Inhaltszusammenfassung zur Seite Nr. 1
PlasmaSync 3300 Multimedia Monitor
NEC Technologies, Inc.
MultiSync is a registered trademark of NEC Technologies, Inc. in the U.S.A. 1250 N. Arlington Heights Road, Suite 500
Printed in Japan
NEC is registered trademark of NEC Corporation.
1993 by NEC Technologies, Inc. Itasca, Illinois 60143-1248
78xxxxxxx
PlasmaSync 3300 Multimedia Monitor
PlasmaSync
User's Manual
Inhaltszusammenfassung zur Seite Nr. 2
DOC compliance Notice CAUTION This Class A digital apparatus meets all requirements of the Canadian RISK OF ELECTRIC SHOCK Interference-Causing Equipment Requlations. DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO WARNING NOT REMOVE COVER. NO USER-SERVICEABLE This equipment has been tested and found to comply with the limits for PARTS INSIDE. REFER SERVICING TO QUALIFIED a Class A digital device, pursuant to Part 15 of the FCC Rules. These SERVICE PERSONNEL. limits are designe
Inhaltszusammenfassung zur Seite Nr. 3
DOC avis de conformation ATTENTION Cet appareil numérigue de la classe A respecte toutes les exigences du RISQUE D’ELECTROCUTION Réglement sur le Matériel Brouilleur du Canada. NE PAS OUVRIR MISE EN GARDE: AFIN DE REDUIRE LES RISQUES D’ELECTRO- CUTION, NE PAS DEPOSER LE COUVERCLE, IL N’Y A AUCUNE PIECE UTILISABLE A L’INTERIEUR DE CET APPAREIL. NE CONFIER LES TRAVAUX D’ENTRETIEN QU’A UN PERSONNEL QUALIFIE. Ce symbole a pour but de prévenir l’utilisateur de la présence d’une tension dangereuse, n
Inhaltszusammenfassung zur Seite Nr. 4
CONTENTS Introduction ......................................................................................................................... 1 Introduction to the PlasmaSync 3300...................................................................................... 1 Feature Highlights ...................................................................................................................... 1 Part Names and Functions .................................................................
Inhaltszusammenfassung zur Seite Nr. 5
1 OSM and IPM are trademarks of NEC Technologies, Inc. Feature Highlights IBM PC/AT, PS/2 and VGA are registered trademarks of International The OSM (On Screen Manager) controls have made the monitor' s Digital Business Machines Corporation. Control System easier to use by providing menus on screen. Pressing the PROCEED key turns on OSM. You' ll find it easy to navigate through the Apple and Macintosh are registered trademarks of Apple Computer, menu that appears, and icons show you how the con
Inhaltszusammenfassung zur Seite Nr. 6
aa 3 Part Names and Functions Front View a aaaaaaaaa a a a VIDEO 1/VIDEO 2/RGB 1/RGB 2/PROCEED/EXIT 98 4 76 5 32 1 1 POWER .............................. Press to power the monitor on and off. 8 VIDEO 2 ................................... Press to select the video source that is connected to the VIDEO 2 input terminal 2 STANDBY /POWER ............ Lights green during normal operation. Indicator (BNC type or S-VIDEO 2 IN). Lights orange when the monitor is in standby 9 VIDEO 1 ...................
