Inhaltszusammenfassung zur Seite Nr. 1
User's Manual
MultiSync LCD1770V
MultiSync LCD1770NX
MultiSync LCD1770NXM
Inhaltszusammenfassung zur Seite Nr. 2
Index Warning .................................................................................................................... 1 Contents ................................................................................................................. 2 Sound bar Setup ................................................................................................... 3 Display Setup ......................................................................................................... 4 Mo
Inhaltszusammenfassung zur Seite Nr. 3
WARNING TO PREVENT FIRE OR SHOCK HAZARDS, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE. ALSO, DO NOT USE THIS UNIT'S POLARIZED PLUG WITH AN EXTENSION CORD RECEPTACLE OR OTHER OUTLETS UNLESS THE PRONGS CAN BE FULLY INSERTED. REFRAIN FROM OPENING THE CABINET AS THERE ARE HIGH VOLTAGE COMPONENTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. CAUTION CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, MAKE SURE POWER CORD IS UNPLUGGED FROM WALL SOCKET. TO FULLY DISENGAGE THE POWER TO THE UNIT, PL
Inhaltszusammenfassung zur Seite Nr. 4
Contents ® Your new NEC MultiSync LCD monitor box* should contain the following: • MultiSync LCD1770V, LCD1770NX, or LCD1770NXM monitor with height adjustable stand • Power Cord • User’s Manual • Video Signal Cable • Cable Management Cover • USB Cable (NX/NXM only) • Audio Cable (NXM only) • Sound bar (NXM only) • Thumbscrews x 2 (NXM only) Power Cord Video Signal Cable Cable Management Cover Sound bar (NXM only) Thumbscrews User's Manual MultiSync LCD1770V MultiSync LCD1770NX (NXM only) Mul
Inhaltszusammenfassung zur Seite Nr. 5
Sound bar Setup To attach the Sound bar to your LCD1770NXM, follow these instructions. Note: this setup is only for the LCD1770NXM. If you have purchase an LCD1770V or LCD1770NX, please move to the next page. 1.Turn off the computer. 2. Place hands on each side of the display to tilt up the panel and then lift up to the highest position. 3.Use the two thumb screws included to attach the Sound bar to the display (Figure SB.1). 4.Turn the volume control down on the Soundbar (Figure SB.2). 5.Connec
Inhaltszusammenfassung zur Seite Nr. 6
Display Setup ® To attach the MultiSync LCD monitor to your system, follow these instructions: 1. Turn off the power to your computer. 2. For the PC or MAC with DVI digital output (NX and NXM only): Connect the DVI signal cable (not included) to the connector of the display card in your system (Figure 1). Tighten all screws. For the PC with Analog output: Connect the 15-pin mini D-SUB signal cable to the connector of the display card in your system (Figure 2). Tighten all screws. For MAC setup:
Inhaltszusammenfassung zur Seite Nr. 7
Display Setup –continued Figure 1 Figure 2 Figure 3 DVI Signal Cable Macintosh Cable Adapter (not included) (not included) Note: Some Macintosh systems do not require a Macintosh Cable Adapter (NX and NXM only) 30˚ Tilt Figure 4 Figure 5 DVI Cable (Top) Highest Stand Position Power Cable (Middle) Audio Cable (Bottom) (NMX only) DVI Cable Figure 6 DVI Cable Power Cable Audio Cable Ridge (NMX only) 5 LCD17PISAManual080604.p65 5 8/6/04, 5:14 PM
Inhaltszusammenfassung zur Seite Nr. 8
Display Setup –continued Figure 7 USB Cable D-Sub Cable (NX and NMX only) Flat Figure 8 Figure 9 Insert Top First Then Bottom Figure 10 OFF Position Vacation Switch ON Position Power Button 6 LCD17PISAManual080604.p65 6 8/6/04, 5:14 PM
Inhaltszusammenfassung zur Seite Nr. 9
Display Setup –continued Raise and Lower Monitor Screen The monitor may be raised or lowered. To raise or lower screen, place hands on each side of the monitor and lift or lower to the desired height (Figure RL.1). NOTE: Handle with care when raising or lowering the monitor screen. Figure RL.1 Tilt and Swivel Grasp both sides of the monitor screen with your hands and adjust the tilt and swivel as desired (Figure TS.1). NOTE: Handle with care when tilting and swiveling the monitor screen. Figur
Inhaltszusammenfassung zur Seite Nr. 10
Mounting Remove Monitor Stand for Mounting To prepare the monitor for alternate mounting purposes: 1. Place hands on each side of the monitor and lift up to the highest position. Remove the cable cover (Figure M.1). 2. Disconnect all cables. 3. Place monitor face down on a non-abrasive surface (Figure M.2). 4. Remove the 2 screws connecting the stand to the monitor (FigureM.2). 5. Lift up the stand to unlatch the upper hooks and remove the stand (FigureM.3). 6. Remove the 2 screws on the top of
Inhaltszusammenfassung zur Seite Nr. 11
Flexible Arm Installation This LCD monitor is designed for use with a flexible arm. To mount the monitor to a flexible arm: 1. Follow the instructions on how Remove Monitor Stand for Mounting to remove the stand. 2. Using the 4 screws from the stand removal and attach the arm to the monitor (Figure F.1). NOTE: The LCD monitor should only be used with an approved arm (e.g. GS mark). To meet the safety requirements, the monitor must be mounted to an arm which guaranties the necessary stability un
