Inhaltszusammenfassung zur Seite Nr. 1
MENU SELECT
TM
AccuSync 750F
AS750FCovercontents 1 10/16/03, 9:38 AM
Inhaltszusammenfassung zur Seite Nr. 2
Index Warning .................................................................................................................... 1 Contents ................................................................................................................. 2 Quick Start ............................................................................................................. 3 Controls .............................................................................................................
Inhaltszusammenfassung zur Seite Nr. 3
WARNING TO PREVENT FIRE OR SHOCK HAZARDS, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE. ALSO, DO NOT USE THIS UNIT'S POLARIZED PLUG WITH AN EXTENSION CORD RECEPTACLE OR OTHER OUTLETS UNLESS THE PRONGS CAN BE FULLY INSERTED. REFRAIN FROM OPENING THE CABINET AS THERE ARE HIGH VOLTAGE COMPONENTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. CAUTION RISK OF ELECTRIC SHOCK • DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS IN
Inhaltszusammenfassung zur Seite Nr. 4
Contents ™ Your new NEC AccuSync monitor box* should contain the following: • AccuSync Monitor with tilt/swivel base • Power Cord • Captive Signal Cable • User’s Manual MENU SELECT Captive Signal Cable MENU SELECT TM AccuSync 750F Power Cord User’s Manual * Remember to save your original box and packing material to transport or ship the monitor. 2 AS750Fmanualfinal.p65 2 11/11/03, 2:16 PM
Inhaltszusammenfassung zur Seite Nr. 5
Quick Start Connecting the Tilt/Swivel stand 1. With the monitor unplugged from your system and the wall outlet, carefully turn the monitor down on a firm table 2. Align the hooks on the tilt/swivel stand with the matching slots in the base of the monitor. 3. Insert the hooks into slots. 4. Slide the tilt/swivel stand toward the front of the monitor until the latches click into the locked position. NOTE: For correct use of monitor, completely attach tilt/swivel base to the monitor. NOTE: To avoi
Inhaltszusammenfassung zur Seite Nr. 6
Quick Start –continued ™ To attach the AccuSync monitor to your system, follow these instructions: 1. Turn off the power to your computer. 2. If necessary, install the display card into your system. For more information, refer to the display card manual. 3. For the PC: Plug the end of the video signal cable of the monitor in the video signal connector of the computer. (Figure A.1). Tighten all screws. For the Mac: Connect the Macintosh cable adapter (not included) to the monitor connector on the
Inhaltszusammenfassung zur Seite Nr. 7
Quick Start –continued Figure B.1 Mac Adapter (Not Included) 15-pin mini D-SUB Captive Signal Cable Figure C.1 Power Outlet Power Cord 5 AS750Fmanualfinal.p65 5 11/11/03, 2:16 PM
Inhaltszusammenfassung zur Seite Nr. 8
Controls OSD (On Screen Display) control buttons on the front of the monitor function as follows: Control Function Use this button to turn the monitor on or off. Power Button This Indicator lights up green when the monitor Power (DPMS) operates normally. If the monitor is in DPMS Indicator (Energy Saving) mode, this indicator color changes to amber. MENU (or OSD) Use this button to enter or exit the on screen Button display. Use these buttons to choose or adjust items in Buttons the on screen d
Inhaltszusammenfassung zur Seite Nr. 9
Controls –continued Screen Adjustment Making adjustments to the image size, position and operating parameters of the monitor is quick and easy with the On Screen Display Control system. A short example is quick and easy given below to familiarize you with the use of the controls. The following section is an outline of the available adjustments and selections you can make using the OSD. NOTE: Allow the monitor to stabilize for at least 30 minutes before making image adjustments. To make adjustmen
Inhaltszusammenfassung zur Seite Nr. 10
Controls –continued Contrast To adjust the contrast of the screen. Brightness To adjust the brightness of the screen. Horizontal Position To move image left and right. Horizontal Size To adjust image width. Vertical Position To move image up and down. Vertical Size To adjust image height. Tilt To correct image rotation. Pincushion To correct a concave or convex bowing of the image. Pincushion Balance OSD Adjust Description To correct the balance of both sides bowing. Parallelogram To correctly a
Inhaltszusammenfassung zur Seite Nr. 11
Controls –continued COLOR • 6500: Slightly reddish white. • 9300: Slightly bluish white. • K: Select the screen temperature which you prefer among reddish or bluish or any color in between. • RGB: Set your own color levels. RECALL You can use this function to reload the modified parameters for screen display operation, as specified by the user after purchase: Position, Size, Side Pincush- ion, Side Pincushion Balance, Parallelogram, Trapezoid (These recalled options may differ depending on the m
