Inhaltszusammenfassung zur Seite Nr. 1
ENGLISH
OWNER’S MANUAL
MONITOR SIGNAGE
Please read this manual carefully before operating
your set and retain it for future reference.
MONITOR SIGNAGE MODELS
M4214C
www.lg.com
Inhaltszusammenfassung zur Seite Nr. 2
Table of Contents Accessories 3 Connecting the Stand 4 Connecting the Speakers 5 Portrait Mode 6 Using the Remote Control 7 Part Names and Functions 9 Connecting to External Devices 10 Connecting to Your PC .......................................................................................................10 Using the LAN ......................................................................................................................12 Daisy Chaining Set .................................
Inhaltszusammenfassung zur Seite Nr. 3
Accessories Included Accessories Thank you for your purchase. Check to make sure that the accessories shown immediately below have been included with your set. ❖ Note that the accessories may look different from those shown here. Remote Control D-Sub Signal Power Cable Audio Cable (PC) CD-ROM / Cards / Batteries Cable Separately Purchased Accessories Optional accessories are subject to change without prior notice to improve the performance of the set. New optional accessories may be added per
Inhaltszusammenfassung zur Seite Nr. 4
Connecting the Stand - Only on some models. Take the parts for the stand out of the box and assemble them as 1. shown in the picture. First, check if the following parts are all present. Parts Screws (6) Stand (1) Cable management (1) Place a soft cloth on a table and place the set screen side down upon the table. 2. Connect the stand as shown below. Use the screws to secure the stand on the rear side of the set as shown 3. below. 4
Inhaltszusammenfassung zur Seite Nr. 5
Connecting the Speakers - Only on some models. Attach the speakers to the set using screws as shown below. Then, connect the speaker cable. After installing your speakers, use holders and cable ties to organize the speaker cables. Cable holder Remove the paper. * This feature is not available on all models. When the speakers are installed. Cable ties *Connect the input terminal with the proper color match. * This feature is not available on all models. 5
Inhaltszusammenfassung zur Seite Nr. 6
Portrait Mode - Only on some models. "When installing in portrait mode, rotate the set clockwise." 6
Inhaltszusammenfassung zur Seite Nr. 7
Using the Remote Control Remote Control Buttons POWER On / Off Button 1 - Switches the set on from standby or off to standby. 1 MONITOR ENERGY INPUT MONITOR On / Off Button 2 2 ON OFF - Turns off the monitor and then turn it back on. SAVING Number and Letter Buttons 3 . , ! ABC DFG - Type numbers and letters. 3 GHI JKL MNO 1/a/A Button 4 - Selects numbers and letters. (SuperSign PQRS TUV WXYZ input only). 4 1/a/A CLEAR - * # Volume Up/Down Button 5 MARK - Adjusts the volume. ARC 5 P
Inhaltszusammenfassung zur Seite Nr. 8
Using the Remote Control ENERGY SAVING Button 14 14 - Adjusts the Energy Saving mode of the set. MONITOR ENERGY INPUT INPUT Select Button 15 15 ON OFF Accesses the Input Signal Window. SAVING Selects the signal type you want using ◄ ►. . , ! ABC DFG Input List GHI JKL MNO AV Component RGB HDMI/DVI SuperSign PQRS TUV WXYZ 16 CLEAR Button 1/a/A CLEAR 16 - * # - Deletes the numbers and letters you typed 17 MARK (SuperSign input only). ARC 18 P BRIGHT A ARC Button PSM 17 G NESS E - Sele
Inhaltszusammenfassung zur Seite Nr. 9
Part Names and Functions * The set image in the user's guide may be different from the actual image. Rear View 1 2 3 4 5 6 7 8 Power Connector 1 Connect the power cord. RS-232C Serial Ports 2 RGB, HDMI/DVI Ports 3 HDMI supports high definition input and HDCP (High-bandwidth Digital Content Protection). Some devices require HDCP in order to display HD signals. 4 PC Sound Jack Connect the audio cable to the LINE OUT* jack of the PC sound card. AV Ports 5 USB Port 6 LAN Port 7 Speaker Ports
Inhaltszusammenfassung zur Seite Nr. 10
Connecting to External Devices Connecting to Your PC Check that the computer, monitor and the peripherals are turned off. Then, connect the 1 signal input cable. A. Connecting with a D-Sub Signal Input Cable. Connecting with an HDMI-DVI Signal Input Cable (not included) B. * When HDMI PC is used, a compatibility problem may occur. A. PC Rear back of the set. PC/MAC MAC Macintosh Adapter (not included) Use the standard Macintosh adapter since an incompatible adapter that uses a different si
Inhaltszusammenfassung zur Seite Nr. 11
Connecting to External Devices Press Power. 4 1. Power button Turn on the PC. 2. Select an input signal. 5 Press INPUT on the remote control to select the input signal. INPUT → ◄ ► → OK Or, press SOURCE on the bottom of the set. SOURCE →◄ ► → AUTO/SET A. Connecting with a D-Sub Signal Input Cable. Select RGB: 15-pin D-Sub analog signal. Input List AV Component RGB HDMI/DVI SuperSign Connecting with an HDMI to DVI Signal Input Cable. B. Select HDMI/DVI: DVI Digital signal or HDMI Digital