Inhaltszusammenfassung zur Seite Nr. 12
Controls ® OSM (On-Screen Manager) control buttons on the front of the monitor function as follows: To access OSM menu, press any of the control buttons (MENU/EXIT, Left, Right, Down, Up). To change signal input, press the SELECT button (NX and NXM only). NOTE: OSM must be closed in order to change signal input. Button Menu MENU/EXIT Exits the OSM controls. Exits to the OSM main menu. Left/Right Moves the highlighted area left/right to select control menus. Moves the bar left/right to increase o
Inhaltszusammenfassung zur Seite Nr. 13
Controls –continued NATIVE: Original color presented by the LCD panel that is unadjustable. sRGB: sRGB mode dramatically improves the color fidelity in the desktop environment by a single standard RGB color space. With this color supported environment, the operator could easily and confidently communicate color without further color management overhead in the most common situations. Tools OFF TIMER: Monitor will automatically power-down when the end user has selected a predetermined amount of ti
Inhaltszusammenfassung zur Seite Nr. 14
Recommended Use Safety Precautions and Maintenance FOR OPTIMUM PERFORMANCE, PLEASE NOTE THE FOLLOWING WHEN SETTING UP AND USING ® THE MULTISYNC LCD COLOR MONITOR: • DO NOT OPEN THE MONITOR. There are no user serviceable parts inside and opening or removing covers may expose you to dangerous shock hazards or other risks. Refer all servicing to qualified service personnel. • Do not spill any liquids into the cabinet or use your monitor near water. • Do not insert objects of any kind into the cabin
Inhaltszusammenfassung zur Seite Nr. 15
Recommended Use –continued CORRECT PLACEMENT AND ADJUSTMENT OF THE MONITOR CAN REDUCE EYE, SHOULDER AND NECK FATIGUE. CHECK THE FOLLOWING WHEN YOU POSITION THE MONITOR: • For optimum performance, allow 20 minutes for warm-up. • Adjust the monitor height so that the top of the screen is at or slightly below eye level. Your eyes should look slightly downward when viewing the middle of the screen. • Position your monitor no closer than 16 inches and no further away than 28 inches from your eyes. Th
Inhaltszusammenfassung zur Seite Nr. 16
Specifications ® ™ Monitor MultiSync LCD1770V Notes Specifications Monitor LCD Module Diagonal : 17.0 inch Active matrix; thin film transistor (TFT) Viewable Image Size : 17.0 inch liquid crystal display (LCD); 0.264 mm dot 2 Native Resolution (Pixel Count) : 1280 x 1024 pitch; 250cd/m white luminence; 450:1 contrast ratio, typical Input Signal Video : ANALOG 0.7 Vp-p/75 Ohms Sync : Separate sync. TTL Level Horizontal sync. Positive/Negative Vertical sync. Positive/Negative Display Colors 16,194
Inhaltszusammenfassung zur Seite Nr. 17
Specifications –continued ® Monitor MultiSync LCD1770NX Notes Specifications Monitor LCD Module Diagonal : 17.0 inch Active matrix; thin film transistor (TFT) Viewable Image Size : 17.0 inch liquid crystal display (LCD); 0.264 mm dot 2 Native Resolution (Pixel Count) : 1280 x 1024 pitch; 250cd/m white luminence; 500:1 contrast ratio, typical Input Signal Video : ANALOG 0.7 Vp-p/75 Ohms Digital Input: DVI Sync : Separate sync. TTL Level Horizontal sync. Positive/Negative Vertical sync. Positive/N
Inhaltszusammenfassung zur Seite Nr. 18
Specifications –continued ® Monitor MultiSync LCD1770NXM Notes Specifications Monitor LCD Module Diagonal : 17.0 inch Active matrix; thin film transistor (TFT) Viewable Image Size : 17.0 inch liquid crystal display (LCD); 0.264 mm dot 2 Native Resolution (Pixel Count) : 1280 x 1024 pitch; 250cd/m white luminence; 500:1 contrast ratio, typical Input Signal Video : ANALOG 0.7 Vp-p/75 Ohms Digital Input: DVI Sync : Separate sync. TTL Level Horizontal sync. Positive/Negative Vertical sync. Positive/
Inhaltszusammenfassung zur Seite Nr. 19
Features Thin-frame design creates more desktop space for you to work and play, while the flat screen’s crisp, bright images and crystal-clear text deliver a comfortable viewing experience. No Touch Auto Adjust™ automatically adjusts your optimal image settings upon initial power-on. ® AccuColor Control System allows you to change between five color settings on your display to match your personal preference. ® Redesigned OSM controls allow you to quickly and easily adjust all elements of your sc
Inhaltszusammenfassung zur Seite Nr. 20
Troubleshooting No picture • The signal cable should be completely connected to the display card/computer. • The display card should be completely seated in its slot. • Check the Vacation Switch should be in the ON position. • Front Power Switch and computer power switch should be in the ON position. • Check to make sure that a supported mode has been selected on the display card or system being used. (Please consult display card or system manual to change graphics mode.) • Check the monitor and
