Inhaltszusammenfassung zur Seite Nr. 1
USER’S MANUAL
50”/61” WIDE PLASMA DISPLAY
PDS5003W/PDS5004W/
PDS5003U/PDS5004U/
PDS6101W
Contents
Page Page
Before Use Adjustments
• Safety Precautions ··································· E-2–E-3 • Adjusting Pictures (PICTURE Menu)··· E-26–E-27
• Features ····························································E-4 • Adjusting Screen Position and Size
• Accessories ······················································ E-5 (POSITION/SIZE Menu) ························ E-28–E-29
• Handy Tips ·
Inhaltszusammenfassung zur Seite Nr. 2
DECLARATION OF CONFORMITY according to EN45014 We Fujitsu General (U.K.) Co. Limited of Unit 150, Centennial Park, Centennial Avenue Elstree, Hertfordshire, WD6 3SG Manufacturer: Shinjyo Fujitsu General Limited 702-3 Kanazawa Shinjyo-shi Yamagata Japan declares under our sole responsibility that the product, Type: 50” PLASMA DISPLAY Model Name: PDS5003W to which this declaration relates are in conformity with the following standards; European Standards: EMC: a. EN55022 1994/A1:1995/A2:1997/A3:19
Inhaltszusammenfassung zur Seite Nr. 3
DECLARATION OF CONFORMITY according to EN45014 We Fujitsu General (U.K.) Co. Limited of Unit 150, Centennial Park, Centennial Avenue Elstree, Hertfordshire, WD6 3SG Manufacturer: Shinjyo Fujitsu General Limited 702-3 Kanazawa Shinjyo-shi Yamagata Japan declares under our sole responsibility that the product, Type: 50” PLASMA DISPLAY Model Name: PDS5004W to which this declaration relates are in conformity with the following standards; European Standards: EMC: a. EN55022 1994/A1:1995/A2:1997/A3:19
Inhaltszusammenfassung zur Seite Nr. 4
DECLARATION OF CONFORMITY according to EN45014 We Fujitsu General (U.K.) Co. Limited of Unit 150, Centennial Park, Centennial Avenue Elstree, Hertfordshire, WD6 3SG Manufacturer: Shinjyo Fujitsu General Limited 702-3 Kanazawa Shinjyo-shi Yamagata Japan declares under our sole responsibility that the product, Type: 61” PLASMA DISPLAY Model Name: PDS6101W to which this declaration relates are in conformity with the following standards; European Standards: EMC: a. EN55022 1994/A1:1995/A2:1997/A3:19
Inhaltszusammenfassung zur Seite Nr. 5
SAFETY PRECAUTIONS FCC NOTICE • PDS5003W/PDS5003U/PDS6101W: A Class A digital device This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instr
Inhaltszusammenfassung zur Seite Nr. 6
– Do not place this product on an unstable cart, stand, or table. The product may fall, causing serious injury to a child or adult, and serious damage to the product. The product should be mounted according to the manufacturer’s instructions, and should use a mount recommended by the manufacturer. – When the product is used on a cart, care should be taken to avoid quick stops, excessive force, and uneven surfaces which may cause the product and cart to overturn, damaging equipment or causing p
Inhaltszusammenfassung zur Seite Nr. 7
FEATURES This display uses a plasma display panel and is only 9.8 cm (50”) /11.8 cm (61”) deep. With its high picture quality and performance, it is perfectly suited for multimedia applications. Variety of input signals • In addition to video, S-video, and RGB, signals, this display supports input of high-quality video signals such as DVD and HDTV. • The display has an RGB input terminal to receive digital RGB signal of DVI standard to display a high definition picture quality in addition to mD
Inhaltszusammenfassung zur Seite Nr. 8
ACCESSORIES CHECKING ACCESSORIES One remote control Two AA batteries One user’s manual One power cable Two big ferrite cores and two small ferrite cores Manual (50”U,61”W Type) (50”W Type) HANDY TIPS • Pictures may become “burnt” into the screen phosphors if the screen is left on for extended periods. To ensure that the display has a prolonged service life, be sure to use a screen orbiter, white screen. This will ensure the same picture or pattern is not constantly displayed for long periods
Inhaltszusammenfassung zur Seite Nr. 9
INSTALLATION To prevent the display’s internal components from overheating, make sure that the display is installed in a well-ventilated location. Be sure to use the optional desktop stand, ceiling-mounting unit, wall-mounting unit and other unit when installing this display. Also, be sure that your dealer performs the installation. See the appropriate instruction manual for more information on the installation hardware you select. To ensure proper heat radiation, provide at least as much space
Inhaltszusammenfassung zur Seite Nr. 10
PART NAMES AND FUNCTIONS Front (both 50" and 61") 1 Power indicator lamp This lamp shows the state of the power supply. Lit (red): Power OFF (stand-by) Lit (green): Power ON Lit (orange): Power saving (DPMS: Power saving function) mode ON Flashing (red): Malfunction (Flashes differently depending on the type of malfunction. See P. E-46 for more information.) 2 Remote control signal receiver Receives signals from the remote control. 3 Power button Turns the power ON or OFF (stand-by). 4 Input mo
Inhaltszusammenfassung zur Seite Nr. 11
