Inhaltszusammenfassung zur Seite Nr. 13
Initial selections Selecting the input signal Select the input signals to be connected by installing the optional Terminal Boards. Press to select the input signal to be played back from the equipment which has been connected to the Display. Input signals will change as follows: INPUT1 INPUT2 INPUT3 PC Notes: • Selecting is also possible by pressing the INPUT button on the unit. • Input terminal will not be selected if the terminal board is not installed into the SLOT. • Select to match the si
Inhaltszusammenfassung zur Seite Nr. 14
Basic Controls Main Power On / Off Switch POWER – INPUT MENU / +/ ENTER/ VOL Enter / Aspect button This button is locked by initial setting. (see page 16, 20) INPUT button (INPUT1, INPUT2, INPUT3 and PC selection) (see page 13) Volume Adjustment Volume Up “+” Down “–” MENU Screen ON / OFF When the menu screen is displayed: This button is locked by initial setting. “+” : press to move the cursor up Each time the MENU button is pressed, the “–” : press to move the cursor down menu screen wil
Inhaltszusammenfassung zur Seite Nr. 15
Basic Controls Remote Control Transmitter The remote control is not SURROUND button included with this set. Available The surround setting switches on and off each time for purchase separately. the SURROUND button is pressed. ON OFF The benefi ts of surround sound are enormous. You Object model : N2QAYB000178 can be completely enveloped in sound; just as if you were at a concert hall or cinema. Note: The surround settings are memorized separately SURROUND ON for each AUDIO MENU (STANDARD, DY
Inhaltszusammenfassung zur Seite Nr. 16
ASPECT Controls The Display will allow you to enjoy viewing the picture at its maximum size, including wide screen cinema format picture. Press repeatedly to move through the aspect options: For details about the aspect mode, please see “List of Aspect Modes” (page 40). For VIDEO (S VIDEO) signal input: 4:3 ZOOM Panasonic AUTO JUST FULL Note: [from the unit] When selecting an input slot that attaches BNC Dual Video Terminal Board (TY-FB9BD), Panasonic AUTO cannot be selected. INPUT MENU –/▼ +/
Inhaltszusammenfassung zur Seite Nr. 17
ASPECT Controls For PC signal input: 4:3 Zoom 16:9 For SD signal input (525 (480) / 60i • 60p, 625 (575) / 50i • 50p): 4:3 Zoom1 Zoom2 Zoom3 16:9 14:9 Just For HD signal input [1125 (1080) / 60i • 50i • 60p • 50p • 24p • 25p • 30p • 24sF, 1250 (1080) / 50i, 750 (720) / 60p • 50p]: 4:3 Full Zoom1 Zoom2 Zoom3 16:9 14:9 Just1 Just2 4:3 (1) 4:3 (2) MULTI PIP Press repeatedly. Each time pressing this button main picture and sub picture will be displayed as follows below. [Picture and Picture] [Pictur
Inhaltszusammenfassung zur Seite Nr. 18
MULTI PIP Advanced PIP 1 Set “Advanced PIP” to “On” in Options menu. (see page 35) 2 Press repeatedly. Each time pressing this button main picture and sub picture will be displayed as follows. One screen Advanced PIP 1 2 3 4 Sub screen Main screen 8 7 6 5 Notes: • To use , , , buttons for the screen operations, follow the procedures in the previous page. • , and buttons are invalid during Advanced PIP operation. Notes: • If “INPUT lock” in Options menu is set to other than “Off”, MULTI PIP fun
Inhaltszusammenfassung zur Seite Nr. 19
Digital Zoom This displays an enlargement of the designated part of the displayed image. Display the operation guide. 1 EXIT Press to access Digital Zoom. The operation guide will be displayed. 1 During Digital Zoom, only the following buttons can be operated. [Unit] [Remote control] SURROUND button INPUT MENU –/▼ +/▲ ENTER/■ VOL OFF TIMER button VOL button VOL button MUTE button POSITION / ACTION button Select the area of the image to be enlarged. 2 Press on the enlargement location to select
Inhaltszusammenfassung zur Seite Nr. 20
On-Screen Menu Display Remote Control Unit MENU Display the menu screen. Press several times. 1 Each time the MENU button is pressed, the menu Press to select. screen will switch. (Example: PICTURE menu) Normal Viewing PICTURE SOUND POS. /SIZE SET UP Select the item. 2 PICTURE 1/2 Select. Select. NORMAL NORMALIZE PICTURE MENU STANDARD –/▼ +/▲ ENTER/■ Press. 25 BACKLIGHT PICTURE 25 BRIGHTNESS 0 COLOR 0 0 TINT SHARPNESS 5 (Example: PICTURE menu) Set. Set. Set. 3 – ENTER/■ /▼ +/▲ Press. ME
Inhaltszusammenfassung zur Seite Nr. 1
Operating Instructions
High Defi nition Hospitality LCD Display
Model No.