Inhaltszusammenfassung zur Seite Nr. 7
5 Terminal Board 0 OPEN ON 4 3 2 1 “ 5 10 9 8 7 6 15 14 13 12 11 12 3 4 5 6 7 8 SHORT B A 5 4 3 2 1 OPEN 10 9 8 7 6 15 14 13 12 11 ON “ 12 3 4 5 6 7 8 SHORT aaaaaaa aaaaaaaaaaaaaaaaaa C 0 EXTERNAL CONTROL EXTERNAL CONTROL IN (mini D-SUB 15 PIN).....This terminal is used when power ON/OFF, input selection, AUDIO MUTE and PICTURE MUTE are operated externally (by external control). See also page 41 for external con- trol port pin assignments. NOTE: Select EXT. CONTROL ON by setting pin No. 7 of
Inhaltszusammenfassung zur Seite Nr. 8
7 aaaaaa aaaaaaaaaaaaaaaaaaa D 4 3 2 1 5 10 9 8 7 6 15 14 13 12 11 F E 4 3 2 1 5 10 9 8 7 6 15 14 13 12 11 D VIDEO 2 E RGB 1 VIDEO 2 IN (BNC type).....Connect the video source' s output here. Mini D-SUB 15 PIN IN.....A15 Pin Analog RGB 1 input terminal compatible S-VIDEO 2 IN.....Connect the S-video source with an S-connector output with computers that have a VGA/S-VGA/XGA output signal. here. D-SUB 15 PIN THROUGH OUT.....Connect to an RGB INPUT terminal on an- THROUGH OUT (BNC type).....Connec
Inhaltszusammenfassung zur Seite Nr. 9
9 a a a aaaaaaaaaaaaa a a aaaaaaaaa J H I G G RGB 2 R, G, B, H/CS and V IN (BNC).....These are analog RGB input terminals. Connect external components with R, G, B, H/CS, and V output terminals to these analog RGB input terminals. Be sure that the RGB connection cable is correctly attached to the corresponding terminals. R, G, B, H/CS and V THROUGH OUT (BNC)..... Connect to a second monitor's RGB inputs to relay the RGB signal inputs at R, G, B, H/CS and V IN. 75 Ω/HIGH Impedance Select Switchs
Inhaltszusammenfassung zur Seite Nr. 10
11 Remote Control Unit 3 ON POWER OFF DEGAUSS 1 4 VIDEO1VIDEO2 RGB1 RGB2 2 5 WIDTH ON 1 POWER ON/OFF ................ Press POWER ON to turn the monitor on when the STANDBY/POWER indicator is lit HEIGHT POSITION/CONTROL OFF orange. SIDE PIN Press POWER OFF to turn the monitor off 6 and the monitor will go into the standby condi- SCAN SELECT tion. NORMAL RASTER CONTROL 2 VIDEO 1 .............................. Press to select reception of a conventional 7 component or S-connector component con-
Inhaltszusammenfassung zur Seite Nr. 11
13 Visual Control I 8 RGB/VIDEO CONTRAST ( / Ä ) ......... Adjusts the image brightness in relation to the background. Press and hold for higher contrast. ON POWER OFF DEGAUSS Press and hold Ä for lower contrast. VIDEO1VIDEO2 RGB1 RGB2 9 RGB/VIDEO BRIGHT ( / Ä ) .............. Adjusts the overall image and screen bright- WIDTH ON ness. HEIGHT POSITION/CONTROL OFF Press and hold for a brighter picture. H Press and hold Ä for a darker picture. SIDE PIN VIDEO 0 COLOR ( / Ä
Inhaltszusammenfassung zur Seite Nr. 12
15 Battery Installation and Replacement The remote control is powered by two 1.5V AA batteries. To install or replace batteries: 1.Turn the remote control unit upside down. 2.Press down on the battery compartment grip and slide the com- partment in the direction of the arrow. 3.Install the two new batteries, making sure that their polarity matches the (+) (-) diagrams inside the battery compartment. In- correct polarity could damage the unit. 4.Close the battery compartment cover. | {
Inhaltszusammenfassung zur Seite Nr. 13
17 Functions of DIP SW Functions and Settings of DIP SW 1 This DIP switch sets various conditions of the monitor. Not Used No.4 POWER ON MODE SET No.1 No.2 DIP SWITCH MODE ON : On Screen display ON No.3 No.5 No.1 No.2 No.3 OFF : On Screen display OFF DEFEAT OFF --- --- Not Used VIDEO 1 No.6 ON OFF OFF VIDEO 2 ON ON OFF RGB 1 ON OFF ON No.7 ON : External control ON RGB 2 ON ON ON OFF : External control OFF No.8 ON : Wireless remote control ON OFF : Wireless remote control OFF Pin numbers 4 and
Inhaltszusammenfassung zur Seite Nr. 14
