Inhaltszusammenfassung zur Seite Nr. 1
User’s Guide
Flat Panel Monitor L2335
Document Part Number: 345093-001
October 2003
Inhaltszusammenfassung zur Seite Nr. 2
© Copyright 2003 Hewlett-Packard Development Company, L.P. The information contained herein is subject to change without notice. Microsoft, MS-DOS, Windows, and Windows NT are trademarks of Microsoft Corporation in the U.S. and other countries. The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technica
Inhaltszusammenfassung zur Seite Nr. 3
Contents 1 Product Features 2 Safety and Maintenance Guidelines Important Safety Information. . . . . . . . . . . . . . . . . . . . . . 2–1 Maintenance Guidelines. . . . . . . . . . . . . . . . . . . . . . . . . . 2–2 Cleaning the Monitor. . . . . . . . . . . . . . . . . . . . . . . . . 2–4 Shipping the Monitor. . . . . . . . . . . . . . . . . . . . . . . . . 2–4 3 Setting Up the Monitor Selecting the Signal Connectors and Cable . . . . . . . . . . . 3–5 Removing the Monitor Base . . . . .
Inhaltszusammenfassung zur Seite Nr. 4
Contents Using the Worldwide Web. . . . . . . . . . . . . . . . . . . . . . . . A–2 Preparing to call Technical Support. . . . . . . . . . . . . . . . . A–3 B Specifications Flat Panel Monitor L2335 . . . . . . . . . . . . . . . . . . . . . . . . B–1 Recognizing Preset Display Resolutions. . . . . . . . . . B–3 Entering User Modes. . . . . . . . . . . . . . . . . . . . . . . . . B–4 Using the Energy Saver Feature . . . . . . . . . . . . . . . . B–5 C Agency Regulatory Notices Federal Communicati
Inhaltszusammenfassung zur Seite Nr. 5
1 Product Features The Flat Panel Monitor L2335 has an active matrix, thin-film transistor (TFT), liquid crystal display (LCD). The monitor features include: ■ Large wide screen 23-inch (58.4 cm) viewable area display. ■ 1920 × 1200 resolution, plus full-screen support for lower resolutions. ■ Wide viewing angle to allow viewing from a sitting or standing position, or moving side-to-side. ■ Tilt and swivel adjustment capabilities. ■ Removable base for flexible mounting solutions. ■ Multiple
Inhaltszusammenfassung zur Seite Nr. 6
Product Features ■ On-Screen Display (OSD) adjustments in English, Dutch, French, Italian, Spanish, and German for ease of set-up and screen optimization. ■ Software and Reference Library CD includes an information file (INF), Image Color Matching file (ICM), and product documentation. ■ Energy Saver feature for Energy Star compliance. ■ AssetControl ■ Compliant with the following regulated specifications: ❏ EPA ENERGY STAR ❏ European Union CE Directives ❏ Swedish MPR II 1990 ❏ Swedish TCO
Inhaltszusammenfassung zur Seite Nr. 7
2 Safety and Maintenance Guidelines Important Safety Information A power cord is included with your monitor. If another cord is used, use only a power source and connection appropriate for this monitor. For information on the correct power cord set to use with your monitor, refer to the “Power Cord Set Requirements” section in Appendix C. WARNING: To reduce the risk of electric shock or damage to your Å equipment, do not disable the power cord grounding feature. This equipment is designed
Inhaltszusammenfassung zur Seite Nr. 8
Safety and Maintenance Guidelines CAUTION: For the protection of your monitor, as well as your Ä computer, connect all power cords for your computer and its peripheral devices (such as a monitor, printer, scanner) to some form of surge protection device such as a power strip or Uninterruptible Power Supply (UPS). Not all power strips provide surge protection; the power strips must be specifically labeled as having this ability. Use a power strip whose manufacturer offers a Damage Replaceme
Inhaltszusammenfassung zur Seite Nr. 9
Safety and Maintenance Guidelines ■ Unplug your monitor from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning. If the screen requires additional cleaning, use an antistatic screen cleaner. CAUTION: Do not use benzene, thinner, ammonia, or any other Ä volatile substances to clean your monitor or the screen. These chemicals may damage the cabinet finish as well as the screen. ■ Slots and openings in the cabinet are provided for ven
Inhaltszusammenfassung zur Seite Nr. 10
