Bedienungsanleitung JVC TM-A130SU

Inhaltszusammenfassung zur Seite Nr. 1

COLOR VIDEO MONITOR
INSTRUCTIONS
TM-A130SU
For Customer Use:
Enter below the Serial No. which is located on the rear of
the cabinet. Retain this information for future reference.
– + B A
ON
OFF
Model No. : TM-A130SU
INPUT SELECT
PHASE CHROMA BRIGHT CONTRAST MENU VOLUME/SELECT
POWER
TM-A130SU
Serial No. :

Inhaltszusammenfassung zur Seite Nr. 2

Thank you for purchasing this JVC color video monitor. Before using it, read and follow all instructions carefully to take full advantage of the monitor's capabilities. SAFETY PRECAUTIONS FCC INFORMATION (U.S.A. only) WARNING : CAUTION: Changes or modification not approved by TO PREVENT FIRE OR SHOCK HAZARDS, DO NOT JVC could void the user's authority to operate the EXPOSE THIS MONITOR TO RAIN OR MOISTURE. equipment. NOTE: This equipment has been tested and found to comply with the limits for a

Inhaltszusammenfassung zur Seite Nr. 3

CONTENTS SAFETY PRECAUTIONS .......................................................................................... 2 CONTROLS AND FEATURES ................................................................................... 4 HOW TO HANDLE BASIC OPERATIONS ................................................................ 6 HOW TO USE THE MENU FUNCTIONS................................................................... 7 HOW TO INITIALIZE THE SETTING ............................................

Inhaltszusammenfassung zur Seite Nr. 4

CONTROLS AND FEATURES FRONT VIEW + B A – ON OFF INPUT SELECT PHASE CHROMA BRIGHT CONTRAST MENU VOLUME/SELECT POWER TM-A130SU – + B A ON OFF PHASE CHROMA BRIGHT CONTRAST MENU VOLUME/SELECT INPUT SELECT POWER TM-A130SU 8 Input A button [INPUT SELECT A] 1 Phase button [PHASE ] Selects the video signal input to the VIDEO A terminal Press this button to set the picture hue adjustment mode. (BNC connector) and the audio signal input to the AUDIO Adjust the value with the VOLUME/SELECT

Inhaltszusammenfassung zur Seite Nr. 5

REAR VIEW VIDEO AUDIO A BAB IN IN Y/C IN IN OUT OUT OUT VIDEO AUDIO A BAB IN IN Y/C IN IN OUT OUT OUT To AC outlet (120 V AC, 50/60 Hz) 14 Video A terminals [VIDEO A IN/OUT] 16 Audio A terminals [AUDIO A IN/OUT] Video signal input (IN) and output (OUT) terminals. Input (IN) and output (OUT) terminals for the audio signals The output terminal is bridge-connected. corresponding to the VIDEO A terminals $. The output IN : Video signal input terminal terminal is bridge-connected. OUT :

Inhaltszusammenfassung zur Seite Nr. 6

HOW TO HANDLE BASIC OPERATIONS BASIC OPERATION Color system indication (NTSC or PAL ) 1. Press the POWER switch to turn on the power. NTSC ON : Power turns ON. (Power indicator: lit) OFF : Power turns OFF. (Power indicator: unlit) ON OFF POWER 2. Press the INPUT SELECT button to choose input. Selects video/audio signals input to terminals on the rear B A panel. With regard to Color system indication c With the COLOR SYSTEM setting set INPUT Terminals on the rear panel to AUTO mode, when you tu

Inhaltszusammenfassung zur Seite Nr. 7

HOW TO USE THE MENU FUNCTIONS DISPLAY AND SELECTION IN THE

SCREEN MODE (SETTING) You can set the following menu items. screen Set them depending on your needs. • SHARPNESS • COLOR SYSTEM 1 < MENU > ä SHARPNESS : 00 COLOR SYSTEM : AUTO 1. Press the MENU button. 3 2 The screen is displayed. MENU EXIT 4 2. Press the PHASE ( ) or CHROMA ( ) button to select MENU items. A selection mark (3) is put next to the selected item. – + Front panel Function

