Inhaltszusammenfassung zur Seite Nr. 1
English
Page 11 99/06/09, 14:33
Inhaltszusammenfassung zur Seite Nr. 2
Page 12 99/06/09, 14:33
Inhaltszusammenfassung zur Seite Nr. 3
Introduction to the NEC MultiSync LCD1525V E - 1 Introduction to the NEC MultiSync LCD1525V Congratulations on your purchase of the NEC MultiSync LCD1525V true colour monitor! Wider Compatibility Because the MultiSync LCD monitor is analog through and through, it does not require special analog to digital display or interface cards but can accept RGB input directly. Reduced Footprint Provides the ideal solution for environments requiring superior image quality but with size and weight limitation
Inhaltszusammenfassung zur Seite Nr. 4
E - 2 Introduction to the NEC MultiSync LCD1525V IPM (Intelligent Power Manager) System Provides innovative power-saving methods that allow the monitor to shift to a lower power consumption level when on but not in use, saving two- thirds of your monitor energy costs, reducing emissions and lowering the air conditioning costs of the workplace. Multiple Frequency Technology Automatically adjusts monitor to the display card’s scanning frequency, thus displaying the resolution required. FullScan Ca
Inhaltszusammenfassung zur Seite Nr. 5
MultiSync LCD1525V Contents E - 3 Contents Your new NEC MultiSync LCD monitor box should contain the following: MultiSync LCD1525V monitor with video signal cable and AC Adapter Power Cord – NEC MultiSync LCD1525V. – AC Power Cord. – AC Adapter. – Video Signal Cable. – User’s Manual. Remember to save your original box and packing material to transport or ship the monitor. Page 15 99/06/09, 14:33
Inhaltszusammenfassung zur Seite Nr. 6
E - 4 Recommended Use Recommended Use Safety Precautions and Maintenance For optimum performance, please note the following when setting up and using the MultiSync LCD colour monitor: • DO NOT OPEN THE MONITOR. There are no user serviceable parts inside and opening or removing covers may expose you to dangerous shock hazards or other risks. Refer all servicing to qualified service personnel. • Allow adequate ventilation around the monitor so that heat can properly dissipate. Do not block ventila
Inhaltszusammenfassung zur Seite Nr. 7
Recommended Use E - 5 • AC Adapter shall not be used outdoors. • Handle with care when transporting. Save packaging for trans- porting. • The inside of the fluorescent tube located within the LCD moni- tor contains mercury. Please follow the bylaws or rules of your local municipality to dispose of this tube properly. Immediately unplug your monitor from the wall outlet and refer servic- ing to qualified service personnel under the following conditions: • When the power supply cord or plug is dam
Inhaltszusammenfassung zur Seite Nr. 8
E - 6 Recommended Use CORRECT PLACEMENT AND ADJUSTMENT OF THE MONITOR CAN REDUCE EYE, SHOULDER AND NECK FATIGUE. CHECK THE FOLLOWING WHEN YOU POSITION THE MONITOR: • For optimum performance, allow 20 minutes for warm-up. • Adjust the monitor height so that the top of the screen is at or slightly below eye level. Your eyes should look slightly down- ward when viewing the middle of the screen. • Position your monitor no closer than 40 cm and no further away than 70 cm from your eyes. The optimal d
Inhaltszusammenfassung zur Seite Nr. 9
Installation E - 7 Installation To attach the MultiSync LCD1525V monitor to your system, follow these instructions: 1. Turn off the power to your computer. 2. For the PC: Connect the 15-pin mini D-SUB of the appropriate signal cable to the connector of the display card in your system (Figure A.1). Tighten all screws. For the Mac: Connect the MultiSync LCD1525V Macintosh cable adapter to the computer (Figure B.1). Attach the 15-pin mini D-SUB end of the appropriate signal cable to the MultiSync L
Inhaltszusammenfassung zur Seite Nr. 10
E - 8 Installation 15-pin mini D-SUB 15-pin mini D-SUB Mac Adapter (not included) Figure A.1 Figure B.1 Page 20 99/06/09, 14:33
Inhaltszusammenfassung zur Seite Nr. 11
MultiSyn Installation E - 9 Figure C.1 Clip A Clip B Figure D.1 Power Button Figure E.1 Page 21 99/06/09, 14:33
Inhaltszusammenfassung zur Seite Nr. 12
E - 10 Installation Page 22 99/06/09, 14:33
Inhaltszusammenfassung zur Seite Nr. 13
