Inhaltszusammenfassung zur Seite Nr. 1
USER MANUAL
ENGLISH
ENGLISH
DEUTSCH
FRANCAIS
NEDERLANDS
Thank you very much for choosing the iiyama
LCD monitor.
We recommend that you take a few minutes to
read carefully through this brief but
comprehensive manual before installing and
switching on the monitor. Please keep this
manual in a safe place for your future
reference.
Inhaltszusammenfassung zur Seite Nr. 2
Congratulations! The display you have just purchased carries the TCO’03 Displays label. This means that your display is designed, manufactured and tested according to some of the strictest quality and environmental requirements in the world. This makes for a high performance product, designed with the user in focus that also minimizes the impact on our natural environment. Some of the features of the TCO’03 Display requirements: Ergonomics • Good visual ergonomics and image quality in order to i
Inhaltszusammenfassung zur Seite Nr. 3
FCC DECLARATION OF CONFORMITY Model Number: PL2201W / PL2202W Trade Name: iiyama Responsible party: Ampronix Inc. Address: 8697 Research Dr. Irvine, CA.92618 U.S.A. Telephone number: 949-788-9930 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This device has been tested
Inhaltszusammenfassung zur Seite Nr. 4
TABLE OF CONTENTS FOR YOUR SAFETY ..................................................................................... 1 SAFETY PRECAUTIONS ........................................................................ 1 SPECIAL NOTES ON LCD MONITORS .................................................... 3 CUSTOMER SERVICE ............................................................................. 3 CLEANING .............................................................................................
Inhaltszusammenfassung zur Seite Nr. 5
FOR YOUR SAFETY SAFETY PRECAUTIONS WARNING STOP OPERATING THE MONITOR WHEN YOU SENSE TROUBLE If you notice any abnormal phenomena such as smoke, strange sounds or fumes, unplug the monitor and contact your dealer or iiyama service center immediately. Further use may be dangerous and can cause fire or electric shock. NEVER REMOVE THE CABINET High voltage circuits are inside the monitor. Removing the cabinet may expose you to the danger of fire or electric shock. DO NOT PUT ANY OBJECT INTO THE MON
Inhaltszusammenfassung zur Seite Nr. 6
CAUTION INSTALLATION LOCATION Do not install the monitor where sudden temperature changes may occur, or in humid, dusty or smoky areas as it may cause fire, electric shock or damage. You should also avoid areas where the sun shines directly on the monitor. DO NOT PLACE THE MONITOR IN A HAZARDOUS POSITION The monitor may topple and cause injury if not suitably located. Please also ensure that you do not place any heavy objects on the monitor, and that all cables are routed such that children may
Inhaltszusammenfassung zur Seite Nr. 7
SPECIAL NOTES ON LCD MONITORS The following symptoms are normal with LCD monitors and do not indicate a problem. When you first turn on the LCD monitor, the picture may not fit in the display area NOTE because of the type of computer that is used. In this case, adjust the picture position to the correct position. Due to the nature of the backlight, the screen may flicker during initial use. Turn off the Power Switch and then turn it on again to make sure the flicker disappears. You may find s
Inhaltszusammenfassung zur Seite Nr. 8
BEFORE YOU OPERATE THE MONITOR FEATURES ProLite E2201W : 56cm (22") TFT Color LCD Monitor ProLite E2202WS / E2202WSV : 55cm (22") TFT Color LCD Monitor Supports Resolutions up to 1680 × 1050 2 High Contrast 2000:1(DCR) / High Brightness 300cd/m / Quick Response Time 2ms (Gray to Gray): ProLite E2201W 2 High Contrast 2000:1(DCR) / High Brightness 300cd/m : ProLite E2202WS / E2202WSV Multi-Color Control Supports sRGB International Standard Gamma Control Clear Displa
Inhaltszusammenfassung zur Seite Nr. 9
CHECKING THE CONTENTS OF THE PACKAGE The following accessories are included in your package. Check to see if they are enclosed with the monitor. If anything is missing or damaged, please contact your local iiyama dealer or regional iiyama office. 1 Power Cable* D-Sub Signal Cable 2 3 DVI-D Signal Cable* Audio Cable* Stand Cable Holder User Manual 1 CAUTION * The rating of the Power Cable enclosed in 120V area is 10A/125V. If you are using a power supply higher than this rating, then a pow
Inhaltszusammenfassung zur Seite Nr. 10
FITTING AND REMOVAL OF BASE : ProLite E2201W CAUTION Install the stand on a stable surface. The monitor may cause injury or damage if it falls or is dropped. Do not give a strong impact to the monitor. It may cause damage. Unplug the monitor before installation to avoid electric shock or damage. Hold the monitor and push the post down Press the stopper at the back of the stand into the stand. and remove the stand from the post. Press the stopper Stand FITTING AND REMOVAL OF
Inhaltszusammenfassung zur Seite Nr. 11
