Inhaltszusammenfassung zur Seite Nr. 1
™
HDTV Monitor
HDTV Monitor
55PL9224
55PL9524
62PL9524
Highlights
• Liquid-crystal-on-silicon (LCOS) High-definition
Imaging
• High-resolution Display—1280 x 720 pixels
Features
• Digital Natural Motion™
• Active Control™—analyzes and adjusts incoming signal
•Two-tuner, Double-window PIP (Picture-in-Picture)
®
• Dolby Virtual Surround, 30-watt RMS
• 3D Y/C Comb Filter
• HD Component and DVI Input
• Side AV Convenience Jacks
• Matching stand and swivel available
Refer to the Quick Use and Setup
Inhaltszusammenfassung zur Seite Nr. 2
Return your Product Registration Card today to get the very most from your purchase. Registering your model with PHILIPS makes you eligible for all of the valuable benefits listed below, so don't miss out. Complete and return your Product Registration Card at once to ensure: *Proof of *Product Safety *Additional Benefits Purchase Notification of Product Ownership Returning the enclosed card guarantees By registering your product, you'll receive Registering your product guarantees that that you
Inhaltszusammenfassung zur Seite Nr. 3
IMPORTANT SAFETY INSTRUCTIONS Read before operating equipment 1. Read these instructions. B. Objects have fallen, or liquid has been spilled into the appli- ance; or 2. Keep these instructions. C. The appliance has been exposed to rain; or 3. Heed all warnings. D. The appliance does not appear to operate normally or 4. Follow all instructions. exhibits a marked change in performance; or 5. Do not use this apparatus near water. E. The appliance has been dropped, or the enclosure damaged. 6. Clean
Inhaltszusammenfassung zur Seite Nr. 4
Contents Setting the TV for Stereo Programming . . . . . . . . . . . . . . .43 INTRODUCTION Turning the AVL (Audio Volume Leveler) on or off . . . . . .44 Welcome/Registration of Your TV . . . . . . . . . . . . . . . . .2 Adjusting the Delta Volume . . . . . . . . . . . . . . . . . . . . . . . .45 Safety/Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3 Selecting an AutoSound™ Option . . . . . . . . . . . . . . . . . . .46 Features . . . . . . . . . . . . . . . . . . .
Inhaltszusammenfassung zur Seite Nr. 5
Features Compact design with low weight Items Included with This TV The unique Philips single-panel liquid-crystal-on-silicon (LCOS) technology allows for a large screen TV with a very low depth As you unpack your TV, please note the included items: and low weight. This TV will find a place in any living room • Quick Use and Setup Guide to help you set up your new TV. without occupying a large area, and it can be easily handled by • Directions for Use manual—contains information on safety, two p
Inhaltszusammenfassung zur Seite Nr. 6
Ways TV Signals Can Come to Your Home Over the Air TV Analog Digital Antenna Signal Signal at Y our Home Satellites Satellite TV Company Satellite Receiver Satellite at Y our Home Satellite Dish Home Telephone Line For Direct Connection Cable TV to Your TV or to a Company Cable Box, VCR, or Cable Satellite Receiver Cable TV Signal (Analog) Your High-definition-ready Set DVD619 DVD/CD PLAYER OPEN/CLOSE STOP PLAY PAUSE GUIDE STANDBY-ON POWER SELECT POWER PREV NEXT INFO HIGH DEFINITION High-defi
Inhaltszusammenfassung zur Seite Nr. 7
Descriptions of Jacks, Cables, and Connectors Antenna RF Jack Tuner (RF) Input Jack This page contains descriptions and illustrations of jacks, cables, Cable Used: RF Cables used: RF coaxial cable (75 Ω) and connectors you might use in making connections. The cables Coaxial (75 Ω) Allows you to connect an antenna, cable TV, and connectors are not supplied with your TV, but you can pur- TUNER or components having RF outputs to the chase at your electronics dealer. Or you can order them by calling
