Inhaltszusammenfassung zur Seite Nr. 1
L2062 Wide Flat Panel Monitor
User’s Guide
Inhaltszusammenfassung zur Seite Nr. 2
Product numbers 1173-HB1 L2062wA First Edition ( January 2011 ) © Copyright Lenovo 2011. LENOVO products, data, computer software, and services have been developed exclusively at private expense and are sold to governmental entities as commercial items as defined by 48 C.F.R. 2.101 with limited and restricted rights to use, reproduction and disclosure. LIMITED AND RESTRICTED RIGHTS NOTICE: If products, data, computer software, or services are delivered pursuant a General Servi
Inhaltszusammenfassung zur Seite Nr. 3
Contents Safety information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . iii Chapter1. Getting started . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-1 Shipping contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-1 Atta
Inhaltszusammenfassung zur Seite Nr. 4
Safety information General Safety guidelines For tips to help you use your computer safely,go to: http://www.lenovo.com/safety Before installing this product, read the Safety information. DANGER To avoid shock hazard: Do not remove the covers. v Do not operate this product unless the stand is attached. v Do not connect or disconnect this product during an electrical storm. v The power cord plug must be connected to a properly wired and grounded power v outlet. Any equipment to w
Inhaltszusammenfassung zur Seite Nr. 5
Chapter 1. Getting started This User’s Guide contains detailed information of your Flat Panel Monitor. For a quick overview, please see the Setup Poster that was shipped with your monitor. Shipping contents The product package should include the following items: • Setup Poster • Reference and Driver CD • Flat Panel Monitor • Power Cord • Analog Interface Cable Attaching the base and handling your monitor To set up your monitor, please see the illustrations below. Note: Do not touch the
Inhaltszusammenfassung zur Seite Nr. 6
Product overview This section will provide information on adjusting monitor positions, setting user controls, and using the cable lock slot. Adjusting the tilt The illustration below shows the tilt range of the monitor. For more information, see “Positioning your monitor” on page 2-1. Monitor controls Your monitor has controls on the front which are used to adjust the display. For information on how to use these controls, please see “Adjusting your monitor image” on page 2-3. Chapter
Inhaltszusammenfassung zur Seite Nr. 7
Cable lock slot Your monitor is equipped with a cable lock slot located on the rear of your monitor (in the lower position). Please see the instructions that come with the cable lock to learn how to using it. Setting up your monitor This section provides information on how to set up your monitor. Connecting and turning on your monitor Note: Be sure to read the Safety information located on page iii before carrying out this procedure . 1. Power off your computer and all attached d
Inhaltszusammenfassung zur Seite Nr. 8
4. Insert the power cord into the monitor , then plug the monitor power cord and the computer cord into grounded electrical outlets. Place the cable into the cable clip indicated in below figure. Note: A certified power supply cord has to be used with this equipment. The relevant national installation and/or equipment regulations shall be considered. A certified power supply cord not lighter than ordinary polyvinyl chloride flexible cord according to IEC 60227 (designation H05VV-F 3G 0.75mm2
Inhaltszusammenfassung zur Seite Nr. 9
To install the monitor driver, insert the Reference and Driver CD, click Install 7 7 . driver, and follow the on-screen instructions. 8. To optimize your monitor image, press the Automatic Image Setup key. Automatic image setup requires that the monitor is warmed up for at least 15 minutes. This is not required for normal operation. Note: If automatic image setup does not establish the image that you prefer, perform manual image setup. See “Manual image setup” on page 3-3 . Registering y
Inhaltszusammenfassung zur Seite Nr. 10
Chapter 2. Adjusting and using your monitor This section will give you information on adjusting and using your monitor. Comfort and accessibility Good ergonomic practice is important to get the most from your personal computer and to avoid discomfort. Arrange your workplace and the equipment you use to suit your individual needs and the kind of work that you perform. In addition, use healthy work habits to maximize your performance and comfort while using your computer. For more detailed inf
Inhaltszusammenfassung zur Seite Nr. 11
• Use the monitor brightness, contrast, and image adjustment controls, if equipped, to optimize the image on your screen to meet your visual preferences. • Keep your monitor screen clean so you can focus on the screen’s contents. Any concentrated and sustained visual activity can be tiring for your eyes. Be sure to periodically look away from your monitor screen and focus on a far object to allow your eye muscles to relax. If you have questions on eye fatigue or visual discomfort, consult
