Inhaltszusammenfassung zur Seite Nr. 1
English
Monitor
Operating Manual
SCENICVIEW
P17-2 / P19-2 / P20-2
Inhaltszusammenfassung zur Seite Nr. 2
SCENICVIEW P17-2 / P19-2 / P20-2 i Operation of the monitor The monitor offers the following possibilities that enable it to be optimally adjusted for the respective user and the respective situation. Adjusting height, rake and rotation The monitor height can be adjusted within a range of approx. 2.5 inch/70 mm. ► Grasp the monitor with both hands on the right and left edge of the casing and move it upward or downward. The rake of the monitor can be adjusted by -2° (forward)
Inhaltszusammenfassung zur Seite Nr. 3
SCENICVIEW P17-2 / P19-2 / P20-2 Adjusting portrait format The monitor can be turned from the "wide format" (landscape mode) into the "high format" position (portrait mode). Ê Grasp the monitor with both hands on the right and left edge of the casing, move it into the highest position and turn it clockwise until it is in the portrait position. You must use corresponding software (pivot software) so that the screen display is also shown in the portrait mode. This software is included in
Inhaltszusammenfassung zur Seite Nr. 4
SCENICVIEW P17-2 / P19-2 / P20-2 Changing the monitor settings When putting the monitor into operation for the first time, the screen display should be optimally adapted to the screen controller used and adjusted in accordance with your needs. Choosing basic monitor settings using the supplied software If one of the operating systems Windows 95/98, Windows NT, Windows Me, Windows 2000, Windows XP or OS/2 (with Windows emulation installed) is used, the basic monitor settings can be set wi
Inhaltszusammenfassung zur Seite Nr. 5
SCENICVIEW P17-2 / P19-2 / P20-2 Locking the OSD menu The OSD menu can be locked to prevent accidental or unauthorised changes to the monitor settings. ► Press and hold the SELECT/MENU button for a few seconds while you switch on the monitor with the ON/OFF switch. A message is displayed that the action has been performed. Please proceed in the same manner to release the locked OSD menu again. Locking the ON/OFF button The ON/OFF switch can be locked to prevent accidental or unauthorised
Inhaltszusammenfassung zur Seite Nr. 6
SCENICVIEW P17-2 / P19-2 / P20-2 The corresponding setting window (here: Image Adjust) is displayed (on the right-hand side). The first function (H-Position) is highlighted. ► If necessary, press the or button to 6 5 mark another function. ► Press the SELECT/MENU button to select the highlighted function. ► Press the or button to adjust the 6 5 value for the selected function. ► Press the EXIT/AUTO button to exit the function. ► If necessary, press the button or to 6 5 mark an
Inhaltszusammenfassung zur Seite Nr. 7
SCENICVIEW P17-2 / P19-2 / P20-2 Adjusting size and position Calling the Image adjust setting window H-Position Adjusting the horizontal position With this function you move the picture to the left or to the right. V-Position Adjusting the vertical position With this function you move the picture up or down. Clock Setting synchronisation With this function you adjust the picture width to eliminate vertical picture disturbances. Phase Eliminating picture interference With this functi
Inhaltszusammenfassung zur Seite Nr. 8
SCENICVIEW P17-2 / P19-2 / P20-2 Setting display of the OSD menu Calling the OSD Setup setting window Language Setting language for the OSD menu With this function you choose between English (default setting), French, German, Italian and Spanish as the language for the OSD menu. OSD Setting the horizontal position of the OSD menu H-Position With this function you move the OSD menu to the left or to the right. OSD Setting the vertical position of the OSD menu V-Position With this f
Inhaltszusammenfassung zur Seite Nr. 9
SCENICVIEW P17-2 / P19-2 / P20-2 Displaying information Calling the Information setting window With this function the model designation, serial number, resolution, H/V frequency, input signal and polarity of the synchronisation signal are displayed. Notes on ergonomic colour adjustment If you select colours for the display in your application programmes, take note of the information below. The primary colours blue and red on a dark background do not produce the minimum required contra
Inhaltszusammenfassung zur Seite Nr. 10
SCENICVIEW P17-2 / P19-2 / P20-2 Troubleshooting Should an error occur, first check the following points. If the distortion is still not eliminated, the monitor should, if possible, be checked on another computer. If you are unable to solve the problem, please inform our help desk. Having this problem? Check the following points: No screen display ► Check whether the main switch at the rear of the (power indicator does not light) monitor is switched on. ► Check whether the power cable o
Inhaltszusammenfassung zur Seite Nr. 11
SCENICVIEW P17-2 / P19-2 / P20-2 Having this problem? Check the following points: Picture is wrongly adjusted ► Press the SELECT/MENU button to activate the function Factory Recall. The Auto Processing message is displayed. Picture disturbances (vertical lines) ► Press the EXIT/AUTO button to perform the auto- adjustment of the screen. Picture disturbances (horizontal lines, ► Press the EXIT/AUTO button to perform the auto- picture noise) adjustment of the screen. The background lig