Safety and Maintenance Guidelines Cleaning the Monitor To clean the monitor, follow these steps: 1. Turn off the monitor and the computer. 2. Dust the monitor by wiping the screen and the cabinet with a soft, clean cloth. If the screen requires additional cleaning, use a clean cloth dampened with isopropyl alcohol. CAUTION: Do not use benzene, thinner, ammonia, or any volatile Äsubstance to clean the monitor screen or cabinet. These chemicals may damage the monitor. Never use water to clean
Inhaltszusammenfassung zur Seite Nr. 11
3 Setting Up the Monitor To set up the monitor, ensure that the power is turned off to the monitor, computer system, and other attached devices, then follow these steps: 1. Place the monitor in a convenient, well-ventilated location near your computer. 2. Connect one end of the monitor signal cable to the video connector on the rear panel of the computer, and the other end to the back of the monitor. The DVI-D cable supplied with this monitor is for digital- ✎ to-digital connection only. Y
Inhaltszusammenfassung zur Seite Nr. 12
Setting Up the Monitor 3. Connect the power cable to the back of the monitor, and the other end of the power cable to an electrical wall outlet. 3–2 www.hp.com User’s Guide
Inhaltszusammenfassung zur Seite Nr. 13
Setting Up the Monitor 4. Adjust the monitor as needed for your comfort using the monitor’s tilt, swivel, and height adjustment capabilities. User’s Guide www.hp.com 3–3
Inhaltszusammenfassung zur Seite Nr. 14
Setting Up the Monitor 3–4 www.hp.com User’s Guide
Inhaltszusammenfassung zur Seite Nr. 15
Setting Up the Monitor CAUTION: To reduce the risk of electric shock or damage to your Å equipment: Do not disable the power cord grounding plug. The grounding plug is an important safety feature. Plug the power cord into a grounded (earthed) electrical outlet that is easily accessible at all times. Disconnect power from the monitor by unplugging the power cord from the electrical outlet. Do not place anything on power cords or cables. Arrange them so that no one may accidentally s
Inhaltszusammenfassung zur Seite Nr. 16
Setting Up the Monitor Removing the Monitor Base You can remove the monitor base to mount the monitor on a wall, swing arm, or other mounting fixture. Read the caution and warning statements below before beginning the procedure. CAUTION: Before beginning to disassemble the monitor, be sure Ä the monitor is turned off and the power and signal cables are both disconnected. Lay the front bezel down on a soft area to prevent it from getting scratched, defaced, or broken. WARNING: Before remov
Inhaltszusammenfassung zur Seite Nr. 17
Setting Up the Monitor 2. Remove the four screws as shown in the following illustration. CAUTION: Ensure that the bottom of the monitor base is positioned Ä over a table or desktop before removing the base from the monitor. 3. Remove the monitor base from the monitor. User’s Guide www.hp.com 3–7
Inhaltszusammenfassung zur Seite Nr. 18
Setting Up the Monitor Mounting the Monitor 1. Remove the monitor base. Refer to “Removing the Monitor Base” steps in the previous section. When the base is removed, four threaded mounting holes are exposed on the monitor panel to be used for mounting purposes. These mounting holes are spaced 100 mm apart and are compliant with the Video Electronics Standards Association (VESA) standard for mounting flat panel displays. 2. Mount the monitor to a swing arm or other mounting fixture by foll
Inhaltszusammenfassung zur Seite Nr. 19
4 Operating the Monitor Installing the Information Files The CD-ROM included with this monitor contains two information files to be installed onto your computer; an .INF file and an .ICM file. ■ The .INF file defines monitor resources and provides specifications used by most operating systems to install support software for certain hardware devices. The .INF file ensures monitor compatibility and optimization with your computer’s graphics adapter. INF files are also downloadable by click
Inhaltszusammenfassung zur Seite Nr. 20
Operating the Monitor Front Panel Components No. Icon Control Function 1 PiP PiP button Activates Picture in Picture (PiP) window 2 input Signal Input Signal input selection - scrolls button through VGA-Analog, DVI-Analog, DVI-Digital, Super video, composite video, and component video input 3 auto Auto button Auto adjustment of displayed image 4 OSD Adjust Select and adjust the OSD Menu settings Selects VGA input when OSD is not active 4–2 www.hp.com User’s Guide
