Inhaltszusammenfassung zur Seite Nr. 1
jWIN
5.5” BLACK & WHITE SECURITY MONITOR
WITH CAMERA
Inhaltszusammenfassung zur Seite Nr. 2
TABLE OF CONTENTS Introduction ................................................................................................. 3 Caution........................................................................................................ 3 Out of the Box.............................................................................................. 4 Front View ................................................................................................... 5 Rear View ........
Inhaltszusammenfassung zur Seite Nr. 3
INTRODUCTION Congratulations on your purchase of the JV-TV2040 and thank you for choosing jWIN . The jWIN monitor with camera has a variety of features that make it an exceptional quality security system for stores, banks, hotels, schools, factories, apartments, with many applications. In addition to the basic operations, it provides a variety of special features designed to increase the effectiveness and ease of providing security. This manual gives you easy-to-follow instructio
Inhaltszusammenfassung zur Seite Nr. 4
OUT OF THE BOX After unpacking, make sure you have all the items shown below. If any are missing, contact your dealer or retailer. Component Diagram Features 5.5” black & white · High resolution monitor · Brightness and contrast controls · Two channels (for two cameras) · Single camera capability · Compatibility with a variety of camera, video and audio outputs · Built in two camera auto switch Weather resistant · High resolution and camera with lens cover sensiti
Inhaltszusammenfassung zur Seite Nr. 5
FRONT VIEW Volume Knob Time Selector Knob Power ON/OFF Button Power Indicator Control Panel Door Control Panel Open/Close Point (Press here to open) With the control panel open, the following items are in view: Function Switch 50/60Hz Switch Choose CH1/CH2/Auto Control Panel Open/Close Fastener -5-
Inhaltszusammenfassung zur Seite Nr. 6
REAR VIEW AC/DC Power input Video Out Socket Audio Out Socket CH1 V-Hold Control CH2 Contrast Control Brightness Control CAMERA VIEW Infrared Lights Integrated Microphone Infrared Lights Camera Bracket DIN Connector -6-
Inhaltszusammenfassung zur Seite Nr. 7
PUTTING IT ALL TOGETHER You will be pleased with the ease of installation of this unit. With just a few quick steps, your unit will be up and running in a very short period of time. 1. Connect the camera to the monitor. Be sure that the power cable is not connected. a. Connect one end of the 60’ cable to the camera cable and connect the other end to the Channel (CH) port on the back of the monitor as follows: If you are using only 1 camera: connect the 60’ cable to the CH1 p
Inhaltszusammenfassung zur Seite Nr. 8
BASIC OPERATIONS These simple steps will enable you to get the best quality sound and image on your closed circuit monitor. 1. Push the power ON/OFF button. The power indicator light comes on. Power ON/OFF Button Power Indicator Light 2. Open the control panel. Control Panel Door 3. Move the function switch to position “CH1” or “CH2” or Auto. Note: Use CH1 or CH2 when using CH1/CH2/AUTO switch only 1 camera. Use Auto when you want to use 2 cameras and switch
Inhaltszusammenfassung zur Seite Nr. 9
VOLUME ADJUSTMENT The jWIN Security Camera has a built-in microphone that delivers high quality sound. You can adjust the sound from your monitor. To increase volume: Turn the volume knob (found on the left side of the unit) toward you. To decrease volume: Turn the volume know away from you. Volume Control TIME ADJUSTMENT If you are using two cameras, you will want to adjust the timer to switch or cycle from one view to another every few seconds. The Time Con
Inhaltszusammenfassung zur Seite Nr. 10
SET UP FOR ALTERNATIVE AUDIO/VIDEO CONNECTIONS The adaptability of the JV-TV2040 enables a variety of set-up possibilities. The diagram below shows how you can connect a single input/camera to several output stations. From this example, you can determine the set up that best meets your needs. Note: The signal from the Audio/Video Out socket is consistent with that of the monitor. The output can be connected to another monitor for viewing or to a VCR for recording. Consistent w
Inhaltszusammenfassung zur Seite Nr. 11
TWO CHANNEL INPUT CONNECTION If you wish to use two cameras and observe both views on one monitor, the following set up will suit your purposes. -11-
Inhaltszusammenfassung zur Seite Nr. 12
SET UP FOR VCR CONNECTION You can use a VCR to record the images captured by your CCTV, the following set up will enable you to do this. A/V OUT A/V IN A/V IN TV JVTV 2040 VCR A/V OUT MUST BE IN VCR MODE. Make sure your TV Click the channel shows the same changer on the VCR image as your until the TV shows the JVTV20 monitor. same image as JVTV2040. If your VCR has a display it will show “Line In”. -12-
Inhaltszusammenfassung zur Seite Nr. 13
TECHNICAL DATA/SPECIFICATIONS Weight: 6.3 lbs Mass: 10.6”x9.3”x8.6” Monitor Power: DC15V 1200mA Power consumption: <20W Camera Resolution: 380 Horizontal TV Lines Signal Noise Ratio: <48dB Min Illumination: 0.5LUX Integrated Lens: 3.6mm View Range: 78 Voltage: 12V/80mA System: EIA Audio Function: Audio Out -13-
