Inhaltszusammenfassung zur Seite Nr. 1
HP LP1965 19", LP2065 20", and LP2465
24" LCD Monitors
User Guide
Inhaltszusammenfassung zur Seite Nr. 2
© 2005–2006 Hewlett-Packard Development Company, L.P. Microsoft, Windows, and the Windows logo are trademarks of Microsoft Corporation in the U.S. and other countries. All other product names mentioned herein may be trademarks of their respective companies. Hewlett-Packard Company shall not be liable for technical or editorial errors or omissions contained herein or for incidental or consequential damages in connection with the furnishing, performance, or use of this material. The
Inhaltszusammenfassung zur Seite Nr. 3
About This Guide This guide provides information on setting up the monitor, installing drivers, using the on-screen display menu, troubleshooting and technical specifications. WARNING! Text set off in this manner indicates that failure to follow directions could result in bodily harm or loss of life. CAUTION Text set off in this manner indicates that failure to follow directions could result in damage to equipment or loss of information. NOTE Text set off in this manner provides important
Inhaltszusammenfassung zur Seite Nr. 4
iv About This Guide ENWW
Inhaltszusammenfassung zur Seite Nr. 5
Table of contents 1 Product Features HP LP1965, LP2065, and LP2465 Models ........................................................................................... 1 2 Safety and Maintenance Guidelines Important Safety Information ................................................................................................................. 3 Maintenance Guidelines ........................................................................................................................
Inhaltszusammenfassung zur Seite Nr. 6
Installing the HP Display LiteSaver Software ..................................................................... 30 sRGB Support ...................................................................................................................................... 31 Changing the Color Temperature ....................................................................................... 31 Installing the sRGB ICM File for Microsoft Windows 2000 and Windows XP .................... 32 Append
Inhaltszusammenfassung zur Seite Nr. 7
1 Product Features HP LP1965, LP2065, and LP2465 Models The flat panel monitors have an active matrix, thin-film transistor (TFT), liquid crystal display (LCD). The monitor features include: ● LP1965 model, large 19-inch (48.3 cm) viewable area display with 1280 × 1024 resolution, plus full-screen support for lower resolutions ● LP2065 model, large 20.1-inch (51 cm) viewable area display with 1600 × 1200 resolution, plus full-screen support for lower resolutions ● LP2465 model, large
Inhaltszusammenfassung zur Seite Nr. 8
● AssetControl ● Compliant with the following regulated specifications: ● European Union CE Directives ● Swedish MPR II 1990 ● Swedish TCO Requirements 2 Chapter 1 Product Features ENWW
Inhaltszusammenfassung zur Seite Nr. 9
2 Safety and Maintenance Guidelines Important Safety Information A power cord is included with the monitor. If another cord is used, use only a power source and connection appropriate for this monitor. For information on the correct power cord set to use with the monitor, refer to the Power Cord Set Requirements section in Appendix C. WARNING! To reduce the risk of electric shock or damage to the equipment: • Do not disable the power cord grounding feature. The grounding plug is an importa
Inhaltszusammenfassung zur Seite Nr. 10
Maintenance Guidelines To enhance the performance and extend the life of the monitor: ● Do not open the monitor cabinet or attempt to service this product yourself. Adjust only those controls that are covered in the operating instructions. If the monitor is not operating properly or has been dropped or damaged, contact an authorized HP dealer, reseller, or service provider. ● Use only a power source and connection appropriate for this monitor, as indicated on the label/ back plate of the
Inhaltszusammenfassung zur Seite Nr. 11
3 Setting Up the Monitor To set up the monitor, ensure that the power is turned off to the monitor, computer system, and other attached devices, then follow the instructions below. NOTE Be sure the master power switch, located on the rear panel of the monitor, is in the off position. The master power switch turns off all power to the monitor. Installing the Monitor Pedestal Base NOTE Do not install the pedestal base if the monitor will be used on a wall, swing arm, or other mounting fixt