Inhaltszusammenfassung zur Seite Nr. 12
Recommended Use Safety Precautions and Maintenance FOR OPTIMUM PERFORMANCE, PLEASE NOTE THE FOLLOWING WHEN SETTING UP AND USING ™ THE ACCUSYNC COLOR MONITOR: • DO NOT OPEN THE MONITOR. There are no user serviceable parts inside and opening or removing covers may expose you to dangerous shock hazards or other risks. Refer all servicing to qualified service personnel. • Do not spill any liquids into the cabinet or use your monitor near water. • Do not insert objects of any kind into the cabinet sl
Inhaltszusammenfassung zur Seite Nr. 13
Recommended Use –continued CORRECT PLACEMENT AND ADJUSTMENT OF THE MONITOR CAN REDUCE EYE, SHOULDER AND NECK FATIGUE. CHECK THE FOLLOWING WHEN YOU POSITION THE MONITOR: • Adjust the monitor height so that the top of the screen is at or slightly below eye level. Your eyes should look slightly downward when viewing the middle of the screen. • Position your monitor no closer than 12 inches and no further away than 28 inches from your eyes. The optimal distance is 18 inches. • Rest your eyes periodi
Inhaltszusammenfassung zur Seite Nr. 14
Specifications Picture Tube 17 inches (16.0 inches viewable) 90 degree deflection 0.25mm dot pitch AGARAS (Anti-Glare Anti-Reflective Anti-Static) coating Sync Input Horizontal Freq. 30 - 71kHz (Automatic) Vertical Freq. 55 - 120Hz (Automatic) Input Form Separate TTL, Positive/Negative Signal Input 15 pin D-Sub Connector Video Input Input Form Separate, RGB Analog, 0.7Vp-p/75 ohm, Positive Plug & Play DDC 2B 73W Normal Power Stand-by/Suspend ≤ 15W Consumption DPM Off ≤ 5W 640 x 480 @ 60H
Inhaltszusammenfassung zur Seite Nr. 15
Features ClearFlat™ Shadow Mask CRT: Delivers an outstanding viewing experience with a virtually flat image, eliminating distortion and reducing glare so that what you see on-screen is as realistic and lifelike as what you see on your printed output. The patented ClearFlat CRT also offers a high contrast screen with a fine grille pitch, delivering crisp, clean text and graphics. ® OptiClear Screen Surface: Reduces reflection and glare and increases contrast without sacrificing focus level, clari
Inhaltszusammenfassung zur Seite Nr. 16
Troubleshooting No picture • Display card should be completely seated in its slot. • Power Button and computer power switch should be in the ON position. • Signal cable should be completely connected to display card/computer and monitor. • Check connector for bent or pushed-in pins. Image is scrolling or unstable • Signal cable should be completely attached to the computer and monitor. • Check pin assignments and signal timings of the monitor and your display card with respect to recommended tim
Inhaltszusammenfassung zur Seite Nr. 17
References NEC-Mitsubishi Monitor Customer Service & Support Customer Service and Technical Support: (800) 632-4662 Fax: (800) 695-3044 Parts and Accessories/Macintosh Cable Adapter: (888) NEC-MITS [888-632-6487] Customer Service Policies & Processes: http://www.necmitsubishi.com/ css/ServicePolicies/ServicePolicies.htm Online Technical Support Knowledge Base: http://www.necmitsubishi.com/ css/knowledgebase.cfm Customer Service & Technical Support Email: http://www.necmitsubishi.com/ css/tech
Inhaltszusammenfassung zur Seite Nr. 18
Limited Warranty NEC-Mitsubishi Electronics Display of America, Inc. (hereinafter “NMD-A”) warrants this Product to be free from defects in material and workmanship and, subject to the conditions set forth below, agrees to repair or replace (at NMD-A’s sole option) any part of the enclosed unit which proves defective for a period of three (3) years from the date of first consumer purchase. Spare parts are warranted for ninety (90) days. Replacement parts or unit may be new or refurbished and wil
Inhaltszusammenfassung zur Seite Nr. 19
Declaration of the Manufacturer We hereby certify that the color monitor AccuSync 750F (AS750F) is in compliance with Council Directive 73/23/EEC: – EN 60950 Council Directive 89/336/EEC: – EN 55022 – EN 61000-3-2 – EN 61000-3-3 – EN 55024 and marked with NEC-Mitsubishi Electric Visual Systems Corporation 4-13-23, Shibaura, Minato-Ku Tokyo 108-0023, Japan 17 AS750Fmanualfinal.p65 17 11/11/03, 2:16 PM
Inhaltszusammenfassung zur Seite Nr. 20
AVERTISSEMENT AFIN D’ÉVITER TOUT RISQUE D’INCENDIE OU D’ÉLECTROCUTION, NE PAS EXPOSER CET APPAREIL À LA PLUIE OU À L’HUMIDITÉ. NE PAS UTILISER LA FICHE D’ALIMENTATION POLARISÉE AVEC UNE PRISE DE CORDON DE RALLONGE OU AUTRE QUE SI LES BROCHES PEUVENT ÊTRE ENTIÈREMENT INTRODUITES. NE PAS OUVRIR LE BOÎTIER, LEQUEL CONTIENT DES COMPOSANTS À HAUTE TENSION. CONFIER TOUS TRAVAUX À DU PERSONNEL TECHNIQUE QUALIFIÉ. ATTENTION RISQUE DE DÉCHARGE ÉLECTRIQUE • NE PAS OUVRIR ATTENTION : POUR ÉVITER TOUT RISQU