Inhaltszusammenfassung zur Seite Nr. 8
Panel Jack Compatibility Information AV 1 Input Jacks Signals accepted: NTSC (480i). 1 Inputs available: YPbPr, S-Video (Y/C), and CVBS, plus audio left and right. Use only one of the video signal inputs at a time. 1 DVI G S-VIDEO If you should forget and have more than one type of 9 signal connected, the set will automatically show the RL V one of better quality: CVBS—good, S-Video—bet- ter, and YPbPr—best. For sound, connections must 2 be made to the AV1 audio inputs. Pr Pb Y MON OUT Output J
Inhaltszusammenfassung zur Seite Nr. 9
Pre-connection Recommendations Positioning the TV Situate the TV where Before connecting accessory devices—VCR, it will not be exposed DVD player, or HD satellite receiver, for exam- ple—please keep the following in mind: to heat or moisture. • Place the TV on a flat surface. An unlevel sur- For safety, do not face may adversely affect picture perform- set objects on top ance. of the TV. • Do not place the TV on shag carpet or any surface that will block the ventilation open- ings at the bottom
Inhaltszusammenfassung zur Seite Nr. 10
Connecting a VCR Connect the incoming antenna or cable Back of TV TV signal to the ANT IN jack on the 1 back of the VCR. DVI G S-VIDEO RL V Using a coaxial cable, connect to the OUT jack on the back of the VCR and Pr Pb Y 2 3 RL V to the TUNER jack on the back of the RL Incoming Cable TV TV. or Antenna Signal RL RL V G S-VIDEO Using A/V cables, connect from the RGB+HV AUDIO and VIDEO OUT jacks on the 3 2 back of the VCR to the corresponding Pr Pb Y RL STANDARD/ HD INPUTS AV2 audio (L and R) and
Inhaltszusammenfassung zur Seite Nr. 11
Connecting a VCR and Cable Box NOTE: A cable box with AUDIO OUT jacks Incoming Back of TV Cable TV such as the one used in the example on this Signal page might pass stereo sound to the TV. Check with your cable TV company. The RF jack out- DVI G S-VIDEO put jack on a cable box (commonly labeled 1 RL V “OUT TO TV,” “OUTPUT,” or “OUT”) will not pass stereo sound to your TV. Signal Pr Pb Y 5 Splitter RL V RL Connect the incoming cable TV signal to a two-way signal splitter. The signal RL 1 RL V sp
Inhaltszusammenfassung zur Seite Nr. 12
Connecting an S-Video Device Using an S-Video cable, connect to the Back of TV S-Video output on the back of the 1 S-Video device and to the AV2 S- DVI G S-VIDEO VIDEO input. RL V Using Stereo Audio cables, connect to the AUDIO OUT jacks on the back of Pr Pb Y 2 RL V the RL 2 S-Video device and to the correspon- RL RL V ding AV2 audio inputs (L and R). G S-VIDEO RGB+HV Press the AV+ button on the remote control to access the Source list. 3 1 Pr Pb Y RL STANDARD/ HD INPUTS TUNER Press the Curso
Inhaltszusammenfassung zur Seite Nr. 13
Connecting a Standard DVD Player Using Audio/Video cables, connect to Back of TV the YPbPr jacks on the back of the 1 standard DVD player and to the AV1 2 DVI G YPbPr jacks on the back of the TV. S-VIDEO RL V 1 Using Stereo Audio cables, connect to the AUDIO OUT jacks on the back of Pr Pb Y 2 RL V the DVD player and to the correspon- RL ding AV1 audio (L and R) jacks on the RL RL V back of the TV. G S-VIDEO RGB+HV Press the AV+ button on the remote control to access the Source list. 3 Pr Pb Y
Inhaltszusammenfassung zur Seite Nr. 14
