Inhaltszusammenfassung zur Seite Nr. 1
L2440p Wide Flat Panel Monitor
User's Guide
Inhaltszusammenfassung zur Seite Nr. 2
Product numbers 4420-HB2 First Edition (September 2008) © Copyright Lenovo 2008. All rights reserved. LENOVO products, data, computer software, and services have been developed exclusively at private expense and are sold to governmental entities as commercial items as defined by 48 C.F.R. 2.101 with limited and restricted rights to use, reproduction and disclosure. LIMITED AND RESTRICTED RIGHTS NOTICE: If products, data, computer software, or services are delivered pursuant a General Services A
Inhaltszusammenfassung zur Seite Nr. 3
Contents Safety information ........................................................................................................ iii Chapter 1. Getting started ......................................................................................... 1-1 Shipping contents .......................................................................................................................................................... 1-1 Product overview ................................................
Inhaltszusammenfassung zur Seite Nr. 4
Safety information © Copyright Lenovo 2008. iii
Inhaltszusammenfassung zur Seite Nr. 5
Chapter 1. Getting started ® This User’s Guide contains detailed information on the ThinkVision L2440p Wide Flat Panel Monitor. For a quick overview, please see the Setup Poster that was shipped with your monitor. Shipping contents The product package should include the following items: · Setup Poster · Monitor Safety, Troubleshooting, and Warranty Guide · Reference and Driver CD · ThinkVision L2440p Wide Flat Panel Monitor · Power Cord · Digital Cable - Attached to monitor · Analog Signal Cable
Inhaltszusammenfassung zur Seite Nr. 6
Product overview This section will provide information on adjusting monitor positions, setting user controls, and using the cable lock slot. Types of adjustments Tilt Please see the illustration below for an example of the tilt range. 0 30 Swivel With the built-in pedestal, you can tilt and swivel the monitor for the most comfortable viewing angle. o o -45 45 1-2 L2440p Wide Flat Panel Monitor User’s Guide
Inhaltszusammenfassung zur Seite Nr. 7
Height Adjustment After pressing the top of the monitor, remove the fixed pin and adjust the height of the monitor. 110mm Monitor Pivot O 90 - Adjust height to the top position before rotation the monitor. . - Rotate clockwise until the monitor stops at 90° User controls Your monitor has controls on the front which are used to adjust the display. For information on how to use these controls, please see “Adjusting your monitor image” on page 2-3. Chapter 1. Getting started 1-3
Inhaltszusammenfassung zur Seite Nr. 8
Cable lock slot Your monitor is equipped with a cable lock slot located on the rear of your monitor (in the lower left corner). Please follow the instructions that came with the cable lock to attach it. Setting up your monitor This section provides information to help you set up your monitor. Connecting and turning on your monitor Note: Be sure to read the Safety Information located in the Monitor Safety, Troubleshooting, and Warranty Guide before carrying out this procedure. 1. Power off your c
Inhaltszusammenfassung zur Seite Nr. 9
Connect the analog signal cable to the D-SUB connector of the monitor and the other end on the back of the computer. Connect one end of the USB hub cable to the USB connector on the back of the computer, and the other end to the upstream USB connector on the monitor. Chapter 1. Getting started 1-5
Inhaltszusammenfassung zur Seite Nr. 10
Plug the monitor power cord and the computer cord into grounded electrical outlets. Note: A certified power supply cord has to be used with this equipment. The relevant national installation and/or equipment regulations shall be considered. A certified power supply cord not lighter than ordinary polyvinyl chloride flexible cord 2 according to IEC 60227 (designation H05VV-F 3G 0.75mm or H05VVH2-F2 3G 2 0.75mm ) shall be used. Alternative a flexible cord be of synthetic rubber according 2 to IEC 6
Inhaltszusammenfassung zur Seite Nr. 11
Rotate the head of the monitor into portrait view. Chapter 1. Getting started 1-7
Inhaltszusammenfassung zur Seite Nr. 12
Place the cables through the Main Clip. Then fasten the clip. Wrap the Cable Wrapper around the cables. 1-8 L2440p Wide Flat Panel Monitor User’s Guide
Inhaltszusammenfassung zur Seite Nr. 13
Remove the Rubber Cover from the back of the stand. Replace the Cable Cover. Chapter 1. Getting started 1-9
Inhaltszusammenfassung zur Seite Nr. 14
Power on the monitor and the computer. To install the monitor driver, insert the Reference and Driver CD, click Install driver, and follow the on-screen instructions. To optimize your monitor image, if using the analog cable, press the Automatic Image Setup key. Automatic image setup requires that the monitor is warmed up for at least 15 minutes. This is not required if you are using the DVI cable. Note: If automatic image setup does not establish the image that you prefer, perform manual image
Inhaltszusammenfassung zur Seite Nr. 15
Registering your option ® Thank you for purchasing this Lenovo product. Please take a few moments to register your product and provide us with information that will help Lenovo to better serve you in the future. Your feedback is valuable to us in developing products and services that are important to you, as well as in developing better ways to communicate with you. Register your option on the followingWeb site: http://www.lenovo.com/register Lenovo will send you information and updates on your
Inhaltszusammenfassung zur Seite Nr. 16
Chapter 2. Adjusting and using your monitor This section will give you information on adjusting and using your monitor. Comfort and accessibility Good ergonomic practice is important to get the most from your personal computer and to avoid discomfort. Arrange your workplace and the equipment you use to suit your individual needs and the kind of work that you perform. In addition, use healthy work habits to maximize your performance and comfort while using your computer. For more detailed informa
Inhaltszusammenfassung zur Seite Nr. 17
· Tilt: Adjust the tilt of your monitor to optimize the appearance of the screen content and to accommodate your preferred head and neck posture. · General location: Position your monitor to avoid glare or reflections on the screen from overhead lighting or nearby windows. The following are some other tips for comfortable viewing of your monitor: · Use adequate lighting for the type of work you are performing. · Use the monitor brightness, contrast, and image adjustment controls, if equipped, to
Inhaltszusammenfassung zur Seite Nr. 18
Accessibility information Lenovo is committed to providing greater access to information and technology to people with disabilities. With assistive technologies, users can access information in the way most appropriate to their disability. Some of these technologies are already provided in your operating system; others can be purchased through vendors or accessed at: http://www.ibm.com/able/ Adjusting your monitor image This section describes the user control features used to adjust your monitor
Inhaltszusammenfassung zur Seite Nr. 19
To use the controls: 1. Press to open the main OSD menu. 2. Use or to move among the icons. Select an icon and press to access that function. If there is a sub-menu, you can move between options using or , then press to select that function. Use or to make adjustments. Press to save. 3. Press to move backwards through the sub-menus and exit from the OSD. 4. Press and hold for 10 seconds to lock the OSD. This will prevent accidental adjustments to the OSD. Press and hold for 10 secon
Inhaltszusammenfassung zur Seite Nr. 20
Table 2-2. OSD functions OSD Icon Submenu Description Controls and Controls on Main Adjustments and Menu (Analog) Adjustments (Digital) Adjusts overall brightness Same as Brightness Analog Brightness- Adjusts difference between light and dark areas /Contrast Contrast Moves the image left or right. Controls Image Horizontal Position Locked not Position required for Moves the image up or down. digital input Vertical Position Automatically optimizes the image. Image Automatic Setup Manually optimiz
