Inhaltszusammenfassung zur Seite Nr. 1
HP L1750 and L1950 LCD Monitors
User Guide
Inhaltszusammenfassung zur Seite Nr. 2
© 2007 Hewlett-Packard Development Company, L.P. Microsoft, Windows, and Windows Vista are either trademarks or registered trademarks of Microsoft Corporation in the United States and/or other countries. All other product names mentioned herein may be trademarks of their respective companies. Hewlett-Packard Company shall not be liable for technical or editorial errors or omissions contained herein or for incidental or consequential damages in connection with the furnishing, performance, or use
Inhaltszusammenfassung zur Seite Nr. 3
About This Guide This guide provides information on setting up the monitor, installing drivers, using the on-screen display menu, troubleshooting and technical specifications. WARNING! Text set off in this manner indicates that failure to follow directions could result in bodily harm or loss of life. CAUTION: Text set off in this manner indicates that failure to follow directions could result in damage to equipment or loss of information. NOTE: Text set off in this manner provides important supp
Inhaltszusammenfassung zur Seite Nr. 4
iv About This Guide
Inhaltszusammenfassung zur Seite Nr. 5
Table of contents 1 Product Features HP L1750 and L1950 ........................................................................................................................... 1 2 Safety and Maintenance Guidelines Important Safety Information ................................................................................................................ 3 Maintenance Guidelines .................................................................................................................
Inhaltszusammenfassung zur Seite Nr. 6
Installing the HP Display LiteSaver Software .................................................................... 29 sRGB Support .................................................................................................................................... 30 Changing the Color Temperature ...................................................................................... 30 Installing the sRGB ICM File for Microsoft Windows 2000 and Windows XP .................... 31 Installing the sRG
Inhaltszusammenfassung zur Seite Nr. 7
1 Product Features HP L1750 and L1950 The flat panel monitors have an active matrix, thin-film transistor (TFT), liquid crystal display (LCD). The monitor features include: L1750 model, 17-inch (43.2 cm) viewable area display with 1280 × 1024 resolution, plus full-screen ● support for lower resolutions L1950 model, 19-inch (48.3 cm) viewable area display with 1280 x 1024 resolution, plus full-screen ● support for lower resolutions ● Wide viewing angle to allow viewing from a sitting or standing
Inhaltszusammenfassung zur Seite Nr. 8
Software and documentation CD that includes software, monitor drivers, and product ● documentation ● Energy saver feature to meet requirements for reduced power consumption Intelligent Management AssetControl ● Compliant with the following regulated specifications: ● ◦ European Union CE Directives ◦ Swedish MPR II 1990 ◦ Swedish TCO Requirements ◦ Energy Star 2 Chapter 1 Product Features
Inhaltszusammenfassung zur Seite Nr. 9
2 Safety and Maintenance Guidelines Important Safety Information A power cord is included with the monitor. If another cord is used, use only a power source and connection appropriate for this monitor. For information on the correct power cord set to use with the monitor, refer to the Power Cord Set Requirements on page 40 in Appendix C. WARNING! To reduce the risk of electric shock or damage to the equipment: • Do not disable the power cord grounding feature. The grounding plug is an important
Inhaltszusammenfassung zur Seite Nr. 10
Maintenance Guidelines To enhance the performance and extend the life of the monitor: ● Do not open the monitor cabinet or attempt to service this product yourself. Adjust only those controls that are covered in the operating instructions. If the monitor is not operating properly or has been dropped or damaged, contact an authorized HP dealer, reseller, or service provider. Use only a power source and connection appropriate for this monitor, as indicated on the label/ ● back plate of the monitor
Inhaltszusammenfassung zur Seite Nr. 11