PART NAMES AND FUNCTIONS (Continued) Bottom (50”) Bottom (61”) 1 OFF/STD-BY switch OFF :The power indicator lamp goes off, and the power can’t be turned on by the power button. The power is partly supplied. STD-BY :The power indicator lamp lights red, and the power can be turned on or off by the power button. 2 RGB 2 input terminal (RGB 2 INPUT/mD-sub) Connect this terminal to the PC’s display (analog RGB) output terminal or decoder (digital broadcast tuner, etc.) output terminal. 3 RGB 1 inp
Inhaltszusammenfassung zur Seite Nr. 12
9 Sound 1 input terminal (AUDIO 1 INPUT) Connect this terminal to the sound output terminal of your VCR, etc. (See P.E-37 for the selection of audio input for video input.) 0 RGB 3 synchronization switch (SYNC SW TTL/ANALOG (75 Ω )) This switch is used to terminate horizontal (H) terminal and vertical (V) terminal, out of RGB3 input terminals, with 75 Ω . TTL : Does not terminate. ANALOG (75 Ω ): Terminates. A+B RGB 3 input terminal (RGB 3 INPUT/BNC) Connect this terminal to the PC's displ
Inhaltszusammenfassung zur Seite Nr. 13
PART NAMES AND FUNCTIONS (Continued) Description of Input Terminals DVI-D terminal (RGB 1 INPUT/DVI-D) RGB2 input terminal (RGB2 INPUT/mD-sub) Pin No. Input signal Pin No. Input signal 1Red 9 — 2 Green 10 Ground 3 Blue 11 — 4 — 12 — 5 Ground 13 Horizontal synchronization 6 Ground 14 Vertical synchronization 7 Ground 15 — 8 Ground Frame Ground RS-232C terminal (RS-232C) Pin No. Signal 1 DCD (Data Carrier Detect) 2 RD (Received Data) 3 TD (Transmit Data) 4 DTR (Data Terminal ready) 5 GND (Ground)
Inhaltszusammenfassung zur Seite Nr. 14
Remote Control 1 Power ON button [POWER ON] ➝ (See P. E-16.) 2 Power OFF button [POWER OFF] ➝ (See P. E-16.) 1 2 3 RGB input mode selector button [RGB] ➝ (See P. E-17.) 3 5 4 4 Video input mode selector button [VIDEO] ➝ (See P. E-17.) 5 Wide screen selector button [WIDE] ➝ (See P. E-18–E-19.) 6 6 Menu button [MENU] ➝ (See P. E-20–E-41.) 8 7 Use this button to display a desired menu for adjusting the picture. 7 Volume adjustment buttons [VOL +/-] ➝ (See P. E-16.) 9 Adjust the volume. Press the +
Inhaltszusammenfassung zur Seite Nr. 15
USING THE REMOTE CONTROL PRECAUTIONS To prevent malfunction, be sure not to apply any form of severe shock to the remote control. To prevent malfunction or deformation, be sure not to allow the remote control to become wet; also, keep it away from hot locations or heating equipment. Be sure not to clean the remote control using a cloth dampened in any volatile solvent, such as benzene or thinner. EFFECTIVE RANGE FOR THE REMOTE CONTROL Point the remote control at the display’s signal receiver whe
Inhaltszusammenfassung zur Seite Nr. 16
CONNECTING THE DISPLAY TO EXTERNAL EQUIPMENT Be sure to turn OFF the power to the display and external equipment before making any connections. No cables are supplied with the display for connection to external equipment. The type of cable to be used varies depending on the PC model. Contact your dealer for more information. RECEPTACLE Make sure that the power cable’s grounding wire is grounded. The display comes with a 3-prong power plug; one prong is connected to the grounding wire. If you
Inhaltszusammenfassung zur Seite Nr. 17
CONNECTING THE DISPLAY TO EXTERNAL EQUIPMENT(Continued) (50”) COMPONENT VIDEO INPUT (color difference input) / RGB3 INPUT VIDEO S-VIDEO RS-232C RGB1 RGB2 INPUT INPUT INPUT INPUT AUDIO1 POWER AUDIO2 AUDIO3 EXT (DVI-D) (mD-sub) INPUT INPUT INPUT INPUT SP To video To S-video To RS-232C To display To display To sound To sound To sound To To To color difference output output output (digital RGB) (analog RGB) output output output speaker receptacle output terminal / terminal terminal terminal output
Inhaltszusammenfassung zur Seite Nr. 18
(61”) VIDEO INPUT COMPONENT POWER VIDEO INPUT RGB2 RGB1 INPUT (color difference INPUT INPUT RS-232C S-VIDEO AUDIO1 AUDIO2 AUDIO3 EXT input) / (mD-sub) (DVI-D) INPUT INPUT INPUT INPUT SP RGB3 INPUT To receptacle To color difference To display To display To RS-232C To S-video To video To sound To sound To sound To output terminal / (analog RGB) (digital RGB) output output output output output output speaker output output terminal terminal terminal To display terminal terminal terminal (analog
Inhaltszusammenfassung zur Seite Nr. 19
BASIC OPERATIONS TURNING ON THE POWER Select the OFF/STD-BY switch 1 at the STD-BY of the display. When you do so, the power indicator lamp turns red. (This applies only to 50”display.) Press on the remote control. 2 When you do so, the power indicator lamp turns green. Press or to select a 3 desired input mode. * You can also use the switches on the display’s control panel to accomplish these steps. TURNING OFF THE POWER Press when the power is ON. The power indicator lamp turns red. AD
Inhaltszusammenfassung zur Seite Nr. 20
SELECTING INPUT MODE VIDEO INPUT MODE Press to select a desired input 1 mode. Each time you press , a different input mode appears. The sequence is as follows: Video: Displays pictures from equipment S-video mode connected to the Video terminal. S-video: Displays pictures from equipment connected to the S-video terminal. Comp.video: Displays pictures from equipment connected to the component video input terminal. * When RGB-PC is selected in BNC Input mode, Comp. video mode can not be input. (
