Inhaltszusammenfassung zur Seite Nr. 1
XT4871
14 INCH
COLOR MONITOR
USER'S
MANUAL
Features:
• 1024 x 768, Non-Interlaced
• 1280 x 1024, Interlaced
• .28 mm Dot Pitch
• 100 Hz Refresh Rate
• Power Saving Operation (VESA DPMS)
• Non-Glare Screen
• Full Screen Display
• Easy Access Front Controls
• Unlimited Palette of Colors
• Digital Controls
• Plug and Play
Part #MAN104 Rev 1.0 XT4871
Inhaltszusammenfassung zur Seite Nr. 2
Table of Contents Section 1 - General Information ............................................................ 2 Section 2 - Installation ........................................................................... 3 Section 3 - Monitor Controls and LEDs................................................. 4 Section 4 - Troubleshooting................................................................... 5 Appendix A - Specifications ................................................................... 5
Inhaltszusammenfassung zur Seite Nr. 3
Section 1 - General Information Congratulations on purchasing a MaxTech 14-inch Color Monitor. The monitor uses one of the finest CRTs available in the industry. The 0.28 mm dot pitch non-glare tube, provides a crisp and vivid color display. The monitor complies with the MRP-I standard to reduce electro-magnetic emissions. Advanced electronics and digital controls make it the perfect monitor for applications ranging from home computing to business presentations. The monitor is compatible with VG
Inhaltszusammenfassung zur Seite Nr. 4
Horizontal and Vertical Synchronization signals. This mode reduces the monitor’s power consumption to 5W. When the synchronization signals are re-enabled the monitor returns to normal operation. Section 2 - Installation 2.1 Attaching the Base Figure 2-1 Connecting the Base • Carefully place the monitor on its side or top. • Insert the hooks on the swivel base into the slots in the bottom of the monitor. Push down and forward on the base until it snaps into place. • Place the display upright in a
Inhaltszusammenfassung zur Seite Nr. 5
• The monitor is now ready for use. Section 3 - Monitor Controls and LEDs Figure 3-1 Controls and LEDs 13 12 11 1 2 3 4 10 8 6 9 7 5 1. POWER LED: Lit when monitor is ON. Unlit when monitor is OFF. 2. POWER: Press once to turn monitor ON. Press again to turn monitor OFF. 3.CONTRAST: Adjusts the contrast. Turn clockwise to increase the contrast. 4.BRIGHTNESS: Adjusts the display brightness. Turn clockwise to increase the brightness. Digital Controls: When the LED above a control icon (5-10) is se
Inhaltszusammenfassung zur Seite Nr. 6
6. PINCUSHION: Adjusts the pincushion (shape) of the display 7. HORIZONTAL-SIZE: Adjusts the display width. 8. VERTICAL-POSITION: Adjusts the vertical position 9. VERTICAL-SIZE: Adjusts the display height 10. HORIZONTAL-POSITION: Adjusts the horizontal position 11. SELECT: Press to select an adjustment parameter (5-10). 12. DOWN: Press to reduce the setting of the selected parameter (5-10). 13. UP: Press to increase the setting of the selcted parameter (5-10). Note: Press both buttons (UP and DO
Inhaltszusammenfassung zur Seite Nr. 7
1024 x 768 70 Hz 1152 x 864 60 Hz 1280 x 1024 43 Hz Deflection Geometric distortion H.<=2.5mm, V.<=2.5mm Linearity distortion H<=10%, V<=8% Pincushion distortion <=2mm High voltage regulation H<=4mm, V<=4mm(0-25FL) Low radiation* MPR-I specification Front controls Power, Brightness, Contrast, Horizontal-Size, Hori- zontal-Position, Vertical-Size, Vertical-Position, Pincushion, Trapezoid Power saving Display Power Management Signaling (DPMS) SUSPEND mode 25W (Max.) OFF mode 5W (Max.) Input voltag
Inhaltszusammenfassung zur Seite Nr. 8
Appendix C - Three Year Warranty MaxTech warrants to the original buyer of this product against defects in material and workmanship for three years from the date of purchase. Except as specified below, this warranty covers all defects in material or workmanship in this product. The following are not covered by the warranty: 1. Any product which is not distributed in North America by MaxTech or which is not purchased in North America from an authorized MaxTech Dealer. 2. Any product on which the
Inhaltszusammenfassung zur Seite Nr. 9
address provided by the technician when you call. We recommend that the unit be insured. This warranty is valid for products sold in North America only. Contact your local authorized distributor or dealer for the warranty offered in other areas. All warranty services must be performed by Authorized Service Centers. There are no user serviceable parts inside the unit. Do not remove any components or attempt to service the unit by any unauthorized service center. This warranty is voided if the pro
Inhaltszusammenfassung zur Seite Nr. 10
• Reorient or relocate the receiving antenna • Increase the separation between the equipment and the receiver • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected • Consult the dealer or an experienced radio / TV technician for help Notice: Shielded cables, if any, must be used in order to comply with the emission limits. Notice: Any change or modification not expressly approved by the Grantee of the equipment authorization could void the use