Inhaltszusammenfassung zur Seite Nr. 12
Connecting to External Devices Using the LAN 1 Connect the LAN cable as shown below. Using a Router (Switch). A. Connect PC to Monitor. B. LAN LAN Switch Set PC Set PC Using the Internet. C. Network LAN Network Set PC Network Connect the LAN cable and install the eZ-Net Manager program on the CD-ROM. 2 For more information about the program, please refer to the eZ-Net Guide on the included CD-ROM. Note • Using a LAN establishes communication between your PC and the set and enables use of the
Inhaltszusammenfassung zur Seite Nr. 13
Connecting to External Devices Daisy Chaining Set Using RGB Input A. To use different set connected to each other, connect one end of the signal input cable (15-pin D-Sub signal cable) to the RGB OUT connector of set 1 and connect the other end to the RGB IN connector of other set. 15-pin D-Sub Signal Cable PC PC Set 1 Set 2 Set 3 Set 4 Using AV Input B. Audio Cable (not included) Video/TV BNC Cable (not included) Set 1 Set 2 Set 3 • The number of set that can be connected to one output may
Inhaltszusammenfassung zur Seite Nr. 14
Connecting to External Devices VESA FDMI Wall Mounting This set supports a VESA FDMI compliant mounting interface. These mounts are purchased separately and are not available from LG. Refer to the instructions included with your wall mount for more info. Kensington Security Slot The set is equipped with a Kensington Security System connector on the back panel. The cable and lock are available separately and are not sold by LG. For more info, visit http://www.kensington. com. Note • The
Inhaltszusammenfassung zur Seite Nr. 15
Connecting to External Devices Cable Management - Only on some models. Arrange the cables in the center as shown in the following picture. 1. 2. Fit the cable guide to the back to help manage the cables. Removing the cable guide. Cable Management Hold the Cable management with both hands and pull it downward. Note • Do not use the cable management as a handle for the Monitor. 15
Inhaltszusammenfassung zur Seite Nr. 16
Connecting to External Devices Video Input Connect the video cable as shown below and then connect the power cord 1 (see page 10). Connecting with a BNC Cable • Connect the input terminal with a proper color match. Set BNC Cable Audio Cable (not included) (not included) VCR/DVD Receiver Select an input signal. 2 Press INPUT on the remote control to select the input signal. INPUT → ◄ ► → OK Or, press SOURCE on the bottom of the set. SOURCE →◄ ► → AUTO/SET Connecting with a BNC Cable Sel
Inhaltszusammenfassung zur Seite Nr. 17
Connecting to External Devices Component Input (480i/480p/576i/576p/720p/1080i/1080p) Connect the AV cable as shown in the below figure, then connect the power cord (see page 10). 1 • Connect the input terminal with the matching color. Set BNC Cable Audio Cable (not included) (not included) HDTV Receiver Note: - Some devices may require HDCP in order to display HD signals. - Component doesn't support HDCP. Select an input signal. 2 Press INPUT on the remote control to select the input signal.
Inhaltszusammenfassung zur Seite Nr. 18
Connecting to External Devices HDMI Input (480p/576p/720p/1080i/1080p) HDMI supports high definition input and HDCP (High-bandwidth Digital Content Protection). Some devices require HDCP in order to display HD signals. Connect the AV cable as shown below and connect the power cord (see page 10). 1 Set Set RCA-PC HDMI-DVI Signal Cable Audio Cable HDMI Signal Cable (not included) (not included) (not included) VCR/DVD/Set-top Box VCR/DVD/Set-top Box Note: Dolby Digital is not supported. Selec
Inhaltszusammenfassung zur Seite Nr. 19
User Menus Screen Adjustment Options 7 2 6 3 4 5 1 Turns the set on/off. 1 Power Button This Indicator lights up green when the set is operating 2 Power Indicator normally (on mode). If the set is in sleep mode (Energy Saving), the indicator color changes to amber. Shows/hides the OSD (On-Screen Display) menu. MENU Button 3 Selects an icon or adjusts the setting in the OSD menu. OSD Select / 4 Adjust Button ▲ ▼ Adjusts up and down. Volume 35 ◄ ► Adjusts the volume. 19
Inhaltszusammenfassung zur Seite Nr. 20
User Menus Screen Adjustment Options AUTO/SET Button 5 [For PC Analog signal] Auto in progress For optimal display change resolution to 1920 x 1080 [When XGA Mode is active and 1920 x 1080 is selected] Auto in progress SOURCE → ◄ ► → AUTO/SET 6 SOURCE Button - Toggles between inputs A V Composite Video Component HDTV, DVD RGB 15-pin D-Sub analog signal HDMI/DVI Digital signal SuperSign SupeSign Input List AV Component RGB HDMI/DVI SuperSign The sensor from which the set