Inhaltszusammenfassung zur Seite Nr. 8

HOW TO USE THE MENU FUNCTIONS (cont'd) DISPLAY AND SELECTIONS IN THE MODE (SETTING) screen You can set the following set-up menu items. c H. POSITION c WHITE BALANCE c CONTROL LOCK 1 ä H. POSITION : 00 WHITE BALANCE Note: CONTROL LOCK : OFF 3 2 c Parameters for H. POSITION can be set separately depending on the video input (Input A or Input B) selected by the input select buttons on the front panel. Select the required video input with the

Inhaltszusammenfassung zur Seite Nr. 9

Set-up menu items Purpose Settings H. POSITION Adjusts the horizontal position of the screen (+ : Horizontal position –05 –04 • • –01 00 +01 • • +04 +05 shifts to the right/–: Horizontal position shifts to the left) WHITE BALANCE Adjusts the white balance Selects DRIVE (DRV) or CUT OFF (CUTO) adjustment. Screen setting is changed to the selected setting mode. Select R/G/B buttons corresponding to the function display to adjust. DRIVE R.DRIVE Adjusts red level –09

Inhaltszusammenfassung zur Seite Nr. 10

HOW TO INITIALIZE THE SETTING SCREEN DISPLAY AND SELECTIONS IN THE RESET MODE You can set

and screen items, picture adjustment items and RESET screen the volume level to their factory-set (initial) values. RESET Are you sure ? 1. Press the POWER ( ) switch to turn the power “Yes” then “No” then <+> or <–> OFF ( ). ON OFF POWER Initial settings 2. While pressing both MENU button and PHASE ( )

Inhaltszusammenfassung zur Seite Nr. 11

BASIC CONNECTION EXAMPLE Notes: c Before connecting your system, make sure that all units are turned off. c The illustration below shows some examples of different connections. Terminal connections may differ depending on the component connected. Be sure to refer to the instructions provided with the unit(s) you are connecting. c Each pair of input (IN) and output (OUT) terminals are bridge-connected. However, the Y/C input terminal (Y/C IN) has no output terminal (OUT) corresponding to it. c If

Inhaltszusammenfassung zur Seite Nr. 12

TROUBLESHOOTING Solutions to common problems related to your monitor are described here. If none of the solutions presented here solves the problem, unplug the monitor and consult a JVC-authorized dealer or service center for assistance. Problems Points to be checked Measures (Remedy) No power supply. Is the power plug loosened or disconnected? Firmly insert the power plug. No picture with the Is the video signal output from the connected Set the connected component correctly. power on. componen

Inhaltszusammenfassung zur Seite Nr. 13

SPECIFICATIONS MODEL TM-A130SU Type Color video monitor Color system NTSC (3.58), PAL Picture tube 13" measured diagonally, 90° deflection, in-line gun, vertical line trio type (phosphor stripe pitch 0.64 mm) Effective screen size Width 11-1/8" (280.8 mm) Height 8-3/8" (210.6 mm) Diagonal 13-1/4" (335.4 mm) Scanning frequency H : 15.734 kHz (NTSC), 15.625 kHz (PAL) V : 59.94 Hz (NTSC), 50 Hz (PAL) Horizontal resolution 320 TV lines or more (NTSC) Input termina

Inhaltszusammenfassung zur Seite Nr. 14

7 Dimensions Unit : Inch (mm) < Front View > < Side View > 14-5/8 (368.5) 1/16 (1.5) 14-3/8 (363.5) 13-5/8 (346) * * 11-3/8 (287) – + B A ON OFF PHASE CHROMA BRIGHT CONTRAST MENU VOLUME/SELECT INPUT SELECT TM-A130SU POWER 2-5/8 11-1/4 (284) (63.7) 10-3/4 (273) * Asterisks ( ) are used to indicate front panel * dimensions. 7 Y/C (Mini DIN 4 pin) terminal specification Pin No. Signal Y/C IN 1 GND (Y) 4 3 2 GND (C) 3Y 1 2 4C 14 8-5/8 (217) 12-1/4 (310) 3/16 (3.5) 1/4 (5)

Inhaltszusammenfassung zur Seite Nr. 15

15

Inhaltszusammenfassung zur Seite Nr. 16

TM-A130SU COLOR VIDEO MONITOR JVC PROFESSIONAL PRODUCTS COMPANY DIVISION OF US JVC CORP. 1700 Vallery Road Wayne, NJ07470 JVC CANADA INC. 21 Finchdene Square, Scarborough Ontario M1X 1A7 LCT0367-002A-H 0699-Tu-U-JMT 1999 VICTOR COMPANY OF JAPAN, LIMITED ©