Inhaltszusammenfassung zur Seite Nr. 1
MultiSync LCD1525X
User’s Manual
Inhaltszusammenfassung zur Seite Nr. 2
Safety Instruction WARNING TO PREVENT FIRE OR SHOCK HAZARDS, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE. ALSO, DO NOT USE THIS UNIT’S POLARIZED PLUG WITH AN EXTENSION CORD RECEPTACLE OR OTHER OUTLETS UNLESS THE PRONGS CAN BE FULLY INSERTED. REFRAIN FROM OPENING THE CABINET AS THERE ARE HIGH VOLTAGE COMPONENTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. CAUTION RISK OF ELECTRIC SHOCK • DO NOT OPEN TO REDUCE THE RISK OF ELECTRIC SHOCK, MAKE SURE POWER CORD IS UNPLUGGED FROM WALL SOCKE
Inhaltszusammenfassung zur Seite Nr. 3
Declaration of the Manufacturer We hereby certify that the colour monitor MultiSync LCD1525X (LA-1526HMW) MultiSync LCD1525X (LA-1526HMW-BK) are in compliance with Council Directive 73/23/EEC: - EN 60950 Council Directive 89/336/EEC: - EN 55022 - EN 61000-3-2 - EN 61000-3-3 - EN 55024 and marked with NEC-Mitsubishi Electric Visual Systems, Corp. 686-1, NISHIOI OI-MACHI ASHIGARAKAMI-GUN KANAGAWA 258-8533, JAPAN Declaration of Conformity This device complies with Part 15 of FCC Rules. Operation is
Inhaltszusammenfassung zur Seite Nr. 4
For the Customer to use in U.S.A. or Canada Canadian Department of Communications Compliance Statement DOC: This Class B digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations. Cet appareil numérique de la classe B respecte toutes les exigences du Règlement sur le matériel brouiller du Canada. C-UL: Bears the C-UL Mark and is in compliance with Canadian Safety Regulations according to C.S.A. C22.2 #950. Ce produit porte la marque ‘C-UL’ et se conforme
Inhaltszusammenfassung zur Seite Nr. 5
2. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy, and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interferenc
Inhaltszusammenfassung zur Seite Nr. 6
Why do we have environmentally labelled computers? In many countries, environmental labelling has become an established method for encouraging the adaptation of goods and services to the environment. The main problem, as far as computers and other electronics equipment are concerned, is that environmentally harmful substances are used both in the products and during the manufacturing. Since it is as yet not possible to satisfactorily recycle the majority of electronics equipment, most of these p
Inhaltszusammenfassung zur Seite Nr. 7
Labelled products must meet strict environmental demands, for example, in respect of the reduction of electric and magnetic fields, physical and visual ergonomics and good usability. On the back page of this folder, you will find a brief summary of the environmental requirements met by this product. The complete environmental criteria document may be ordered from: TCO Development Unit S-114 94 Stockholm Sweden Fax: +46 8 782 92 07 Email: development@tco.se Current information regarding TCO’95 ap
Inhaltszusammenfassung zur Seite Nr. 8
TCO’95 requirement permits the inclusion of lead since no replacement has yet been developed. Cadmium** Cadmium is present in rechargeable batteries and in the colourgenerating layers of certain computer displays. Cadmium damages the nervous system and is toxic in high doses. TCO’95 requirement states that batteries may not contain more than 25 ppm (parts per million) of cadmium. The colourgenerating layers of display screens must not contain any cadmium. Mercury** Mercury is sometimes found in
Inhaltszusammenfassung zur Seite Nr. 9
LA-1526HMW TCO’99 Congratulations! You have just purchased a TCO’99 approved and labeled product! Your choice has provided you with a product developed for professional use. Your purchase has also contributed to reducing the burden on the environment and also to the further development of environmentally adapted electronics products. Why do we have environmentally labelled computers? In many countries, environmental labelling has become an established method for encouraging the adaptation of goo
Inhaltszusammenfassung zur Seite Nr. 10
The environmental demands impose restrictions on the presence and use of heavy metals, brominated and chlorinated flame retardants, CFCs (freons) and chlorinated solvents, among other things. The product must be prepared for recycling and the manufacturer is obliged to have an environmental policy which must be adhered to in each country where the company implements its operational policy. The energy requirements include a demand that the computer and/or display, after a certain period of inacti