Inhaltszusammenfassung zur Seite Nr. 12
Adjusting your monitor image This section describes the control features to adjust your monitor image. Using the direct access controls The direct access controls can be used when the On Screen Display (OSD) is not displayed. Table 2-1. Direct access controls Icon Control Description Input Change Switches the video input source DDC/CI Press and hold for 10 seconds to enable or disable the DDC/CI function Exit Exit from menu Image Setup Activates automatic image adjustment Novo Vision Di
Inhaltszusammenfassung zur Seite Nr. 13
Using the On-Screen Display (OSD) controls To adjust the settings, the user controls can be viewed through the OSD. Brightness/Contrast Brightness Contrast Exit Left Right Ok To use the controls: 1. Press to open the main OSD menu. 2. Use or to move among the icons. Select an icon and press to access that function. If there is a sub-menu, you can move between options using or , then press to select tha
Inhaltszusammenfassung zur Seite Nr. 14
Table 2-2. OSD functions Controls and Controls and OSD Icon on Main Submenu Description Adjustments Adjustments Menu (Analog) (Digital) Adjusts overall screen Same as Analog brightness. Brightness Brightness/ Contrast Adjusts difference between light and dark areas. Contrast Moves image left or right. Digital input not applicable Horizontal Position Image Position Moves image up or down. Vertical Position Optimizes image (size,position,phase, and clock). Automatic Manually
Inhaltszusammenfassung zur Seite Nr. 15
Table 2-2. OSD functions Controls and Controls and OSD Icon on Main Submenu Description Adjustments Adjustments Menu (Analog) (Digital) Same as Analog Selects type of scaled image. • Original AR: Same Aspect Ratio with input Signal. Scaling • Full Screen :Expand image to full screen. Screen Prioritization Text Mode • Web pic Mode • Novo Vision • Video Mode Split-screen Display • Shows resolution, refresh rate, and product details. Same as Analog Note: This screen does not allow a
Inhaltszusammenfassung zur Seite Nr. 16
Selecting a supported display mode The display mode the monitor uses is controlled by the computer. Therefore, refer to your computer documentation for details on how to change display modes. The image size, position and shape might change when the display mode changes. This is normal and the image can be readjusted using automatic image setup and the image controls. Unlike CRT monitors, which require a high refresh rate to minimize flicker, LCD or Flat Panel technology is inherently flicker
Inhaltszusammenfassung zur Seite Nr. 17
Understanding power management Power management is invoked when the computer recognizes that you have not used your mouse or keyboard for a user-definable period. There are several states as described in the table below. For optimal performance, switch off your monitor at the end of each working day, or whenever you expect to leave it unused for long periods during the day. Table 2-4. Power indicator Restoring State Power Indicator Screen Operation Compliance On Steady white Normal S
Inhaltszusammenfassung zur Seite Nr. 18
Caring for your monitor Be sure to turn off the power before you perform any maintenance on the monitor. Do not: • Apply water or liquid directly to your monitor. • Use solvents or abrasives. • Use flammable cleaning materials to clean your monitor or any other electrical equipment. • Touch the screen area of your monitor with sharp or abrasive items. This type of contact may cause permanent damage to your screen. • Use any cleaner which contains an anti-static solution or similar additives.
Inhaltszusammenfassung zur Seite Nr. 19
Chapter 3. Reference information This section contains monitor specifications, troubleshooting information and instructions to manually install the monitor driver. Monitor specifications Table 3-1. Monitor specifications for type-model L2062wA Dimensions Height 362.5 mm (14.27 in) Depth 174.8 mm (6.88 in) Width 480.0 mm (18.90 in) Stand Tilt Range: -5°, +20° VESA mount Supported 100mmx100 mm (3.94 inx3.94 in ) Image Viewable image size 508.0 m
Inhaltszusammenfassung zur Seite Nr. 20
Troubleshooting If you have a problem setting up or using your monitor, you might be able to solve it yourself. Before calling your dealer or Lenovo, try the suggested actions that are appropriate to your problem. Table 3-2. Troubleshooting Problem Possible cause Suggested action Reference The words "Out The system is set to a If you are replacing an “Selecting a of Range" are display mode which old monitor, reconnect it supported display shown on the is not supported by and adjust the d