Inhaltszusammenfassung zur Seite Nr. 12
Rear Components Figure 3-2 Rear Components Component Function 1 Cable Lock Provision Provides slot for use with cable security locks. 2 Master Power Switch Turns off all power to the monitor. 3 AC Power Connector Connects the AC power cord to the monitor. 4 DVI-I Connectors Connects the DVI-I to VGA signal cable or DVI-D signal cable to the monitor. 5 USB Upstream Connects the monitor USB hub to a host USB port/hub. Connector 6 USB Downstream Connects optional USB devices to the monit
Inhaltszusammenfassung zur Seite Nr. 13
Selecting the Signal Connectors and Cables The monitor features two DVI-I connectors capable of supporting either analog or digital input. The video mode supported by the DVI-I connector is determined by the video cable used. ● For digital operation, use the DVI-D signal cable provided. Connect the DVI-D signal cable to a DVI-I connector on the monitor and the other end to the DVI connector on the computer. ● For analog operation, use the DVI-I to VGA signal cable provided. Connect the DV
Inhaltszusammenfassung zur Seite Nr. 14
Connecting the Monitor 1. Place the monitor in a convenient, well-ventilated location near the computer. 2. Connect one end of the USB hub cable to the USB connector on the rear panel of the computer, and the other end to the upstream USB connector on the monitor. Figure 3-5 Connecting the USB Cable WARNING! To reduce the risk of electric shock or damage to the equipment: • Do not disable the power cord grounding plug. The grounding plug is an important safety feature. • Plug the power
Inhaltszusammenfassung zur Seite Nr. 15
3. Connect one end of the power cable to the AC power connector on the back of the monitor, and the other end to an electrical wall outlet. Figure 3-6 Connecting the Power Cable 4. Place the cables through the cable management channel on the back of the monitor base. Figure 3-7 Using the Cable Management Feature ENWW Connecting the Monitor 9
Inhaltszusammenfassung zur Seite Nr. 16
Adjusting the Monitor 1. Tilt the monitor's panel forward or backward to set it to a comfortable eye level. Figure 3-8 Tilting the Monitor NOTE The 24" model has a tilt range of -5 to +25 degrees. 2. Swivel the monitor to the left or right for the best viewing angle. Figure 3-9 Swiveling the Monitor 10 Chapter 3 Setting Up the Monitor ENWW
Inhaltszusammenfassung zur Seite Nr. 17
3. Adjust the monitor's height so that it is parallel to your eye height for a comfortable viewing position. WARNING! A lock-down/release button on the front of the column prevents the display head of the 19" model from sliding up when the monitor is lifted. If the display head is locked in the lowest height position: a. Make sure that the monitor is safely positioned on a stable surface. b. Gently push down on the display head. c. While pushing down the display head, press the lock-down/
Inhaltszusammenfassung zur Seite Nr. 18
4. Pivot the monitor from landscape to portrait orientation viewing to adapt to your application. Figure 3-11 Pivoting the Monitor NOTE The 20" model (shown above) pivots counter-clockwise; the 19" and 24" models pivot clockwise. To view information on the screen in portrait mode, you will need to install the Pivot Pro software included on the software and documentation CD. Turning on the Monitor 1. Press the power switch to turn on the computer. 2. Press the master power switch on the
Inhaltszusammenfassung zur Seite Nr. 19
Connecting USB Devices The monitor provides four USB connectors, two on the side panel and two on the rear panel, used to connect devices such as a digital camera, USB keyboard, or USB mouse. NOTE You must connect the USB hub cable from the monitor to the computer to enable the USB 2.0 ports on the monitor. Refer to Step 2 in Connecting the Monitor. Figure 3-12 Connecting USB Devices ENWW Connecting USB Devices 13
Inhaltszusammenfassung zur Seite Nr. 20
Using the Accessory Rails The monitor features accessory rails on the rear that may be used to mount optional devices, such as the HP speaker bar, to attach to the LCD. Refer to the documentation included with the optional device for detailed mounting instructions. Figure 3-13 Using the Accessory Rails Feature Removing the Monitor Pedestal Base You can remove the monitor panel from the pedestal base to mount the panel on a wall, a swing arm, or other mounting fixture. This monitor has a