Connecting a Progressive-scan DVD Player Using Audio/Video cables, connect to Back of TV the YPbPr jacks on the back of the pro- 1 gressive-scan DVD player and to the DVI G S-VIDEO AV3 or AV4 YPbPr jacks on the back of RL V the TV. Using Stereo Audio cables, connect to Pr Pb Y RL V RL the AUDIO OUT jacks on the back of 2 the DVD player and to the correspon- RL RL V ding AV3 or AV4 audio (L and R) jacks G S-VIDEO on the back of the TV. RGB+HV 1 2 If your DVD player has an I/P switch Pr Pb Y RL S
Inhaltszusammenfassung zur Seite Nr. 15
Connecting an HD Satellite Receiver to YPbPr Using Component Video cables, con- Back of TV nect to the YPbPr jacks on the back of 1 the HD satellite receiver and to the cor- DVI G S-VIDEO responding AV3 or AV4 YPbPr jacks RL V on the back of the TV. Using Stereo Audio cables, connect to Pr Pb Y RL V the AUDIO OUT jacks on the back of RL 2 the HD satellite receiver and to the cor- RL RL V responding AV3 or AV4 audio (L and G S-VIDEO R) jacks on the back of the TV. RGB+HV Refer to the user manua
Inhaltszusammenfassung zur Seite Nr. 16
Connecting an HD Satellite Receiver to DVI Using a DVI cable, connect to the DVI Back of TV jack on the back of the HD satellite 1 1 receiver and to the corresponding AV6 DVI DVI jack on the back of the TV. G S-VIDEO RL V Using Stereo Audio cables, connect to 2 the AUDIO OUT jacks on the back of Pr Pb Y 2 RL V the HD satellite receiver and to the RL corresponding AV6 audio (L and R) RL RL V jacks on the back of the TV. G S-VIDEO Refer to the user manual for the HD RGB+HV satellite receiver to c
Inhaltszusammenfassung zur Seite Nr. 17
Connecting Surround Sound Equipment Using Stereo Audio cables, connect to Back of TV the MON OUT L and R jacks on the 1 back of the TV and to the correspon- ding TV IN jacks on the back of the receiver. Using an Audio cable, connect to the SUB OUT jack on the back of the TV 2 and to the Audio Input jack on the DVI G S-VIDEO RL V Pr Pb Y RL V RL back of a powered subwoofer. RL RL V G S-VIDEO RGB+HV RL Pr Pb Y ST HD INPUTS ANDARD/ TUNER Pr Pb Y ST HD INPUTS ANDARD/ RL Using speaker wires, connect
Inhaltszusammenfassung zur Seite Nr. 18
Connecting to the Side Inputs:Video Game System Using the Audio/Video cable supplied with your video game system, connect 1 to the back of the game system and to the corresponding S-VIDEO and AUDIO (L and R) jacks in the Side Panel on panel of the TV. Side of NOTE: If your game system cable TV does not have an S-Video plug, you can instead make a regular Video connection. 1 Press the Source button on the TV remote control to access the Source 2 list. Press the Cursor Up or Down button to select
Inhaltszusammenfassung zur Seite Nr. 19
Labeling the Audio/Video Input Sources You can label all the external Audio/Video Picture Sound Features Channels input sources—AV1, AV2, AV3, AV4, AV5, TV AV6, and Side—according to the type of Settings accessory device you have connected to each TV Demo General Clock Source input. Settings Install Demo After labeling, you can use the Source button Install to cycle through and select your desired source. The labels will appear alongside the channel indicator when you select the AV in
Inhaltszusammenfassung zur Seite Nr. 20
Remote Control Buttons Select (CBL VCR DVD SAT AMP) and Backlight Press this button to cycle across the accessory mode dial. Stop pressing when the mode you desire is lighted. The light will stay on for 2 seconds and then begin blinking to indicate the remote is in your desired mode. As long as the button blinks, the remote is in the accessory mode. (See pages 22–25 for programming the remote) Pressing and holding the Select button for 2 seconds backlights the remote control buttons. The button