Controls E - 11 Controls OSM Controls The OSM controls on the front of the monitor provide the following functions: To access OSM press any of the control buttons ( , , , ) or the PROCEED button. Main Menu Sub-Menu EXIT Exits the OSM controls. Exits to the OSM main menu. CONTROL / Moves the highlighted Moves the highlighted area up/down to select area up/down to select one of the controls one of the controls CONTROL / Moves the highlighted Moves the bar left/ right area left/right to selec
Inhaltszusammenfassung zur Seite Nr. 14
E - 12 Controls Brightness and Contrast Brightness Adjusts the overall image and background screen brightness. Contrast Adjusts the image brightness in relation to the background. Auto Adjust Corrects the image displayed for non-standard video inputs. Auto Adjust Automatically adjusts the Position, H. size and Fine controls. Position Controls horizontal and vertical image position within the display area of the LCD. LEFT/RIGHT Controls Horizontal Image Position within the display area of the
Inhaltszusammenfassung zur Seite Nr. 15
Controls E - 13 Auto Adjust Automatically adjusts the H. Size or Fine settings. Colour Control System Five options select the desired colour setting. If a setting is adjusted, the name of the setting will change to Custom. Colour Gain (Red, Green, Blue): Increases or decreases Red, Green or Blue colour depending upon which is selected. The change in colour will appear on screen and the direction (increase or decrease) will be shown by the colour bars. Tools Language: OSM control menus are availa
Inhaltszusammenfassung zur Seite Nr. 16
E - 14 Controls Factory Preset Selecting Factory Preset allows you to reset all OSM control settings back to the factory settings. The RESET button will need to be held down for several seconds to take effect. Individual settings can be reset by highlighting the control to be reset and pressing the RESET button. Resolution Notifier This optimal resolution is 1024 x 768. If ON is selected, a message will appear on the screen after 2 minutes, notifying you that the resolution is not at 1024 x 768.
Inhaltszusammenfassung zur Seite Nr. 17
Specifications E - 15 Specifications Display 38 cm (15.1 inch) viewable image size; 1024 x 768 native resolution (Pixel Count); active matrix; thin film transistor (TFT); liquid crystal display (LCD); 2 0.30 mm dot pitch; 200 cd/m white luminance, typical; 200:1 contrast ratio, typical Input Signal Video Analog 0.7 Vp-p 75 W Sync Separate sync. TTL Level Horizontal sync. Positive/Negative Vertical sync. Positive/Negative Display Colours Analog Input: 16,194,277 colours with dithering (Depends on
Inhaltszusammenfassung zur Seite Nr. 18
E - 16 Specifications Power Supply AC 100-240 V @ 50/60 Hz Current Rating 0.4 A @ 100-120 V / 0.25 A @ 220-240 V Dimensions 370(W) x 325(H) x 151(D) mm Weight 4.0 kg Operating Temperature 5° C to +35° C Environmental Humidity 30% to 80% Considerations Storage Temperature -10° C to +60° C Environmental Humidity 10% to 85% Considerations * Interpolated Resolutions: When resolutions are shown that are lower than the pixel count of the LCD module, text may appear different. This is normal and neces
Inhaltszusammenfassung zur Seite Nr. 19
Troubleshooting/Support E - 17 Troubleshooting/Support Problem Check These Items No picture - The signal cable should be completely connected to the display card/computer. - The display card should be completely seated in its slot. - Power button and computer power switch should be in the ON position. - Check to make sure that a supported mode has been selected on the display card or system being used. (Please consult display card or system manual to change graphics mode.) - Check the monitor an
Inhaltszusammenfassung zur Seite Nr. 20
E - 18 Troubleshooting/Support Problem Check These Items Image is unstable, - Signal cable should be completely attached to the unfocused or computer. swimming is - Use the OSM Image Adjust controls to focus and adjust apparent display by increasing or decreasing the Fine Control. When the display mode is changed, the OSM Image Adjust settings may need to be re-adjusted. - Check the monitor and your display card with respect to compatibility and recommended signal timings. - If your text is garb
