Inhaltszusammenfassung zur Seite Nr. 1
MultiSync LCD1530V
User’s Manual
Inhaltszusammenfassung zur Seite Nr. 2
WARNING TO PREVENT FIRE OR SHOCK HAZARDS, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE. ALSO, DO NOT USE THIS UNIT’S POLARIZED PLUG WITH AN EXTENSION CORD RECEPTACLE OR OTHER OUTLETS UNLESS THE PRONGS CAN BE FULLY INSERTED. REFRAIN FROM OPENING THE CABINET AS THERE ARE HIGH VOLTAGE COMPONENTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. CAUTION RISK OF ELECTRIC SHOCK • DO NOT OPEN TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REF
Inhaltszusammenfassung zur Seite Nr. 3
Declaration Declaration of the Manufacturer We hereby certify that the colour monitor MultiSync LCD1530V (LA-15R01) are in compliance with Council Directive 73/23/EEC: - EN 60950 Council Directive 89/336/EEC: - EN 55022 - EN 61000-3-2 - EN 61000-3-3 - EN 55024 and marked with NEC-Mitsubishi Electric Visual Systems, Corp. 686-1, NISHIOI OI-MACHI ASHIGARAKAMI-GUN KANAGAWA 258-8533, JAPAN Power consumption of the monitor is less than 3 W when in power- saving mode. English-2
Inhaltszusammenfassung zur Seite Nr. 4
For the Customer to use in U.S.A. or Canada Canadian Department of Communications Compliance Statement DOC: This Class B digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations. Cet appareil numérique de la classe B respecte toutes les exigences du Règlement sur le matériel brouiller du Canada. C-UL: Bears the C-UL Mark and is in compliance with Canadian Safety Regulations according to C.S.A. C22.2 #950. Ce produit porte la marque ‘C-UL’ et se conforme
Inhaltszusammenfassung zur Seite Nr. 5
2. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy, and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interferenc
Inhaltszusammenfassung zur Seite Nr. 6
Contents Your new NEC-Mitsubishi MultiSync LCD monitor box* should contain the following: • MultiSync LCD1530V monitor with tilt base • Power Cord • Video Signal Cable • User’s Manual • CD-ROM includes complete User‘s Manual in PDF format and Windows related files (Inf file and color profile). To see the complete User‘s Manual, Acrobat Reader 4.0 must be installed on your PC. * Remember to save your original box and packing material to transport or ship the monitor. English-5 English
Inhaltszusammenfassung zur Seite Nr. 7
Quick Start To attach the MultiSync LCD monitor to your system, follow these instructions: 1. Turn off the power to your computer. 2. For the PC: Connect the 15-pin mini D-SUB of the appropriate signal cable to the connector of the display card in your system (Figure A.1). Tighten all screws. For the Mac: Connect the MultiSync LCD1530V Macintosh cable adapter to the computer (Figure B.1). Attach the 15-pin mini D-SUB end of the appropriate signal cable to the MultiSync LCD1530V Macintosh cable a
Inhaltszusammenfassung zur Seite Nr. 8
15-pin mini D-SUB 15-pin mini D-SUB Mac Adapter (not included) Figure A.1 Figure B.1 Signal Cable AC Power Cord Clip 1. Cables pass through in this hole. Figure C.1 2. Connect each connector Power Outlet Power Switch To Computer Figure D.1 English-7 English
Inhaltszusammenfassung zur Seite Nr. 9
Marking area B C A Push D I. Cable Cover Marking area How to remove this cover. A. Push marking area II. Connector Cover B. Slide to up side How to remove this cover. C. Remove D. Push under side E. Remove Figure E.1 English-8
Inhaltszusammenfassung zur Seite Nr. 10
Tilt Grasp both sides of the monitor screen with your hands and adjust the tilt as Figure TS.1 desired (Figure TS.1). Remove Monitor Stand for Mounting To prepare the monitor for alternate mounting purposes: 1. Remove the connector cover, hinge cover and Push Push cable cover. (Figure R.1) 2. Disconnect all cables. 3. Place monitor face down on a non- abrasive surface. (Place the screen on a Figure R.1 32 mm platform so that hole of stand match to screw location) (Figure R.2). 4. Remove the 4 sc
Inhaltszusammenfassung zur Seite Nr. 11
Controls OSM (On-Screen-Manager) Controls The OSM controls on the front of the monitor function as follows: To access OSM press any of the control buttons ( , , , ) or the PROCEED button Control Main Menu Sub-Menu EXIT Exits the OSM controls. Exits to the OSM controls main menu. Moves the highlighted area Moves the highlighted CONTROL / up/down to select one of the area up/down to select controls. one of the controls. Moves the bar left/right to CONTROL / Moves the highlighted increase or decrea
Inhaltszusammenfassung zur Seite Nr. 12