3 Setting Up the Monitor To set up the monitor, ensure that the power is turned off to the monitor, computer system, and other attached devices, then follow the instructions below. Unfolding the Monitor Pedestal Base 1. Lift the monitor from its box and place it on a flat surface with the display head facing up. 2. Pivot the display head from portrait to landscape position (1). 3. Remove the swivel locking pin (2). Figure 3-1 Removing the Swivel Locking Pin Unfolding the Monitor Pedestal Base 5
Inhaltszusammenfassung zur Seite Nr. 12
4. Using both hands on the outer edges of the display bezel, pull up gently on the monitor display head (1) to extend the pedestal base (2) to the desired height. CAUTION: Do not touch the surface of the LCD panel. Pressure on the panel may cause non- uniformity of color or disorientation of the liquid crystals. If this occurs the screen will not recover to its normal condition. Figure 3-2 Unfolding the Monitor Pedestal Base 6 Chapter 3 Setting Up the Monitor
Inhaltszusammenfassung zur Seite Nr. 13
Rear Components Figure 3-3 Rear Components Component Function 1 AC Power Connector Connects the AC power cord to the monitor. 2 Audio In (select models) Connects the audio cable to the monitor's internal speakers (select models) 3 USB Downstream Connects optional USB devices to the monitor. Connectors (2) (select models) 4 USB Upstream Connects the USB hub cable to the monitor's USB hub Connector (select connector and to a host USB port/hub. models) 5 DVI (select models) Connects DVI-D cable to
Inhaltszusammenfassung zur Seite Nr. 14
Connecting the Cables 1. Place the monitor in a convenient, well-ventilated location near the computer. 2. Connect a VGA signal cable or DVI-D signal cable. NOTE: For models with both VGA and DVI-D connectors, the monitor is capable of supporting either analog or digital input. The video mode is determined by the video cable used. The monitor will automatically determine which inputs have valid video signals. The inputs can be selected by pressing the +/Input button on the front panel or through
Inhaltszusammenfassung zur Seite Nr. 15
4. Connect one end of the provided USB cable to the USB hub connector on the rear panel of the computer, and the other end to the upstream USB connector on the monitor (on select models). Figure 3-5 Connecting the USB Cable WARNING! To reduce the risk of electric shock or damage to the equipment: Do not disable the power cord grounding plug. The grounding plug is an important safety feature. Plug the power cord into a grounded (earthed) electrical outlet that is easily accessible at all times.
Inhaltszusammenfassung zur Seite Nr. 16
5. Connect one end of the power cable to the AC power connector on the back of the monitor, and the other end to an electrical wall outlet. Figure 3-6 Connecting the Power Cable 6. Place the cables through the cable management channel on the side of the monitor base. Figure 3-7 Using the Cable Management Feature 10 Chapter 3 Setting Up the Monitor
Inhaltszusammenfassung zur Seite Nr. 17
Adjusting the Monitor 1. Tilt the monitor's panel forward or backward to set it to a comfortable eye level. Figure 3-8 Tilting the Monitor 2. Swivel the monitor to the left or right for the best viewing angle (select models). Figure 3-9 Swiveling the Monitor Adjusting the Monitor 11
Inhaltszusammenfassung zur Seite Nr. 18
3. Adjust the monitor's height so that it is parallel to your eye height for a comfortable viewing position (select models). Figure 3-10 Adjusting the Height 4. Pivot the monitor clockwise from landscape to portrait orientation viewing to adapt to your application (select models). Figure 3-11 Pivoting the Monitor NOTE: To view information on the screen in portrait mode, you will need to install the Pivot Pro software included on the software and documentation CD. The position of the OSD menu c
Inhaltszusammenfassung zur Seite Nr. 19
Turning on the Monitor 1. Press the power button on the computer to turn it on. 2. Press the power button on the front of the monitor to turn it on. CAUTION: Burn-in image damage may occur on monitors that display the same static image on screen for a prolonged period of time.* To avoid burn-in image damage on the monitor screen, you should always activate a screen saver application or turn off the monitor when it is not in use for a prolonged period of time. Image retention is a condition that
Inhaltszusammenfassung zur Seite Nr. 20
Connecting USB Devices Two USB connectors (on select models) are used to connect devices such as a digital camera, USB keyboard, or USB mouse. NOTE: You must connect the USB hub cable from the monitor to the computer to enable the USB 2.0 ports on the monitor. Refer to Step 4 in Connecting the Cables on page 8. Figure 3-12 Connecting USB Devices 14 Chapter 3 Setting Up the Monitor
