Inhaltszusammenfassung zur Seite Nr. 1
USER MANUAL
ENGLISH
Thank you very much for choosing the iiyama
LCD monitor.
We recommend that you take a few minutes
to read carefully through this brief but
comprehensive manual before installing and
switching on the monitor. Please keep this
manual in a safe place for your
future reference.
Inhaltszusammenfassung zur Seite Nr. 2
ENGLISH
Inhaltszusammenfassung zur Seite Nr. 3
Congratulations! This display is designed for both you and the planet! The display you have just purchased carries the TCO Certified label. This ensures that your display is designed, manufactured and tested according to some of the strictest quality and environmental requirements in the world. This makes for a high performance product, designed with the user in focus that also minimizes the impact on the climate and our natural environment. TCO Certified is a third party verified program,
Inhaltszusammenfassung zur Seite Nr. 4
CE MARKING DECLARATION OF CONFORMITY This LCD monitor complies with the requirements of the EC Directive 2004/108/EC “EMC Directive” , 2006/95/EC “Low Voltage Directive” and 2005/32/EC “EuP Directive”. The electro-magnetic susceptibility has been chosen at a level that gives correct operation in residential areas, business and light industrial premises and small-scale enterprises, inside as well as outside of the buildings. All places of operation are characterised by their connection to the
Inhaltszusammenfassung zur Seite Nr. 5
TABLE OF CONTENTS FOR YOUR SAFETY .............................................................................................. 1 SAFETY PRECAUTIONS ................................................................................ 1 SPECIAL NOTES ON LCD MONITORS .......................................................... 3 CUSTOMER SERVICE .................................................................................... 3 CLEANING ...........................................................
Inhaltszusammenfassung zur Seite Nr. 6
FOR YOUR SAFETY SAFETY PRECAUTIONS WARNING STOP OPERATING THE MONITOR WHEN YOU SENSE TROUBLE If you notice any abnormal phenomena such as smoke, strange sounds or fumes, unplug the monitor and contact your dealer or iiyama service center immediately. Further use may be dangerous and can cause fi re or electric shock. NEVER REMOVE THE CABINET High voltage circuits are inside the monitor. Removing the cabinet may expose you to the danger of fi re or electric shock. DO NOT PUT ANY OBJECT INTO THE
Inhaltszusammenfassung zur Seite Nr. 7
CAUTION INSTALLATION LOCATION Do not install the monitor where sudden temperature changes may occur, or in humid, dusty or smoky areas as it may cause fi re, electric shock or damage. You should also avoid areas where the sun shines directly on the monitor. DO NOT PLACE THE MONITOR IN A HAZARDOUS POSITION The monitor may topple and cause injury if not suitably located. Please also ensure that you do not place any heavy objects on the monitor, and that all cables are routed such that children m
Inhaltszusammenfassung zur Seite Nr. 8
SPECIAL NOTES ON LCD MONITORS The following symptoms are normal with LCD monitors and do not indicate a problem. When you fi rst turn on the LCD monitor, the picture may not fi t in the display area NOTE because of the type of computer that is used. In this case, adjust the picture position to the correct position. Due to the nature of the backlight, the screen may fl icker during initial use. Turn off the Power Switch and then turn it on again to make sure the fl icker disappears. You may fi
Inhaltszusammenfassung zur Seite Nr. 9
BEFORE YOU OPERATE THE MONITOR FEATURES Supports Resolutions up to 1280 × 1024 2 High Contrast 800:1 (Typical) , ACR Function Available / Brightness 250cd/m (Typical) / Quick Response Time 5ms (Typical) Digital Character Smoothing Automatic Set-up Stereo Speakers 2 × 1W Stereo Speakers Plug & Play VESA DDC2B Compliant ® Windows 95/98/2000/Me/XP/Vista/7 Compliant ® Power Management (ENERGY STAR VESA DPMS Compliant) Ergonomic Design: TCO5.2 VESA Mounting Standard (100mm×100
Inhaltszusammenfassung zur Seite Nr. 10
FITTING AND REMOVAL OF BASE : ProLite B1906S The monitor is supplied complete with a stand-base. If you prefer to wall mount the monitor, please follow the instructions below to remove the stand-base. Be sure to include the stand with the monitor if it is necessary to return the unit. CAUTION Put the monitor on a stable surface. The monitor may cause injury or damage if it falls or is dropped. Do not give a strong impact to the monitor. It may cause damage. Unplug the monitor before rem
Inhaltszusammenfassung zur Seite Nr. 11