19 Functions and Settings of DIP SW 2 This DIP switch is used for Sync. Control and Intelligent Power Manager. Set all pins to the OFF position except No. 3 pin during normal operation. ON: Auto selection for video standard No.1 SYNC. CONTROL No.3 OFF: Manual selection for video standard No.2 DIP SWITCH ON: Manually selecting PAL No.4 MODE OFF: Manually selecting NTSC No.1 No.2 ON: Manually selecting SECAM AUTO CONTROL OFF OFF No.5 OFF: Manually selecting other (Sep, Comp, Sync on G) ON: Manua
Inhaltszusammenfassung zur Seite Nr. 15
21 Installation External Component Connections Video Signal Connections The NEC PlasmaSync 3300 multimedia monitor is designed for convenient VIDEO 1 INPUT Connections installation with a wide variety of audio, the latest video components and many 1. Connect the external component video output to VIDEO 1 IN. data processing devices equipped with analog RGB output. 2. Connect the external component mono audio or stereo left channel audio output to L AUDIO (MONO). BNC jack terminals (VIDEO 1 and V
Inhaltszusammenfassung zur Seite Nr. 16
23 RGB Signal Connections RGB 1 INPUT Connections 2. Set all the 75Ω/HIGH impedance select switches on all but the last monitor Mini D-SUB 15 Pin RGB Connector. to “HIGH” position. On only the last monitor set all of them to “75Ω” position. 1. Connect external components or computers having RGB output to the mini D-SUB 15-Pin connector. 2. Connect the external RGB component mono audio or stereo left channel audio output to L RGB AUDIO IN (MONO). 3. Connect the external RGB component stereo righ
Inhaltszusammenfassung zur Seite Nr. 17
25 Typical Connection Example To EXTERNAL CONTROL (mini D-SUB 15 Pin input) PlasmaSync 3300 EXTERNAL IBM PC OR COMPATIBLES CONTROL To VIDEO IN R, L, inputs To mini D-SUB 15 Pin input CAMERA, VIDEO COPY STAND OR MULTIMEDIA APPLICATION RGB equipment To R,G,B,H/CS and V inputs (BNC) NEC MULTISYNC OR PC-COMPATIBLE MONITOR NOTE: •PlasmaSync 3300 does not support PAL/SECAM on a scan converter. •We do not recommend to use a scan converter for NTSC signal. A use of the scan converter degrades picture q
Inhaltszusammenfassung zur Seite Nr. 18
27 External Speaker Connections External speakers may be connected to the monitor to reproduce sound from SPEAKER SELECT VIDEO 1, VIDEO 2, RGB 1 or RGB 2 signal sources. INT EXT External speakers may be connected directly to the EXTERNAL SPEAKERS 4 ft. 4 ft. terminals or indirectly by connecting a stereo system amplifier to the audio RIGHT LEFT 120cm 120cm outputs. CAUTION: Unplug the monitor and all connected components before con- necting external speakers. Use only speakers with 8-ohm imped
Inhaltszusammenfassung zur Seite Nr. 19
29 Controls/Adjustments Power Video Signal Input Settings 1. Plug in the power cord to an electrical outlet to connect power. Video Input Selection 2. Press POWER to turn the monitor on. Press the desired input selection key (VIDEO 1 or VIDEO 2) on the remote 3. Press POWER again to turn the monitor off. control unit or the monitor. Press the POWER OFF key on the remote control unit to turn the monitor NOTE: During VIDEO input, set the 75Ω/HIGH switch to “75Ω” if VIDEO off when the monitor is tu
Inhaltszusammenfassung zur Seite Nr. 20
31 TM RGB Signal, Picture Adjustments OSM Controls 1. a)Adjust the contrast of RGB display. b)Adjust the brightness of RGB display. NEC's new OSM, or On-Screen Manager, System offers the ultimate form of 2. Adjust the picture position. monitor controls. Keys on the remote control unit allow you to easily navigate See “Signal Identification Flowchart” on pages 43 and 44. through menus and adjust controls. As you chose controls, the moving icon NOTE: To reset the stored adjustment data and reca