Inhaltszusammenfassung zur Seite Nr. 11
The relevant TCO’99 demand requires that plastic components weighing more than 25 grams must not contain flame retardants with organically bound bromine or chlorine. Flame retardants are allowed in the printed circuit boards since no substitutes are available. Cadmium** Cadmium is present in rechargeable batteries and in the colour- generating layers of certain computer displays. Cadmium damages the nervous system and is toxic in high doses. The relevant TCO’99 require- ment states that batterie
Inhaltszusammenfassung zur Seite Nr. 12
Introduction to the NEC MultiSync LCD1525X Congratulations on your purchase of the NEC MultiSync LCD1525X true colour monitor! ambix Technology: Dual input technology allowing both analog and digital inputs through one connector (DVI-I) as well as additional legacy analog support through a traditional 15-pin VGA connector. Provides traditional MultiSync technology compatibility for analog as well as TMDS (Transition Minimized Differential Signal) based digital compatibility for digital inputs. T
Inhaltszusammenfassung zur Seite Nr. 13
Dual Inputs: The MultiSync LCD1525X offers dual inputs, allowing you to connect the monitor to two systems. You can easily switch between computers with a touch of a button on the MultiSync LCD1525X front control panel. USB Hub: The MultiSync LCD1525X has a USB Hub, two upstream ports and four downstream ports. You can use two sets of computers by one LCD1525X. Reduced Footprint: Provides the ideal solution for environments requiring superior image quality but with size and weight limitations. T
Inhaltszusammenfassung zur Seite Nr. 14
DVI/D-SUB Contents Your new NEC MultiSync LCD monitor box should contain the following: NEC MultiSync LCD1525X monitor with DVI-A to VGA Cable. – NEC MultiSync LCD1525X. – AC Power Cable. – DVI-A to VGA Cable. – DVI-D to DVI-D Video Signal Cable. – USB Cable. – CD-ROM includes complete User‘s Manual in PDF format (1525X.pdf) and Windows related files (Inf file and color profile). To see the complete User‘s Manual, Acrobat Reader 4.0 must be installed on your PC. – User’s Manual. Remember to save
Inhaltszusammenfassung zur Seite Nr. 15
Recommended Use Safety Precautions and Maintenance For optimum performance, please note the following when setting up and using the MultiSync LCD colour monitor: • DO NOT OPEN THE MONITOR. There are no user serviceable parts inside and opening or removing covers may expose you to dangerous shock hazards or other risks. Refer all servicing to qualified service personnel. • Allow adequate ventilation around the monitor so that heat can properly dissipate. Do not block ventilated openings or place
Inhaltszusammenfassung zur Seite Nr. 16
• If monitor is broken, do not come in contact with the liquid crystal. • If glass is broken. Handle with care. Immediately unplug your monitor from the wall outlet and refer servicing to qualified service personnel under the following conditions: • When the power supply cord or plug is damaged. • If liquid has been spilled or objects have fallen into the monitor. • If the monitor has been exposed to rain or water. • If the monitor has been dropped or the cabinet is damaged. CORRECT PLACEMENT AN
Inhaltszusammenfassung zur Seite Nr. 17
Installation To attach the MultiSync LCD1525X monitor to your system, follow these instructions: 1. Turn off the power of your computer. 2. For the PC with DVI digital output: Connect the DVI-D to DVI-D signal cable to the connector of the display card in your system (Figure A.1). Tighten all screws. For the PC with analog output: Connect the DVI-A to VGA cable to the connector of the display card in your system (Figure A.2). To connect a secondary PC with analog output, connect the MultiSync LC
Inhaltszusammenfassung zur Seite Nr. 18
7. To complete the setup of your MultiSync LCD monitor, use the following OSM controls: • Auto Adjust Contrast • Auto Adjust Refer to the Controls section of this User’s Manual for a full description of these OSM controls. NOTE: If you have any problems, please refer to the Troubleshooting section of this User’s Manual. English-17 English
Inhaltszusammenfassung zur Seite Nr. 19
A.1 A.2 B.1 B.2 English-18
Inhaltszusammenfassung zur Seite Nr. 20
DVI D-SUB A B C.1 English-19 English