FITTING AND REMOVAL OF BASE : ProLite E1906S Install the stand on a stable surface. The monitor may cause injury or damage if it CAUTION falls or is dropped. Do not give a strong impact to the monitor. It may cause damage. Unplug the monitor before installation to avoid electric shock or damage. Put a piece of soft cloth on the table beforehand to prevent the monitor from being scratched. A Lay the monitor fl at on a table with front face down. Hold the monitor and pu
Inhaltszusammenfassung zur Seite Nr. 12
CONTROLS AND CONNECTORS : ProLite B1906S Power Switch ( ) A Menu / Select Button (MENU) B + / Volume Button ( + ) C - / ECO Button ( - ) D Auto Button (AUTO) E Power Indicator F Blue: Normal operation NOTE Orange: Power Management The monitor enters into power management mode which reduces the power consumption to less than 1W when receiving no horizontal and/or vertical sync signal. Speakers G D-SUB mini 15pin Connector (D-SUB) H DVI-D 24pin Conne
Inhaltszusammenfassung zur Seite Nr. 13
CONTROLS AND CONNECTORS : ProLite E1906S Power Switch ( ) A Menu / Select Button (MENU) B + / Volume Button ( + ) C - / ECO Button ( - ) D Auto Button (AUTO) E Power Indicator F Blue: Normal operation NOTE Orange: Power Management The monitor enters into power management mode which reduces the power consumption to less than 1W when receiving no horizontal and/or vertical sync signal. Speakers G D-SUB mini 15pin Connector (D-SUB) H DVI-D 24pin Conne
Inhaltszusammenfassung zur Seite Nr. 14
CONNECTING YOUR MONITOR : ProLite B1906S Ensure that both the computer and the monitor are switched off. A Connect the computer to the monitor with the signal cable. B Connect the monitor to the audio equipment with the Audio Cable for computer when using the C audio features. Connect the Power Cable to the monitor fi rst and then to the power supply. D Power of the monitor and the computer is turned on. E NOTE The signal cables used for connecting the computer and monitor may vary with th
Inhaltszusammenfassung zur Seite Nr. 15
CONNECTING YOUR MONITOR : ProLite E1906S Ensure that both the computer and the monitor are switched off. A Connect the computer to the monitor with the signal cable. B Connect the monitor to the audio equipment with the Audio Cable for computer when using the C audio features. Connect the Power Cable to the monitor fi rst and then to the power supply. D Power of the monitor and the computer is turned on. E NOTE The signal cables used for connecting the computer and monitor may vary with th
Inhaltszusammenfassung zur Seite Nr. 16
COMPUTER SETTING Signal Timing Change to the desired signal timing listed on page 29: COMPLIANT TIMING. Windows 95/98/2000/Me/XP/Vista/7 Plug & Play The iiyama LCD monitor complies with DDC2B of VESA standard. The Plug & Play function runs on Windows 95/98/2000/Me/XP/Vista/7 by connecting the monitor to DDC2B compliant computer with the Signal Cable supplied. For installation on Windows 95/98/2000/Me/XP: The monitor Information File for iiyama monitors may be necessary for your compu
Inhaltszusammenfassung zur Seite Nr. 17
ADJUSTING THE HEIGHT AND THE VIEWING ANGLE : ProLite B1906S For optimal viewing it is recommended to position yourself directly opposite to the full face of the monitor, then adjust the monitor’s height and angle to your own preference. Hold the panel so that the monitor does not topple when you change the monitor’s height or angle. 110mm You are able to adjust the monitor's height up to 110mm, angle up to 170 degrees right and left, 20 degrees upward. NOTE Do not touch the LCD s
Inhaltszusammenfassung zur Seite Nr. 18
OPERATING THE MONITOR To create the best picture, your iiyama LCD monitor has been preset at the factory with the COMPLIANT TIMING shown on page 29. You are also able to adjust the picture by following the button operation shown below. For more detailed adjustments, see page 20 for SCREEN ADJUSTMENTS. Press the MENU Button to start the On Screen Display feature. There are additional Menu items which can be switched by using the + / - Buttons. Luminance Contrast 50 Brightness 50 Eco Off P
Inhaltszusammenfassung zur Seite Nr. 19
ADJUSTMENT MENU CONTENTS Luminance Luminance Contrast 50 Brightness 50 Eco Off Picture Mode Standard ACR ON Adjustment Item Problem / Option Button to Press Too dull Contrast Too intense Too dark Brightness * Too bright Off Normal Mode1 Brightness of back-light is reduced. Direct Eco Mode2 Brightness of back-light is reduced more than Mode1. Brightness of back-light is reduced more than Mode2. Mode3 Standard For general windows environment and monitor defa
Inhaltszusammenfassung zur Seite Nr. 20
Image Setup Image Setup Clock 50 Only Analog Input Phase 50 H.Position 50 V.Position 50 Adjustment Item Problem / Option Button to Press Too narrow Clock* Too wide Phase* To correct fl ickering text or lines Too left H. Position Too right Too low V. Position Too high * See page 20 for SCREEN ADJUSTMENTS. 15 OPERATING THE MONITOR ENGLISH