CONTROLS AND CONNECTORS : ProLite E2201W Power Switch ( ) A Menu Button (MENU) B + Button ( + ) C – Button ( – ) D Auto Button (AUTO) E Input Button (SOURCE) F Power Indicator G NOTE Blue: Normal operation Orange: Power Management Auto (Signal Select) When no signal is received from the system, the display enters into its Power Management Mode reducing power consumption to < than 2W. Analog / Digital (Signal Select) The monitor enters into power management mode which reduces
Inhaltszusammenfassung zur Seite Nr. 12
CONTROLS AND CONNECTORS : ProLite E2202WS / E2202WSV Power Switch ( ) A Menu Button (MENU) B + Button ( ) C – Button ( ) D Auto Button (AUTO) E Input Button (SOURCE)* F Power Indicator G NOTE Blue: Normal operation Orange: Power Management Auto (Signal Select) When no signal is received from the system, the display enters into its Power Management Mode reducing power consumption to < than 2W. Analog / Digital (Signal Select) The monitor enters int
Inhaltszusammenfassung zur Seite Nr. 13
CONNECTING YOUR MONITOR : ProLite E2201W Ensure that both the computer and the monitor are switched off. A Connect the computer to the monitor with the signal cable. (See page 32 for CONNECTOR PIN B ASSIGNMENT.) Connect the Power Cable to the monitor first and then to the power supply. C NOTE The signal cables used for connecting the computer and monitor may vary with the type of computer used. An incorrect connection may cause serious damage to both the monitor and the computer. The cable supp
Inhaltszusammenfassung zur Seite Nr. 14
CONNECTING YOUR MONITOR : ProLite E2202WS / E2202WSV Ensure that both the computer and the monitor are switched off. A Connect the computer to the monitor with the signal cable. (See page 32 for CONNECTOR PIN B ASSIGNMENT.) Connect the monitor to the audio equipment with the Audio Cable when using the audio features. C D Connect the Power Cable to the monitor first and then to the power supply. NOTE The signal cables used for connecting the computer and monitor may vary with the type of compute
Inhaltszusammenfassung zur Seite Nr. 15
COMPUTER SETTING Signal Timing Change to the desired signal timing listed on page 31: COMPLIANT TIMING. Windows 95/98/2000/Me/XP/Vista Plug & Play The iiyama LCD monitor complies with DDC2B of VESA standard. The Plug & Play function runs on Windows 95/98/2000/Me/XP/Vista by connecting the monitor to DDC2B compliant computer with the Signal Cable supplied. Windows 95/98/2000/Me/XP/Vista Monitor Information File for iiyama monitors may be necessary for your computer and obtained via the Internet
Inhaltszusammenfassung zur Seite Nr. 16
OPERATING THE MONITOR To create the best picture, your iiyama LCD monitor has been preset at the factory with the COMPLIANT TIMING shown on page 31. You are also able to adjust the picture by following the button operation shown below. For more detailed adjustments, see page 21 for SCREEN ADJUSTMENTS. Press the Menu Button to start the On Screen Display feature. There are ((((( additional Menu pages which can be switched by using the +/– Buttons. Displayed while Lock Out is active. Displayed whi
Inhaltszusammenfassung zur Seite Nr. 17
ADJUSTMENT MENU CONTENTS Direct You can skip the Menu pages and display an adjustment scale directly by using the following button operations. 1 Brightness / Contrast / Volume* / DCR: To display direct menu press either of the +/- Buttons. Continue to use the +/- Buttons to select the adjustments required. DCR DCR: Select on the Direct Menu. Off: Typical Contrast Ratio On: Increased Contrast Ratio DCR adjusts brightness according to the image, and improve the contrast ratio NOTE up to 2000:1
Inhaltszusammenfassung zur Seite Nr. 18
Analog Input Menu : 1 (Analog) DCR OFF Menu:1 1680 × 1050 H:65.4KHz V:60.1Hz Adjustment Item Problem / Option Button to Press Too dark 1 Direct Brightness * Too bright Too dull Direct Contrast Too intense 2 Clock * To correct flickering text or lines 2 Phase * To correct flickering text or lines Too low V-Position Too high Too far to the left H-Position Too far to the right Return to Menu Highlight “Menu : 1” again. 1 * Adjust the Brightness when you are using the monitor
Inhaltszusammenfassung zur Seite Nr. 19
Menu : 2 DCR OFF Menu:2 (Analog) 1680 × 1050 H:65.4KHz V:60.1Hz Adjustment Item Problem / Option Button to Press NO Return to Menu. 3 Auto Set-up * Adjust Clock, Phase, V-Position and H-Position YES Direct automatically. Setting Off The Auto Set-up is not performed when the signal input is changed. Adjust Clock, Phase, V-Position and H-Position On automatically when the signal input is changed. NOTE The brightness of screen varies for several se
Inhaltszusammenfassung zur Seite Nr. 20
Menu : 2 (Analog) Adjustment Item Problem / Option Off Normal Gamma Mode1 High contrast Mode2 Dark Off Normal Economy Mode Mode1 Brightness of back-light is reduced. Mode2 Brightness of back-light is reduced more than Mode1. NOTE is displayed while Economy Mode is active. Return to Menu Highlight “Menu : 2” again. 16 OPERATING THE MONITOR ENGLISH