OSM LOCK OUT The OSM LOCK OUT control completely locks out access to all OSM control functions. When attempting to activate OSM controls while in the LOCK OUT mode, a screen will appear indicating that OSM controls are locked out. • To enter the LOCK OUT mode, simultaneously press the PROCEED and button. The LOCK OUT window will appear. • To activate the LOCK OUT function, simultaneously press and hold down the PROCEED and button. The OSM window will disappear within seconds and the LOCK OUT f
Inhaltszusammenfassung zur Seite Nr. 13
FINE Improves focus, clarity and image stability by increasing or decreasing this setting. Automatically adjusts the H. Size and Fine setting. Color Control System Five color presets select the desired color setting. Each color setting is adjusted at the factory. R,G,B: Increases or decreases Red, Green or Blue color depending upon which is selected. The change in color will appear on screen and the direction (increase or decrease) will be shown by the bars. Tools OSM H POS. OSM V POS. You can
Inhaltszusammenfassung zur Seite Nr. 14
Recommended Use Safety Precautions and Maintenance FOR OPTIMUM PERFORMANCE, PLEASE NOTE THE FOLLOWING WHEN SETTING UP AND USING THE MULTISYNC LCD COLOR MONITOR: • DO NOT OPEN THE MONITOR. There are no user serviceable parts inside and opening or removing covers may expose you to dangerous shock hazards or other risks. Refer all servicing to qualified service personnel. • Do not spill any liquids into the cabinet or use your monitor near water. • Do not insert objects of any kind into the cabinet
Inhaltszusammenfassung zur Seite Nr. 15
• If the monitor does not operate normally by following operating instructions. • Do not bend power cord. • Do not use monitor in high temperatured, humid, dusty, or oily areas. • Do not cover vent on monitor. • If monitor is broken, do not come in contact with the liquid crystal. • If glass is broken. Handle with care. • Allow adequate ventilation around the monitor so that heat can properly dissipate. Do not block ventilated openings or place the monitor near a radiator or other heat sources.
Inhaltszusammenfassung zur Seite Nr. 16
• Clean the LCD monitor surface with a lint-free, non-abrasive cloth. Avoid using any cleaning solution or glass cleaner! • Adjust the monitor’s brightness and contrast controls to enhance readability. • Use a document holder placed close to the screen. • Position whatever you are looking at most of the time (the screen or reference material) directly in front of you to minimize turning your head while you are typing. • Avoid displaying fixed patterns on the monitor for long periods of time to a
Inhaltszusammenfassung zur Seite Nr. 17
Specifications Monitor Specifications MultiSync LCD1530V Notes LCD Module Diagonal: 15.1 inch Active matrix; thin film transistor (TFT) liquid Viewable Image Size: 15.1 inch crystal display (LCD); Native Resolution (Pixel Count): 1024 x 768 2 0.30 mm dot pitch; 200cd/m white luminence; 200:1 contrast ratio, typical Input Signal Video: ANALOG 0.7 Vp-p/75 Ohms Sync: Separate sync.TTL Level Horizontal sync. Positive/Negative Vertical sync. Positive/Negative 16,194,277 colors with Depends on display
Inhaltszusammenfassung zur Seite Nr. 18
Features Wider Compatibility: Because the MultiSync LCD monitor is analog through and through, it does not require special analog to digital display or interface cards but can accept RGB input directly. Reduced Footprint: Provides the ideal solution for environments requiring superior image quality but with size and weight limitations. The monitor’s small footprint and low weight allow it to be moved or transported easily from one location to another. Color Control System: Allows you to adjust t
Inhaltszusammenfassung zur Seite Nr. 19
Troubleshooting No picture • The signal cable should be completely connected to the display card/ computer. • The display card should be completely seated in its slot. • Power Switch and computer power switch should be in the ON position. • Check to make sure that a supported mode has been selected on the display card or system being used. (Please consult display card or system manual to change graphics mode.) • Check the monitor and your display card with respect to compatibility and recommende
Inhaltszusammenfassung zur Seite Nr. 20
LED on monitor is not lit (no green or amber color can be seen) • Power Switch should be in the ON position and power cord should be connected. • Make certain the computer is not in a power-saving mode (touch the keyboard or mouse). Display image is not sized properly • Use the OSM Image Adjust controls to increase or decrease the Coarse total. • Check to make sure that a supported mode has been selected on the display card or system being used. (Please consult display card or system manual to c