TH-32LR11UK
TH-32LR11UH
The illustration shown is an image.
Before connecting, operating or adjusting this product, please read these instructions completely.
Please keep this manual for future reference.
English
Inhaltszusammenfassung zur Seite Nr. 2
CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN WARNING: To reduce the risk of electric shock, do not remove cover or back. No user-serviceable parts inside. Refer servicing to qualifi ed service personnel. The lightning flash with The exclamation point within arrow-head within a triangle a triangle is intended to is in tended to tell the user tell the user that important that parts inside the product operating and servicing are a risk of electric shock instructions are in the papers to per sons.
Inhaltszusammenfassung zur Seite Nr. 3
Important Safety Instructions 1) Read these instructions. 2) Keep these instructions. 3) Heed all warnings. 4) Follow all instructions. 5) Do not use this apparatus near water. 6) Clean only with dry cloth. 7) Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. 8) Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifi ers) that produce heat. 9) Do not defeat the safety purpose o
Inhaltszusammenfassung zur Seite Nr. 4
Dear Panasonic Customer Welcome to the Panasonic family of customers. We hope that you will have many years of enjoyment from your new LCD Display. To obtain maximum benefit from your set, please read these Instructions before making any adjustments, and retain them for future reference. Retain your purchase receipt as well, and record the model number and serial number of your set in the space provided on the rear cover of these instructions. Table of Contents Important Safety Instructions .
Inhaltszusammenfassung zur Seite Nr. 5
FCC STATEMENT This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee tha
Inhaltszusammenfassung zur Seite Nr. 6
Safety Precautions CAUTION This LCD Display is for use only with the following optional accessories. Use with any other type of optional accessories may cause instability which could result in the possibility of injury. (All of the following accessories are manufactured by Panasonic Corporation.) • Wall-hanging bracket (angled) ..................................................TY-WK32GRW • BNC Component Video Terminal Board ....................................TY-42TM6A • BNC Composite Video Te
Inhaltszusammenfassung zur Seite Nr. 7
Safety Precautions / Maintenance WARNING Do not handle the power cord plug with wet hands. Setup • Doing so may cause electric shocks. Do not place the Display on sloped or unstable surfaces. Do not do anything that might damage the power cable. • The Display may fall off or tip over. When disconnecting the power cable, hold the plug, not the cable. Do not place any objects on top of the Display. • Do not make any modifi cations, place heavy objects on, • If water spills onto the Display or
Inhaltszusammenfassung zur Seite Nr. 8
Accessories Accessories Supplied Check that you have the Accessories and items shown Operating Instruction book CD-ROM (Operating instructions) The remote control is not included with this set. Available for purchase separately. Object model : N2QAYB000178 Location Place the display at a comfortable distance for viewing. Avoid placing it where sunlight or other bright light (including refl ections) will fall on the screen. Use of some types of fl uorescent lighting can reduce remote control tran
Inhaltszusammenfassung zur Seite Nr. 9
Accessories Preparation for Wall-hanging Before mounting the display on the wall, you must remove the pedestal from the display. Follow the steps below: A Disconnect all the cables from the display. 1 Remove the pedestal. 2 A Remove four screws B B Pull out the pedestal Foam mat or thick soft cloth A WARNING Failure to use a Panasonic bracket or choosing to mount the unit yourself will be done at the risk of the consumer. • Any damage resulting from not having a professional installer mount wi
Inhaltszusammenfassung zur Seite Nr. 10
Connections PC Input Terminals connection (Female) COMPUTER AUDIO PC IN Conversion adapter (if necessary) Mini D-sub 15p RGB PC cable (Male) Audio Stereo plug Connect a cable which matches the audio output terminal on the computer. Notes: • Computer signals which can be input are those with a horizontal scanning frequency of 15 to 110 kHz and vertical scanning frequency of 48 to 120 Hz. (However, the image will not be displayed properly if the signals exceed 1,200 lines.) • The display resol
Inhaltszusammenfassung zur Seite Nr. 11
Connections SERIAL Terminals connection The SERIAL terminal is used when the Display is controlled by a computer. (Male) COMPUTER 13 2 45 67 8 9 SERIAL RS-232C Straight cable Pin layout for SERIAL Terminal (Female) D-sub 9p Notes: • Use the RS-232C straight cable to connect the computer to the Display. • The computer shown is for example purposes only. • Additional equipment and cables shown are not supplied with this set. Signal names for D-sub 9P connector Pin No. Details The SERIAL terminal
Inhaltszusammenfassung zur Seite Nr. 12
Power ON / OFF Connecting the plug to the Wall Outlet. Press the Power switch on the Display to turn the set on: Power-On. Power Indicator: Green POWER Power Indicator Remote Control Sensor Press the button on the remote control to turn the Display off. Power Indicator: Red (standby) Press the button on the remote control to turn the Display on. Power Indicator: Green Turn the power to the Display off by pressing the POWER switch on the unit, when the Display is on or in standby mode. Note:
