image to full screen automatically. Left/Right Moving screen image horizontal position to left or right. Up/Down Moving screen image vertical position to up or down. Horizontal size The screen image horizontal dot clock adjustment. Fine The screen image pixel phase adjustment. OSD Left/Right Moving OSD menu horizontal positio
Inhaltszusammenfassung zur Seite Nr. 18
Appendix Troubleshooting If you are experiencing trouble with the display, refer to the following. If the problem persists, please contact your local dealer or our service center. Problem: No image appears on screen. ► Check that all the I/O and power connectors are correctly and well connected described in the "Installation" section. ► Make sure the pins of the connectors are not crooked or broken. Problem: Partial Image or incorrect
Inhaltszusammenfassung zur Seite Nr. 19
Warning Signal If you see warning messages on your screen, this means that the display cannot receive a clean signal from the computer graphics card. Below are the three kinds of Warning Signal. Please check the cable connections or contact your local dealer or Planar for more information. No Signal This message means that the display has been powered on but it cannot receive any signal from the computer graphics card. Check all the power switches, power cables, and VGA sig- nal cable. Going
Inhaltszusammenfassung zur Seite Nr. 20
Product Dimensions PT1545R 350.8 mm ► Front View ► Side View 67.0 mm 222.5 mm ► Top View 17 196.1 mm 202.0 mm 275.9 mm 306.5 mm
